keemple KP-GW-01 User manual

Ordering Code: KP-GW-01

Table of contents
1. IMPORTANT SAFETY INFORMATION................................................................................................................................4
2. DEVICE DESCRIPTION.......................................................................................................................................................5
3. INSTALATION OF THE KEEMPLE GATEWAY...................................................................................................................6
3.1. WIFI CONFIGURATION OF THE GATEWAY ......................................................................................................................7
4. CONFIGURING THE KEEMPLE AUTOMATION SYSTEM ..................................................................................................8
4.1. INSTALATION OF THE KEEMPLE APPLICATION.............................................................................................................9
4.2. CREATE USER ACCOUNT.................................................................................................................................................9
4.2.1 Create user account by using client application..............................................................................................................9
4.2.2. Create user account by using web application...............................................................................................................10
4.3. ADD THE GATEWAY TO THE USER ACCOUNT .............................................................................................................11
4.3.1. Add the gateway by using client application..................................................................................................................11
4.3.2. Add the gateway by using web application ....................................................................................................................12
4.4. HOME SETUP...................................................................................................................................................................12
5. DEVICE MANAGEMENT...................................................................................................................................................13
5.1. MANAGEDEVICESBYUSINGCLIENTAPPLICATION ...............................................................................................................13
5.1.1. Addadevicetothegateway .....................................................................................................................................................14
5.1.2 Removeadevice ...................................................................................................................................................................14
5.1.3. Updatedevicenameandlocation .............................................................................................................................................15
5.2. MANAGEDEVICESBYUSING GATEWAY’S MAIN BUTTON .......................................................................................................15
5.2.1. Addadevicetothegateway .....................................................................................................................................................15
5.2.2. RemoveaZ-Wavedevice ........................................................................................................................................................15
6. CONTROLLING AND MONITORING DEVICES.................................................................................................................16
6.1 DEVICES BY LOCATION..................................................................................................................................................16
6.2 DEVICES BY TYPE...........................................................................................................................................................16
6.3 ADVANCED DEVICE CONFIGURATION ..........................................................................................................................16
7. SCENE MANAGEMENT ....................................................................................................................................................17
7.1. CREATE NEW SCENE......................................................................................................................................................17
7.2. CREATE NEW SCENE......................................................................................................................................................20
7.3. EDIT THE SCENE..............................................................................................................................................................20
7.4. DELETE THE SCENE........................................................................................................................................................20
7.5. DISABLE THE SCENE......................................................................................................................................................21
8. RESET NETWORK CONFIGURATION..............................................................................................................................21
9. RESET USER PREFERENCES .........................................................................................................................................21
10. FACTORY RESET.............................................................................................................................................................21
11. BUTTONS/FUNCTIONS ....................................................................................................................................................22
12. TECHNICAL DATA............................................................................................................................................................22
13. DECLARATIONS OF CONFORMITY................................................................................................................................22

4
Congratulations and thank you for purchasing KEEMPLE Automation
Gateway device. Below you will find useful operating guidelines.
WARNING!
The 5V port of this unit is to be connected only to the devices whose power feeding
meets the requirements for SELV (Safety Extra Low Voltage) and complies with Limited
Power Source according to IEC 60950-1.
1. IMPORTANT SAFETY INFORMATION
Before using Keemple Automation Gateway, please read the following information to
avoid any potential dangers:
1. Read the instructions carefully and follow the precautions in this manual. All
mains connections, must be carried out by a trained and qualified person
2. Use only the original mains adaptor supplied with the device
3. Disconnect the device from mains (mains chargers) before cleaning. Clean the
device with a damp cloth, do not use detergents
4. Do not use device in gas-filled environments
5. Do not place the device near heat sources
6. Do not expose the device to direct sunlight
7. Do not place cables and/or power supplies under heavy objects. Also, avoid
routes near sharp or abrasive objects and walkways
8. Keep out of reach of children
9. Do not carry out any maintenance on the device, instead contact your supplier
10. Make sure that ventilation slots and the cooling unit are not covered
11. As the device generates heat, this can lead to discoloration on the surface of
furniture. Make sure there is at least 10cm of clearance around the device
12. The device must not be located in the rooms with a high level of humidity e.g.
kitchen, bath- rooms, etc.
13. Under no circumstances should you open the device or the mains adaptor. A
qualified engineer must perform this out.
14. Do not touch any contacts on the device with your fingers or metal objects.
This could cause a short circuit
15. Do not handle the device when your hands are wet due to risk of electric shock

5
2. DEVICE DESCRIPTION
Keemple automation gateway takes central place in home automation system.
Combined with Keemple client (Android/iOS/HTML) applications and Keemple
cloud service it provides a turnkey platform that covers lighting,security,safety,
energy management and other aspects of the fast-growing home automation
markets.
By supporting the most popular wireless communication protocols today
(ZigBee, Z-Wave, IP), Keemple gateway communicates with connected
devices and enables users to monitor and control their home.
FRONT
Front button LED indicator
Power supply socket | Back button | Ethernet port
KEEMPLE automation gateway consists of:
•FRONT (main) button, which is used to manage home
automation devices
•BACK button, which is used to reset user data, reset the
gateway network, reboot the gateway and reset the gateway
to factory default settings
•LED indicator informs user about gateway status
•Power supply socket
•Ethernet
Use of these buttons is described in more detail in the corresponding section of this
manual (page 22).
Illustration 1: Cockpit automation gatew ay

6
Illustration 2: Ethernet connection
Illustration 3: WiFi connection
3. INSTALATION OF THE KEEMPLE GATEWAY
In order to install your KEEMPLE, please follow next steps:
1. Plug in the Home Automation Gateway to the AC power supply
2. Connect the Gateway to the home network router by using Ethernet (Illustration
2) or WiFi Connection (Illustration 3)
In case you have connected your gateway device to the home network router by using
Ethernet cable, the installation process is finished and you can proceed to the Section
4(Configuring the Keemple automation system).

7
Illustration 4: Device information
3.1. WIFI CONFIGURATION OF THE GATEWAY
In case you would like to connect the gateway device to the home network router by
using WiFi connection, please follow next steps:
1. After powering up, the gateway enters AP (Access Point) mode if Ethernet cable
is not connected. In AP mode LED will blink blue. In this mode gateway creates
its own WiFi network that allows the end user to configure it for connection to
home network router over WiFi (gateway’s SSID or network name is located on
the label on the backside of the device)
2. Connect your client device (PC, tablet or smart phone) to the WiFi network
created by gateway
3. In web browser of your client device launch default IP address printed on the
label on the backside of the gateway (typically 192.168.1.1). Device information
page, should be displayed as shown in Illustration 4
4. In main menu, select “WiFi configuration” page as shown in Illustration 5, after
which gateway should list all available WiFi networks in your home
Illustration 5: WiFi configuration

8
5. After selecting your home network router’s WiFi network, type in the password and,
press “Apply” button to finish WiFi configuration of your gateway
6. Upon successful operation, LED should go green indicating that your gateway is,
connected to your home network router’s WiFi network. Otherwise, repeat the
procedure starting from step 1
4. CONFIGURING THE KEEMPLE AUTOMATION
SYSTEM
Keemple Automation system consists of:
•Keemple application
•Keemple automation gateway
•Keemple cloud
Keemple application is intuitive and easy to use. Its comfortable graphical user interface
will smoothly guide users through the process of configuration of their space. The app
can be used both in-home or remotely –it is smart enough to connect to the gateway
directly if possible, to ensure the best user experience.
Keemple automation gateway takes central place in home automation system.
Combined with Keemple client (Android/iOS/HTML) applications and Keemple cloud
service it provides a turnkey platform that covers lighting, security, safety, energy
management and other aspects of the fast-growing home automation markets.
Keemple cloud plays an important role in Keemple automation system, since it enables
home control outside local network. Built around modern web technologies, it ensures
the highest security and robustness with the lowest latency in home automation
communication chain. It also allows monitoring and controlling of the home from any
browser-based device.
Please follow next steps for configuring Keemple Automation system:
Illustration 6: Our System

9
Illustration 8: Login dialog
Illustration 7: Account creation
1. Install Keemple client application
2. Create user account
3. Add the gateway to the user account
4. Home setup
4.1. INSTALATION OF THE KEEMPLE APPLICATION
In order to start configuring Keemple automation system, the user needs to install
Keemple application. By using client application, users can control their household
devices and manage theiraccounts as well as the list of their gateways and configuration
options.
Keemple client app is available for download at the Apple and Google application stores.
4.2. CREATE USER ACCOUNT
Account registration can be done in two ways:
1. By using client application
2. By using web application at https://cloud.yourKeemple.biz/
4.2.1 Create user account by using client application
Please follow next steps in order to create new account:
1. To create a new user account by using client application make sure that your
smart phone or tablet is connected to the Internet and start the application.
2. Tap the “Create new account” button on the login dialog (see Illustration 7)
3. Enter a valid email address and the password on the login dialog (Illustration 8)

10
Illustration 10: Mandatory information
Illustration 9: Personal information
4. Agree with Terms ofservice and Privacy Policy andtap the button . The complete
text of Terms of service and Privacy Policy can be reviewed by tapping the “Terms
of service” and “Privacy Policy” buttons
5. Enter the account details and tap the button . Entries indicated by an asterisk (*)
are mandatory entries. All other entries can also be filled in later (see Illustration 9)
6. Enter your personal information and tap the button to close the wizard (see
illustration 10)
7. Once the account was successfully registered, a verification link will be sent to the
email address specified in the account name (make sure to check Spam folder).
Otherwise, a failure notice will be displayed
8. Confirm the activation link sent in the email message
4.2.2. Create user account by using web application
Please follow next steps in order to create new account:
1. Visit https://cloud.yourKeemple.biz/
2. Tap the “Don’t have an account” button on the login dialog (see Illustration 11).
3. Enter your personal and login information on the login dialog (see Illustration 12).
4. Agree with Terms of service and Privacy Policy and tap the button REGISTER. The
complete text of Terms of service and Privacy Policy can be reviewed by tapping
the “Terms of service” and “Privacy Policy” buttons
5. Once the account has been successfully registered, a message with an activation
link will be sent to the email address specified in the account name (make sure to
check Spam folder). Otherwise, a failure notice will be displayed.
6. Confirm the activation link sent in the email message
Illustration 11: Login dialog
Illustration 12: Personal information