Keis W54-370889 User manual

These operating instructions are applicable for the
BLUETOOTH Keis Power Controller only.
BLUETOOTH
Power Controller
W54-370889
INSTRUCTIONS
www.keisapparel.com
POWER CONTROLLER
SAFETY AND ENVIRONMENT FIRST
For the full range of Keis accessories,
or further information, please visit the website:
TECHNICAL DATA
VOLTAGE: 12V only
POWER CAPACITY: 96W maximum
DO NOT dispose of electrical equipment with standard domestic waste. Contact your
local authority for disposal information specific to your area.
ONLY OPERATE ON A 12V SYSTEM. The unit will be irrepairably damaged if operated
at other voltage.
DO NOT adjust the Power Controller while operating a motorcycle, or any other type of
vehicle or machinery.
DO NOT allow the unit to be submerged in water.
DO NOT modify or disassemble any part of the system in any way.
DO NOT use if the product is visably damaged, or feels hot to the touch.
This Keis BLUETOOTH Power Controller is suitable for all Keis Heated Jackets,
Bodywarmers, and Vests, and other Keis heated garments that do not feature a built-in
power controller.
Do not connect this Power Controller in series to a Keis garment that already has a
built-in power controller (like the Keis heated motorcycle gloves), as they will cancel
each other.
Always connect this BLUETOOTH Power Controller to the provided connectors in the
Controller Pocket of the Keis garment you wish to control, and not in between a Keis
heated garment and a power source (a portable battery or vehicle power lead). This
allows for other garments (like gloves) to be connected to a Keis Jacket, Bodywarmer or
Vest without the BLUETHOOTH Power Controller conflicting with the glove’s built-in
controller.

USING THE POWER CONTROLLER
Locate the Controller Pocket on your Keis heated garment.
This is the vertical zipped pocket on the outside of the left front panel, near the waist, of your
Keis Heated Jacket, Keis Heated Bodywarmer, or Keis Heated Vest.
Pull this cable evenly to disconnect the Loop Connector from both its male and female plug
connections. Store the disconnected Loop Connector cable carefully, as it will be required for
the heated garment to work if you decided to no longer use the Power Controller.
Connect the Power Controller to both the male and female connections within the Controller
pocket.
POWER CONTROL WITHOUT USING THE KEIS iCONTROL APP
This BLUETOOTH Power Controller can also be used as a STANDARD Power Controller
when operated without using the Keis iControl application. These are the instructions when
using this controller without connecting to the Keis iControl application.
When the Power Controller is connected to a powered garment for the first time, all the LEDs
on the controller will flash for two seconds.
To SWITCH ON:
Press and hold down the button for one second to switch the controller on. The controller
will default to the highest setting (shown by a red LED).
Press the button again to scroll through the settings - medium (amber), low (green), and
back to high (red).
To SWITCH OFF:
Press and hold the button for at least two seconds to switch off.
POWER CONTROL USING THE KEIS iCONTROL APP
Download the free Keis iControl application on the Google Play store or Apple App Store.
When the Power Controller is connected to a powered garment for the first time, all the LEDs
on the controller will flash for two seconds.
To SWITCH ON:
Press and hold down the button for one second to switch the controller on. The controller
will default to the highest setting (shown by a red LED).
Open the Keis iControl
App, and press ‘Allow’
on the pop-up to allow
the App to ‘Allow Keis
iControl to access this
device’s location?’
Press ‘Add’ to add a
BLUETOOTH Power
Controller to the Keis
iControl application.
A loading screen will
appear while scanning.
Make sure that your
BLUETOOTH Power
Controller is plugged
into your garment and
switched on.
Once the BLUETOOTH
Power Controller has
been detected, a ‘Press
the button on the Keis
Controller’ status will
appear. Press the
button on the Keis
BLUETOOTH Power
Controller to confirm
this is the device you
wish to connect to.
You will be asked to
name the device button.
Name your device
controller buttons when
using different Keis
garments, with each
button connected to a
different BLUETOOTH
Power Controller.
Press the device button
to cycle through three
Power settings:
Green = Low Power
Amber = Medium Power
Red = High Power.
To SWITCH OFF:
To switch the BLUETOOTH Power Controller off, press and hold the button on the
BLUETOOTH Power Controller for at least two seconds.
1 2
3 4
5