Keji S201 User manual

Model:S201
PAPER SHREDDER
Instruction Manual
Please read the following instructions carefully before using,
and keep it for future use.
IMPORTANT SAFETY WARNINGS
When using the electrical appliances, basic safety precautions should always be
observed including the following :
-
- To protect against electric shock, do not immerse the machine in water or any other liquid.
- Do not operate the appliance with a damaged cord or plug or after the appliance malfunctions, or has
been damaged in any manner. Return the appliance to the nearest authorized service centre.
- Remove any pins or paper clips from paper before shredding.
- Do not shred film, label paper, clothing or plastic.
- Not intended for use by children.
- Always operate shredder on a flat surface.
- A full waste bin may lead to a paper jam, empty waste bin before it is full.
- Retain this instruction manual for further reference.
Read all the instructions carefully before using.
Keep children away from the
machine. This machine should be
operated by adults only.
Never insert fingers into opening. Please keep soft cloths, ties far
away from the paper entry.
Please keep your hair far away
from the shredder
Please do not spray onto or shred
near any flammable materials as
it may cause a fire. shred in a well
ventilated area.
WARNING
Operation，maintenance，and
service requirements are covered
in the instruction manual.Read the
entire instruction manual before
operating shredders.
Safety First
Please do not shred carbon paper,
thermal paper, wet paper,
adhesive paper, newspaper,film,
clothing or plastic as it may cause
machine failure.

KNOW YOURAPPLIANCE
USING YOUR SHREDDER
S E T T ING U P T HE S HR E DDE R
1.Remove the shredder from its carton and unwind the cord to its full length.
2.Place the waste bin on a firm level surface in a stable upright position.
3.Take the main shredder unit and put it onto the waste bin
4.Make sure the function switch is in the “OFF”position
5.Connect the plug to the V AC mains.
AUTO MODE
1.To use this mode, turn the function switch to“AUTO”.
2.Feed the paper into the paper throat, the shredder will operate to shred the paper.
3.Once all the papers have been shredded, it will stop itself.
OF F M ODE
To switch the shredder off, turn the function switch to the “OFF”position.
R E V E R S E M ODE
1.To switch the shredder to this mode, switch the function switch to “REV”position.
2.The cutting blade in the shredder will run in the reverse direction.
.
220-240
MOTO R O VE R HE AT S AF E TY D E VIC E
Your shredder is fitted with a safety device that switches off in the unit in event of an
overload. During an overload situation, the unit will stop automatically, and the overheat
protection indicator will light up. Turn the unit off and unplug from the mains. Allow the
motor to cool down to room temperature before resuming operation. If the unit fails to
operate or the safety device switches the unit off again, return the unit.
CLEANING
The paper shredder requires regular cleaning.
1.Before cleaning ensure power is switched off at mains and plug has been removed.
2.Clean the outer surface with a soft damp cloth only.
3.Ensure the unit is dry before connect to the mains.
PRODUCT SPECIFICATION
S201
DIS POS E O F WA S TE
1. Ensure power is off at mains.
2. Dispose of shredder waste.
3. Re-assemble shredder correctly before shredding.
PAP E R J A M
1.Turn the function switch to“REV”position to let the cutting blade run in the
reverse direction. The paper will reverse out from the throat.
2.Pull out the paper carefully to clear the throat.
3.Once the jammed paper is removed, turn the function switch to“AUTO”position
for normal operation.
7mm
S201
315x148x228mm
1.215kg
217mm
2 min ON 45min OFF
7 Litre
5sheets
73 dB around
220-240V~ 50/60HZ
0.5A
Paper entry width:
Net weight:
Dimension:
Model:
Duty cycle:
Waste bin volume:
Shred paper capacity:
Shred size:
Noise level:
Voltage:
Current: