Pla e your 5/64 (1.98MM) Allen wren h
in the Allen set s rew lo ated on the right
side of the mi ros ope. Figure (1)
Loosen s rew arefully remove the existing
head. Figure (2)
Lo ate your new repla ement head. Be
sure to remove plasti ap lo ated on the
base of the head.
Figure (3)
Carefully pla e the repla ement head in
the avity, align and tighten allen set
s rew.
Figure (4)
Figure 1
Figure 4
Figure 3
Figure 2
www.ken-a-vision. om
INS-SCHEAD
