Kenmore 152.23151910 User manual

Use & Care Guide
Manual de Uso y Cuidado
4 Burner LP Gas Grill
with Side Cart
Parrilla a gas LP con 4
quemadores y carro lateral
Model/Modelo: 152.23151910
Sears Brands Management Corporation
Homan Estates, IL 60179 U.S.A.
www.kenmore.com
Kenmore
®
Customer Care Hotline
To schedule in-home repair service
or order replacement parts
Para pedir servicio de reparación
a domicilio, y ordenar piezas
1-844-553-6667
www. kenmore. com
®

These instructions are for your safety. Read them thoroughly before use
and retain them for future reference.
WARNING:
Do not store or use gasoline or other
ammable vapors and liquids in the
vicinity of this or any other appliance.
An LP-cylinder not connected for use
shall not be stored in the vicinity of
any other appliance.
WARNING:
For Outdoor Use Only!
WARNING:
Improper installation, adjustment,
alteration, service or maintenance can
cause injury or property damage.
Read the installation, operating and
maintenance instructions thoroughly
before installing or servicing this
equipment.
3
Table of Contents
Parts Supplied 4
Hardware and Before You Start 5
Diagram and Part List 6
Assembly Steps 7
Leak Testing 23
Safety Instructions 24
User Instructions 25
Care and Maintenance 26
Grill Specications and Troubleshooting 29
Warranty 30
Service Number Back Cover
DANGER:
If you smell gas:
1. Shut o gas to the appliance.
2. Extinguish any open ame.
3. Open lid.
4. If odor continues, keep away from
the appliance and immediately call
your gas supplier or re department.

4
Ref Description Illustration Qty Ref Description Illustration Qty
Parts Supplied
10
11
12
13
14
15
16
17
18
19
20
1
4
3
1
1
1
1
1
2
1
2
Fold-down
Side Shelf
Vaporising
Bar
Cooking
Grate
Searing
Grate
Warming
Rack
Grease
Tray
Grease Cup
Bracket
Grease
Cup
Cart Wheel
Bracket
Left Cart
Frame
Cart
Wheel
1
2
3
4
5
6
7
8
9
Cabinet Base
Left + Right
Side Wall
Cabinet
Brace Plate
Cabinet
Front Panel
Cross Bar
Axle
Assembly
Locking
Caster
Wheel
Cylinder
Supports
Firebox
1
1
2
1
1
1
2
1
1

5
Ref Description Illustration Qty
Parts Supplied
21
22
23
24
25
26
27
Right Cart
Frame
Cart Shelf
Cart Rail
Side Cart
Handle
Side Cart
Tabletop
Utility Bin
Chopping
Board
1
2
2
1
1
1
1
Hardware Supplied
Ref Description Illustration Qty
A
B
C
Hardware items are not shown at actual
size.
Before You Start
Check the contents of the box and make sure
you have all the parts and ttings listed. If not,
call 1-844-553-6667.
When you are ready to start, make sure that you
have the right tools at hand, plenty of space and
a clean dry area for assembly.
Assembly
Lay out all nuts and bolts and check lengths
before assembly. It is recommended that the
carton is cut open and spread out on the
oor and used as a protective surface during
assembly. Refer to the assembly diagrams as
necessary.
CAUTION: While every precaution has been
made in the manufacture of this product, care
must be taken during assembly in case sharp
edges are present.
M6 x 12
Bolt
M4 x 10
Bolt
M6 x 45
Bolt
74
4
8

Diagram
6
Part List
Key Description Qty Part Number
Lid
Temperature Gauge
Logo
Lid Handle Bezel
Lid Handle
Firebox
Rotate Rod
Left Back Side Shelf Bracket
Left Front Side Shelf Bracket
Right Back Side Bracket
Right Front Side Bracket
Bottle Opener
Bezel Control Dial
A01
A02
A03
A04
A05
A06
A07
A08
A09
A10
A11
A12
A13
1
1
1
2
1
1
2
1
1
1
1
1
4
Key Description Qty Part Number
Control Dial
Grease Tray
Grease Cup Bracket
Grease Cup
Warming Rack
Cooking Grate
Searing Grate
Vaporising Bar
Burner
Gas Valve
Manifold
Gas Hose
Regulator
A14
A15
A16
A17
A18
A19
A20
A21
A22
A23
A24
A25
A26
4
1
1
1
1
3
1
4
4
4
1
1
1
506 A01
506 A02
506 A03
506 A04
506 A05
506 A06
506 A07
506 A08
506 A09
506 A10
506 A11
506 A12
506 A13
506 A14
506 A15
506 A16
506 A17
506 A18
506 A19
506 A20
506 A21
506 A22
506 A23
506 A24
506 A25
506 A26
A01
A02
A03
A04
A05
A06
A07
A08
A09
A12
A13
A14
A15
A16
A17
A10
A11
A18
A19
A20
A21
A22
A23
A24
A25
A26

Assembly Step 1
7
Fit left and right side walls to the cabinet base as shown below using 8 of the M6 x 12 bolts.
Note: The right side wall has a hole in the top corner.
This is a view from the back.
Cabinet Base M6 x 12 Bolt
Left + Right Side Wall
Right Side Wall Left Side Wall
M6 x 12 Bolt

Assembly Step 2
8
Fit the two cabinet brace plates to the cabinet base and side wall assembly using 8 of the M6 x 12 bolts as
shown below.
Cabinet Brace Plate (x2)
M6 x 12 Bolt
Cabinet Brace Plate
M6 x 12 Bolt

Assembly Step 3
9
Note: Flip cabinet assembly over so that the left side wall is on the oor.
Fit cabinet front panel to base and side wall assembly as shown below using 6 of the M6 x 12 bolts.
Note: An extra person will be needed to hold the door in position while tightening the bolts.
Cabinet Front Panel
Cabinet Front Panel
M6 x 12 Bolt

Assembly Step 4
10
Fit the cross bar using 4 of the M4x10 bolts.
Secure chain to cabinet front panel using the pre-tted M6 x 12 bolt and washer.
M4 x 10 Bolts
Cross Bar
Cross Bar

Assembly Step 5
11
Turn the cabinet assembly over and t axle assembly and two locking caster wheels to the underside of the
cabinet base using 16 of the M6 x 12 bolts.
Note: Axle side with cutout goes to back side of cart.
Note: Once grill is assembled and rolled into position, press caster levers down to lock casters in place.
Always detach side cart from grill when moving grill.
Axle Assembly Locking Caster
Wheel (x2)
Axle Assembly Locking Caster
Wheel
Cabinet Base
M6 x 12 Bolt

Assembly Step 6
12
Turn the cabinet assembly over and t the two cylinder supports to the cabinet base using 6 of the M6 x 12
bolts.
Cylinder Supports
Cylinder Support
M6 x 12 Bolt

Assembly Step 7
13
Firebox
Cut the zip ties securing regulator and hose to underside of rebox. Allow hose to hang straight down when
lowering rebox onto cart.
Position rebox onto cabinet. Open hood and use 4 of the M6 x 12 bolts to secure rebox into position. Be
sure that edges of rebox are even with edges of cart before tightening bolts.
Note: Attachment holes are located on inside of rebox (2 on each side).
Note: Two people are required to lift rebox into position.
M6 x 12 Bolt

R-clip and pin
Long bar
Assembly Step 8
14
Fold-down Side Shelf
Remove the pre-tted R-clips and pins from brackets on side of rebox.
Insert the shelf brackets into the rebox brackets and align the holes. Reinsert pins and clips through the
holes to secure the shelf in place.
To raise the shelf to use position, lift shelf up and hold it against side of rebox with one hand. Use other
hand to reach below shelf to lift up long bar and insert it into rebox bracket hooks. To fold shelf down,
reach below shelf to lift up long bar with one hand, and gently lower shelf with other hand.

Warming Rack
Assembly Step 9
15
1. Fit vaporising bars (x4) into position as shown.
2. Fit cooking grates (x3) and searing grate into position as shown.
3. Fit warming rack into position as shown.
Note: As a convenience feature, there is a bottle opener on the left side of the rebox.
1.
2.
3.
Vaporising Bar (x4) Cooking Grate (x3) Searing Grate Warming Rack
Note: The Searing Grate must be
positioned over the Searing Burner. For
searing purposes the Searing Burner
(14000 BTU) is hotter than the other
three burners (11700 BTU). The Searing
Grate design is also dierent than the
other three grates. Its diamond check
pattern will sear into the surface of the
meat.

Assembly Step 10
16
Attach grease cup bracket to grease tray using one of the M6 x 12 bolts and then slide tray into the back
of the grill as shown below. Open the front panel door and slide grease cup into the grease cup bracket as
shown.
Note: Access the grease cup to remove for cleaning by lowering the front panel door. Also, as a
convenience feature, there are three beverage container holder recesses on the inside of the door.
Grease Tray Grease Cup Bracket
Grease Tray
Grease Cup Bracket
Grease Cup
Grease Cup
M6 x 12 Bolt

Assembly Step 11
17
Cart Wheel (x2)Cart Wheel Bracket (x2) Left Cart Frame M6 x 12 Bolt
1. Fit cart wheel brackets to left cart frame as shown below using 8 of the M6 x 12 bolts.
2. Fit the 2 cart wheels to the cart wheel brackets using pretted bolt and washer attached to the tip of the
wheel axles.

Assembly Step 12
18
Lay the left cart frame down and attach the middle cart shelf rst using 2 of the M6 x 12 bolts. Then attach
the bottom cart shelf using 3 of the M6 x 12 bolts (Ref A). Then attach the right cart frame to the assembled
shelves using 5 of the M6 x 12 bolts (Ref A).
Note: There are 3 height options for the shelves.
Note: Bolt attachment points are located
underneath the cart shelves.
Right Cart Frame Cart Shelves (x2) M6 x 12 Bolt

Assembly Step 13
19
Fit the two cart rails to cart frame as shown using 8 of the M6x45 bolts.
Note: Be sure to attach the Cart Rails with the wide side facing up.
Cart Rail (x2)
Attach the side cart handle to the top of
the right cart frame with 2 M6 x 12 Bolts.
Side Cart Handle M6x45 Bolt M6 x 12 Bolt

Assembly Step 14
20
Attach the side cart tabletop to the cart frame using 5 of the M6 x 12 Bolts (Ref A).
Side Cart Tabletop Utility Bin Chopping Board
Place utility bin and chopping board into the side cart
tabletop as shown.
M6 x 12 Bolt (Ref A)