Kenmore 125.10341 User manual

Use & Care Guide
Manual de Uso y Cuidado
Kenmore+
@
® i_i 2
Mod® Mod®o 2f_ 'i@" '_s
Sears Brands Management Corporation
Hoffman Estates_ IL 60179 U,S,A,
www, kenmore,com

Before Using Your New Vacuum Cleaner ........................................................................ 2
Packing List ..................................................................................................................... 2
I(enmore Vacuum Cleaner Warranty ............................................................................... 3
important Safety instructions ........................................................................................ 4=5
Parts and Features ........................................................................................................... 6
Assembly instructions ................................................................................................... 7=8
Operating instructions ................................................................................................ 9=10
Vacuum Cleaner Maintenance and Care ..................................................................... 11=12
Troubleshooting .............................................................................................................. 13
Please read this guide. It will help you assemble and operate your new I<enmore vacuum cleaner in the
safest and most effectiveway.
Use the space below to record the model number of your new l<enmore vacuum cleaner.
Model No.
Date of Purchase
I<eep this book and your sales check (receipt) in asafe place for future reference.
Your KENMORE 18V Cordless 2-in-] Stick Vacuum is packaged with the following parts
and components included separately in the carton:
1 Handle 1Motorized Brush 1Charging Adapter
1Main Body 1Charger Base 1Combination Tool
1 Hand Vacuum 1Vacuum Support 1Manual
-2-

KENMORE LiMiTED WARRANTY
FOR ONE YEAR from the date of sale, this product iswarranted against defects in
material or workmanship when it is assembled, operated and maintained according to all
supplied instructions.
WiTH PROOF OF SALE, a defective appliance will be replaced free of charge.
For warranty coverage details to obtain free replacement, visit the web page:
www.kenmore.com/warranty
This warranty does not cover filters or belts, which are expendable parts that can wear
out from normal use within the warranty period.
This warranty is void if this product is ever used for other than private household purposes.
This warranty gives you specific legal rights, and you may also have other rights which
vary from state to state.
Sears Brands Management Corporation, Hoffman Estates, IL 60179
=3=

When using your Kenmore vacuum, basic precautions should always be followed,
including the following:
READ ALL iNSTRUCTiONS BEFORE USING THiS VACUUM CLEANER.
,WARNI NG:
To reduce the risk of fire, electric shock, or ir
*Do not use or charge outdoors or on
wet surfaces.
*Do not allow to be used as a toy. Close
attention is necessary when used by or
near children, pets or plants.
*Use only as described in this manual.
Use only manufacturer's recommended
attachments.
*Do not use with damaged cord or plug.
if appliance is not working as it should,
has been dropped, damaged, left
outdoors, or dropped into water, return
it to a service center,
*Do not pull or carry by cord, usecord
as a handle, close a door on cord,
or pull cord around sharp edges or
corners. Do not run the vacuum over
the charging adapter cord. Keep cord
away from heated surfaces.
*Do not unplug by pulling on cord. To
unplug, grasp the plug, not the cord.
*Do not handle charger, including
charger plug, and charger terminals
with wet hands.
*Do not put any object into openings. Do
not use with any opening blocked; keep
free of dust, lint, hair, and anything that
may reduce air flow.
*This vacuum cleaner creates suction and
has a revolving brush roll. Keep hair,
loose clothing, fingers, and all parts of
ury:
body away from openings and moving
parts.
®
®
Use extra care when cleaning on stairs.
Do not use to pick up flammable or
combustible liquids, such as gasoline, or
use in areas where they may be present.
Switch off the appliance before
connecting the accessories.
Do not pick up anything that is burning
or smoking, such as cigarettes, matches,
or hot ashes.
*Do not pick up toxic liquids such as
chorine bleach, ammonia or drain
cleaner.
®
®
Do not use without dust cup and filter in
place.
Do not charge the unit outdoors.
Do not attempt to use the charging
adapter with any other product nor
attempt to charge this product with
another charging adapter.
To recharge vacuum, use only the
charging adapter model 30004 listed
in the Replacement Parts table.
Do not incinerate the appliance even
if it is severely damaged. The batteries
inside this product may explode or leak
in a fire.
*Do not immerse vacuum or charging
-4-

adapter in water or other liquids.
*Always turn the vacuum off before
connecting or disconnecting the
motorized brush.
*Store the cordless vacuum indoors. Put
the cordless vacuum away after use to
prevent accidents.
*Use only manufacturer recommended
cleaning attachments.
*Keep your work area well lit.
*Keep the vacuum moving over the
carpet surface at all times to avoid
damaging the carpet fibers.
*Do not vacuum any liquids.
*Do not use in an enclosed space where
vapors are present from paint, paint
thinner, moth-proofing substances,
flammable dust or other explosive or
toxic materials.
*Do not pick up hard or sharp objects
such as glass, halts, screws or coins that
could damage the vacuum.
*To avoid excessive heat and damage
to unit or batteries, do not operate the
vacuum while charging.
*Do not use extension cords or outlets
with inadequate current carrying
capacity.
DO NOT MUTILATE OR INCINERATE
BATTERIESAS THEY WILL EXPLODE AT
HIGH TEMPERATURES.
Leaks from battery cells can occur
under extreme usage or temperature
conditions. If the liquid gets on skin,
wash quickly with water. If liquid gets
into the eyes, flush them immediately
with clean water for a minimum of 10
minutes. Seek medical attention.
While there is no shock hazard from
electrical terminals located on the
vacuum, a burn could result from metal
objects being inserted into the terminal
areas. Vacuum cleaner terminals should
always be kept free of objects.
Store charger indoors in a cool, dry
area, not exposed to weather to avoid
electrical shock and/or damage to the
vacuum cleaner.
Product Disposal
This product contains an internal Lithium-
ion battery pack formulated from
environmentally sensitive materials. This
product must be disposed of properly
with due care for the environment. Do
not dispose of product with household
garbage. Consult your local waste
authority for information regarding
available recycling or disposal options.
This device complies with part 15 of the FCC Rules. Operation issubject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
SAVE THESE iNSTRUCTiONS
Household use only.
=5=

It is important to know your 18V Cordless 2-in-1 Stick Vacuum's parts and features to
assure its proper and safe use. Review these before using your vacuum.
REPLACEMENT PARTS
Item Part No.
Filter 57004 _
Filter Basket 30003
Charging Adaptor 30004
Charger Base 30005
Vacuum Support 30006
Available online at
www.searspartsdJrect.com
or call 1-844-553-6667.
_Available online only at
www.sears.com.
JI .I Hand Vacuum
_n Body
J_Release Button
Charger Base
Combination Tool
Vacuurrl
Power Switch
Cup Release
Button
Cup
(Filter inside)
Charging _pter
_ort
-6-

Before assembling the vacuum, check the PACKING LIST (Page 2). Use this list to verify
that you have received all the components of your new Kenmore Cordless 2-in-1 Stick
Vacuum.
1. Fit the vacuum body into the motorized
brush powerhead and lock into place.
2. Insert the handle into the top of the main
body, as illustrated, and lock into place.
IIIII
3. Insert the hand
vacuum into the
main body as shown
and lock into place.
Ensure that the dust
cup is secure in
place.
4. Insert vacuum support 1_1_/))_
into charger base and
lock into place. //
5. The charging adapter plug will fit into
the charger base only one way. Insert the
charging adapter plug into the charging
port on the bottom of the charger base
and thread the cord out as illustrated.
IIII)
6. Plug the adapter into a wall outlet.
-7-

[
Before charging, make sure unit is OFF.
1. Plug the charging ! //! /
adapterintoan / tk\/ l
outlet. Insert the _ I/ _ 1
vacuumc eaneronto /// /1
the charger base as _ _ •
shown. __
2. Make sure the vacuum cleaner is fully
charged before using for the first time. The
vacuum may take up to 5 hours to charge
completely if fully discharged.
3. The battery charge
indicator will flash
continuously until vacuum
is fully charged.
Battery Charge Indicator:
25% 50% 75%
CHARGING
100%
4. When the vacuum has
reached full charge (100%),
the battery charge indicator
will remain lit with four
(4) bars illuminated for 3
seconds then go to dormant
mode with no illuminated
lights showing.
NOTE: if the battery charge indicator does
not illuminate when charging, ensure the
following:
• That the vacuum cleaner is seated
properly onto the charger base.
• That the charging adaptor is plugged into
the outlet properly.
• That the adaptor power plug is connected
properly on the charger base.
NOTE: For improved battery performance,
always keep the vacuum cleaner on the
charger base while not in use.
-8-

CAUTION
Moving parts! To reduce the risk of personal injury,
DO NOT touch the brush roll when vacuum is on.
Contacting the brush roll while it is rotating can cut,
or cause other injuries. Always turn off before servicing.
Use caution when operating near children.
USING YOUR VACUUM CLEANER
CONTROL PANEL
The control panel is located on the top of
the handle, which includes:
O Power Icon=On/Off
I Speed Indicator=Low/High
Battery Indicator
= Electric Capacity
WARNING
Do not operate vacuum cleaner without
filter in place.
Before vacuuming, check that the brush
wheels and brush roll are clear of any
sharp objects to avoid scratching floors.
Use low speed for surface cleaning of bare
floors or low pile rugs and carpets or when
increased runtime is needed.
Use high speed for cleaning of plush rugs
and carpets or when additional cleaning
power is required.
Vacuum Operation:
1. Touch the power icon to illuminate
control panel and initiate power.
IIIIII
NOTE: If no further action istaken in 5
seconds, panel returns to previous state.
2. Start the vacuum cleaner by touching
the power icon once more. The speed bars
will illuminate allowing for speed control.
IIIIII
-9-

3. To change power setting, touch the
speed indicator icon for desired power
setting (Low or High).
IIIII
Low Speed High Speed
NOTE: This vacuum cteaner is equipped
with amemory function that allows the
vacuum to start in the last power setting.
4. After vacuuming, turn the unit off by
touching the power icon for 2 seconds.
NOTE: Holding for lessthan 2 seconds
causes no action.
!
IIIIII >
NOTE: When the vacuum is low on battery
power, the control panel or the battery icon
will flash. The flashing will continue until
the unit is placed on the charging station
or is completely out of battery power.
CLEANING WiTH THE HAND VACUUM
/\
I
1. To remove the
hand vacuum, press
the release button
and detach the hand
vacuum from the
main body.
2. To turn on the hand vacuum, press the
power switch located on top of the handle.
NOTE: When battery power is low, the
battery charge indicator around the switch
will flash.
To charge, place the hand vacuum into the
main body and place the whole unit onto
the charger base.
Power
i//_ \\]
/_\ //
3. To clean difficult to reach areas, use
the combination tool by inserting end of
combination tool into the hand vacuum as
shown.
=10 =

CAUTION
To reduce the risk of shock, remove vacuum cleaner from the charger base. Turn off
before performing any service or maintenance.
EMPTYING THE DUST CUP AND CLEANING THE FILTER
For best performance, empty the dust cup
after every use. Never operate the vacuum
cleaner without the dust cup and filter in
place.
1. Make sure the vacuum is turned off.
Remove the hand vacuum from the main
body. .-.
To remove the hand
vacuum, press the release
button and detach the
hand vacuum from the
main body.
2. Press the dust cup release button and
separate the dust cup from the hand
vacuum body.
3. Remove the filter basket from the dust
cup. Empty the dust cup contents into a
waste receptacle.
The key to maximum performance is
having a clean filter. Cleaning the filter
after each use will help your vacuum
operate at peak efficiency.
Use only genuine I<enmore model number
57004 replacement filters in your I<enmore
vacuum. To purchase visit www.sears.com
or call 1-844-553-6667.
4. Remove the filter
from the filter basket.
With a soft brush, brush
accumulated debris from
the side screens of the
filter basket and from the
filter.
5. After much repeated use, it may be
necessary to wash the filter basket and
filter clean of accumulated dust. First brush
loose debris from both basket and filter
cloth, then hand wash basket and filter in
warm water. After washing, set both aside
and allow to air dry. IMPORTANT: The
basket and filter must be completely dry
before reuse.
I
I
I
I
6. Insert the clean, dry filter into the
basket, fit the basket into the dust cup,
and reconnect the dust cup to the hand
vacuum.
-11-

CLEANING THE MOTORIZED BRUSH AND BLOCKAGES
The brush roll may accumulate debris such as strings, hair and fibers. This type of debris
can wrap around the brush and diminish its ability to clean effectively. The Easy-Cut blade
in the Powerhead housing will automatically cut most debris accumulation away from the
brush roll.
Recommended: After every use, clean
the brush rol! with the Easy-Cut system by
stepping on the button as illustrated while
the brush roll is spinning.
\
To Remove Brush Roll For Manual Cleaning:
1. Ensure the vacuum is OFF:.
2. Turn unit over to
access the brush roll.
3. Unlock the
brush roll tab
with flat head
screwdriver
or similar tool
as illustrated.
4. Lift the
brush roll out
of the housing.
Clean off debris
and anything
wrapped around
the brush.
5. Place the
brush rol! into
the housing by
aligning the end
to the brush drive
first, then inserting
the other end correctly
into place. When installed
correctly, the brush roll should
spin freely.
6. Lock the brush in
place by closing the
tab as illustrated.
To Remove Hose
Blockages:
1. To clean out the
hose, press the
hose release tabs,
as illustrated, and
pull the motorized
brush powerhead
away from the main
vacuum body.
2. Carefully remove any
debris or blockage from
the inside of the hose.
Reattach the motorized
brush powerhead onto
the vacuum body.
NOTE: Do not use scissors or other sharp
objects to remove a blockage from the
hose as these may damage the hose.
WARN iNG
This product contains the EASY=CUT blade.
Do not touch the blade when performing
motorized brush maintenance.
EASY=CUTBLADE
=12 =

Review the table for solutions to minor performance problems. Any service neededn other
than maintenance described in this Use 8, Care Ouide_ should be performed by a Sears or
other qualified service agent.
IIbWARNING
Disconnect electrical supply before performing maintenance to the vacuum cleaner.
Failure to do so could result in electrical shock or personal injury.
I P"o"LEMII
Vacuum will not i].
turn on. i2.
i3.
Battery charge i 1.
indicator does not
illumlnate, i2.
i3.
i4.
Motorized brush i].
not turning. 2.
i3.
Vacuum not picking l].
up or suction i2.
power is weak. i3.
i4.
i5.
Dust escapes from i].
Vacuum. i2.
i3.
i].
POSSIBLE CAUSE I
Battery may be depleted.
Wrong charger being used.
Hand vacuum is not installed
properly.
Battery may be depleted.
Charging adapter isnot
plugged in.
Debris accumulated on the
metal charge contacts on the
hand vacuum, main body and
charging adapter.
The electrical outlet is out of
power.
Brush roll is jammed.
Brush roll needs to be reset.
Brush roll is not installed well.
Dust cup is full.
Filter needs cleaning.
Filter needs to be replaced.
Battery may be depleted.
Dust cup is not installed well.
Filter is missing or installed
incorrectly.
Filter is damaged and needs
to be replaced.
Dust cup installed incorrectly.
lSOLUTION 1
]. Charge the battery as instructed on
page 8.
2. Be sure to use only the charger supplied
with your product.
3. Remove hand vacuum and reattach
ensuring that it is securely in place.
1. Charge the battery as instructed on
page 8.
2. Besure the charging adapter is plugged
in properly to the outlet and to the
charging hole on the bottom of the
charging adapter.
3. Besure no debris is accumulated on
the metal charger contacts on the
hand vacuum, main body and charging
adapter.
4. Ensure that the outlet issupplying power
to the charger.
].
2.
3.
].
2.
3.
4.
5.
].
2.
3.
].
Remove obstruction. Follow instructions
on page ]2.
Turn the unit off and remove the
obstruction, then turn back on.
Remove brush roll and reinstall following
instructions on page ]2.
Empty dust cup.
Follow filter cleaning instructions on
page ]].
To purchase visit www.searspartsdirect.
corn or call 1-844-553-6667.
Charge the battery as instructed on
page 8.
Check dust cup for correct installation
and ensure it is snapped firmly in place.
Check filter for correct installation.
To purchase visit www.searspartsdirect.
corn or call 1-844-553-6667.
Position dust cup correctly and snap
firmly into place.
Vacuum turns off Battery may be depleted. Charge the battery as instructed on
on its on. page 8.
=13=

Antes de utilizar su nueva aspiradora .............................................................................. 2
Lista de empaque ............................................................................................................ 2
Garantia de la aspiradora Kenmore ................................................................................ 3
Importantes instruccienes de seguridad ........................................................................ 4-5
Piezas V caracteristicas .................................................................................................... 6
Instrucciones de montaje .............................................................................................. 7-8
Instrucciones de use ................................................................................................... 9-10
Mantenirniento y cuidada de la aspiradora ................................................................. 11-12
Resoluci6n de problemas ................................................................................................ 13
Lea esta guia. Lo ayudar6 a ensamblar y utilizar su nueva aspiradora I<enmore de la manera m6s
segura y efectiva posible.
Utilice el siguiente espacio para anotar el nOmero de modelo de su nueva aspiradora I<enmore.
N ° de modelo
Fecha de compra
Mantenga este libro y su recibo de compra en un lugar seguro para utilizarlo como referencia a futuro.
Su aspiradora de varilla KENMORE 2 en 1de 18 volts posee las siguientes piezas y
componentes incluidos pot separado en la caja:
1Manija 1Cepilio motorizado 1Cargador
1Cuerpo principal 1Base para el cargador 1Herramienta combinada
1Aspiradora de mano 1Soporte para la aspiradora 1Manual
-2-

GARANTiA LIMITADA KENMORE
DURANTE UN Ai_lO a contar de la fecha de venta_ este producto est6 garanfizado contra
defectos en susmateriales o fabricaci6n s61o si se Io ensambla, opera y mantiene seggn
las instrucciones incluidas.
CON UNA PRUEBA DE LA VENTA, un aparato defectuoso puede cambiarse sin costo
alguno.
Para obtener detailes sobre la cobertura de la garantfa y c6mo obtener un reemplazo
gratuito, visite ei sitio Web: www.kenmore.com/warranty
Esta garantfa no cubre los filtros ni las correas, ya que son piezas desechabies que
pueden desgastarse con ei uso normal dentro dei periodo de la garantfa.
Esta garantfa queda nuia si el producto se utiliza para prop6sitos no dom6sticos.
Esta garantfa le entrega derechos iegales especffJcos que pueden variar seggn su estado,
ya que podrfa tenet otros derechos adicionales.
Sears Brands Management Corporation, Hoffman Estates, IL 60179
-3-

AI utilizar su aspiradera Kenmore, se deben siempre seguir precauciones b_sicas,
incluyende las siguientes:
LEA TODAS LAS INSTRUCCIONES ANTES DE USAR ESTA ASPIRADORA.
ADVERTENCIA:
Para evitar el riesgo de incendio, descarga el_ctrica e lesienes:
*No ufitice este aparato ni Io cargue en
exteriores o superficies mojadas.
*No permita que se ufilice come un
juguete. Se debe prestar estricta
atenci6n cuando el aparato se use
cerca de ni5os, mascotas y plantas.
* Ufitice el producto solo come se
describe en este manual. Ufilice solo
los aditamentos recomendados per el
fabricante.
* No utilizar siel enchufe o cable est6n
da5ados. Si el aparato no funciona
come debiera o si se ha carrie, da_ado,
dejado en exteriores o sumergJdo bajo
el agua, ll_velo a un centre de servicio.
*No jale o transporte ufilizando el
cable come manija, no apriete el
cable al cerrar puertas ni Io jale cerca
de hordes afJtados o esquinas. No
utilice la aspiradora sobre el cable del
cargador. Mantenga el cable alejado
de superficies calientes.
* No desconecte jalando el cable. Para
desconectarlo tire del enchufe, no del
cable.
* No manipule el cargador, incluyendo el
enchufe yterminales del cargador con
las manes mojadas.
* No ponga objetos sobre las aberturas.
No utilizar si las aberturas est6n
bloqueadas, mant6ngalas libres de
polvo, cabe!ios, pelusas y cualquier
cosa que pueda reducir el flujo de aire.
* Estaaspiradora genera succi6nyposee
un cepiilo de rodillo revolvedor. AI
ufilizarlo, mantenga su cabello, ropas
holgadas, dedos ypartes de su cuerpo
lejos de las aberturas y piezas m6viles
del producto.
Tenga precauci6n adicional al limpiar
en escaleras.
*No utilizar para aspirar I{quidos
inflamables o combustibles, tales come
gasolina, ni tampoco utilizar en zonas
donde estos elementos puedan estar
presentes.
*Apague el aparato antes de conectar
los accesorios.
®
®
No aspire elementos en llamas ni
quem6ndose, tales come cigarrillos,
cerillos o cenizas calientes.
No aspire I{quidos t6xicos tales come
blanqueador en base a cloro, amoniaco
o quitamanchas.
No ufilizar sin el dep6sito para polvo y
filtro en su lugar.
No cargue la unidad en exteriores.
No intente ufilizar el cargador con otro
producto ni intente cargarlo con otro
cargador.
Para recargar la aspiradora, ufilice
solo el modelo de cargador 30004,
JndJcado en la tabta Piezas de repuesto.
No incinere el aparato incluso en case
de haberse da_ado de forma severa.
Las baterfas de este producto expuestas
a fuego pueden explotar o tenet fugas.
No sumerja la aspiradora ni el
-4-

cargador en agua u otros Ifquidos.
•Apague siempre la aspiradora antes
de conectar y desconectar el cepillo
motorizado.
•Almacene la aspiradora inal6mbrica
en interiores. Para evitar accidentes,
almacene la aspiradora Jnal6mbrica
despu_s de usarla.
*Utilice solo los aditamentos de limpieza
recomendados per el fabricante.
*Mantenga su zona de trabajo bien
iluminada.
*Mantenga la aspiradora movi_ndose
sobre la alfombra en todo memento
para asf no daSar las fibras de la
alfombra.
*No aspire Ifquidos.
*No utilice en un espacio confinado
deride haya vapores de pinturan de
dituyente de pinturan sustancias que
alejen polillas, pelves inflamabtes u
otros materiales t6xicos o explosives.
*No aspire objetos afilados ni duros_
tales come vidrionu5as, tornillos
omonedas que puedan da_ar la
aspiradora.
*Para evitar calor excesivo y da5os
a la unidad o baterfas, no utilice la
aspiradora mientras la est_ cargando.
*No utilice cables alargadores ni tomas
de corriente de capacidad inadecuada.
NO MUTILE NI INCENERE LAS
BATERJAS,YA QUE EXPLOTAN A ALTAS
TEMPERATURAS.
Las fugas de las baterfas pueden
ocurrir bajo condiciones de use extreme
o temperatura. Si el Ifquido cae sobre
la piel, lave r6pidamente con agua. Si
el Ifquido entra en los ojos, enju6guelos
Jnmediatamente con agua limpia
durante al menos 10 minutes. Consiga
atenci6n m_dica.
Si bien no existe riesgo de descarga
en las terminales el_ctricas de la
aspiradora, podrfa ocurrir una
quemadura provocada per objetos
met61icos Jnsertados en las terminales.
Las terminales de la aspiradora deben
mantenerse siempre libres de objetos.
AImacene el cargador en interiores, en
una zona seca y frescat sin exponerlo
al clima para asf evitar descargas
el_ctricas y da_os a la aspiradora.
Elirninaci6n del product
Este producto contiene un paquete
de baterfas de Jones de litio hecho
de materiales perjudiciales para el
medio ambiente. Este producto debe
ser eliminado de forma adecuada
para proteger el medio ambiente. No
deseche este producto junto a la basura
dom_stica. Consulte con su autoridad
local en materia de desechos para
conseguir informaci6n sobre las opciones
de eliminaci6n y reciclaje disponibles.
Estedispositivo cumple con la parte 15de las Regulaciones FCC. La operaci6n
queda sujeta alas siguientes dos condiciones: (1) este dispositivo no puede
prevocar interferencias peligrosas, y (2) este dispositive debe aceptar
cualquier interferencia recibida, incluyendo aquellas que puedan prevocar un
funcienamiento no deseade.
GUARDE ESTAS INSTRUCCIONES
Solo para uso dom_stico.
-5-

Esimport°rite que conozca las piezas ycaracterfsticas de su aspiradora de varilla 2 en
1Jnal6mbrica, par° garantizar su uso correcto yadecuado. Reviseantes de utilizar su
aspiradora.
PIEZAS DE REPUESTO
Elemento N° de pieza
Filtro 57004 _
Soporte par° el filtro 30003
Cargador 30004
Base ioara el care°dot 30005
Soporte ioara la °spit°dora 30006
Disponible en Ifnea en
www.sea rspar tsdirect.com
opor tel6fono al 1-844-553-6667.
_Disponible en Ifnea s61oen
WWW.Sea rs.com.
Bot6n de corte f6cil
Herromiento
combinodo
Bose pora
el cargodor
Bot6n de bloqueo
IB;to6pirdedlloberdci6hade
de
encendldo de Io
ospirodoro de mono
de liberoci6n del
dep6sito poro polvo
p6slto pora polvo
(filtroen elinterior)
Corgodor
Soporte par°
Io osplrodoro
-6-

Antes de armar la aspiradora, compruebe la LISTA DE EMPAQUE (p6gina 2). Utilice
esta lista para verificar que ha recibido todos los componentes de su nueva aspiradora
Kenrnore.
1. Conecte el cuerpo de la aspiradora con
el cabezal de cepillo motorizado y ffjelo.
2. Inserte la manija en la parte superior del
cuerpo, como se indica en la ilustraci6n, y
fijela.
IIIII
3. Inserte la
aspiradora de
mano en el cuerpo
principal, como
se indJca en la
Jlustraci6n, y fijela.
Aseggrese de que el
dep6sito de polvo
est6 asegurado en su
lugar.
4. Inserte el soporte de _
la aspiradora en la base )L7// |
de, cargador y fije,o. _ _.
5. El enchufe del cargador entrar6 en la
base del cargador solo de una manera.
Inserte el enchufe del cargador en el
orificio de carga de la parte inferior de la
base y extraiga el cable como se indica.
IIII)
6. Conecte el cargador a una toma de
corriente.
-7-

[
ADVERTENCIA
Antes de cargar, aseg_rese de que la
uniclact est_ apagada.
1. Enchufe el cargador ! II! /
en una toma de / _\/ J
corriente.Insertela / l/'I 1
aspiradora en la base ! i/ _ J
de carga, coma se _ _ J
mdlca
2. Aseggrese de que la aspiradora est6
completamente limpia antes de usarla
par primera vez. Si est6 completamente
descargada, la aspiradora puede demorar
hasta 5 horas en cargarse par completo.
3. El indicador de carga
de la baterfa parpadear6
confinuamente hasta
que la aspiradora est_
completamente cargada.
Indicador de carga de la bater[a:
25% 50% 75% 100%
CARGA
4. Cuando la aspiradora
alcance la carga completa
(100°/0), el indJcador
de carga permanecer6
encendido con las cuatro (4)
barras encendidas durante
3 segundos y luego entrar6
en modo de inactividad
para apagarse.
NOTA: Si el indicador de carga no se
ilumina durante la carga, verifique Io
siguiente:
• Que la aspiradora est_ asentada
correctamente en la base del cargador.
• Que el cargador est_ enchufado a la
toma de corriente de manera correcta.
* Que el enchufe del cargador est_
conectado correctamente a la base del
cargador.
NOTA: Para mejorar el desempe_o de la
bateria, mantenga siempre la aspiradora
sabre la base del cargador cuando no la
est_ usando.
=8=