Kenmore 592.30414 User manual

ENGLISH FRANÇAIS
Use & Care Guide
Manuel Du Propriétaire
Vacuum Cleaner
Aspirateur
Model, Modèle
592. 30414 (CANADA)
CAUTION:
Read and follow all
safety and operating
instructions before rst
use of this product.
ATTENTION :
Veuillez lire toutes les
consignes de sécurité et le
mode d’emploi avant d’utiliser
ce produit.
Printed in Korea
Imprimé en Korea
Sears Canada Inc., Toronto, Ontario, Canada M5B 2B8
www.sears.ca

2
TABLE OF CONTENTS
BEFORE USING YOUR NEW VACUUM CLEANER
Please read this guide. It will help you assemble and operate your new Kenmore
vacuum cleaner in the safest and most effective way.
For more information about vacuum cleaner care and operation, call your
nearest Sears store. You will need the complete model and serial numbers when
requesting information.
Your vacuum cleaner’s model and serial numbers are located on the Model and
Serial Number Plate.
Use the space below to record the model number and serial number of your new
Kenmore vacuum cleaner.
Model No. ____________________________________________
Serial No. ____________________________________________
Date of Purchase ______________________________________
Keep this book and your sales check (receipt) in a safe place for future reference.
Before Using Your New Vacuum
Cleaner............................................2
Kenmore Vacuum
Cleaner Warranty ...........................3
Important Safety
Instructions................................. 4-5
Parts and Features.........................6
Assembly Instructions............... 7-8
Operating Instructions............. 8-10
Power Cord ..................................8
Switch Operation...........................9
Floor/ Carpet Cleaning ............ 9-10
Above Floor Cleaning..................11
Vacuum Cleaner Care .............11-17
Vacuum Cleaner Storage ............11
Dust Bin Removal and Replacement 12
Motor Filter Maintenance ............13
Exhaust Filter Maintenance.........14
Light Bulb Replacement ..............14
Belt or Brushroll Removal and
Replacement ...............................15
Suction Diverter Maintenance .....16
Pet Handimate Maintenance.......17
Troubleshooting...........................18
Master Protection Agreements ...19
Requesting Service..... (back page)

3
ENGLISH
KENMORE VACUUM CLEANER WARRANTY
3
ONE YEAR LIMITED WARRANTY ON KENMORE VACUUM CLEANER
When installed, operated and maintained according to all instructions supplied
with the product, if this appliance fails due to a defect in material and workmanship
within one year from the date of purchase, return it to any Sears store, Sears
Parts & Repair Service Center for free repair. Appliance must be used for private
family purposes, or warranty is void.
This warranty covers only defects in material and workmanship.
Sears will NOT pay for:
1. Expendable items that can wear out from normal use, including but not
limited to lters, belts, light bulbs, and bags.
2. A service technician to instruct the user in correct product installation,
operation or maintenance.
3. A service technician to clean or maintain this product.
4. Damage to or failure of this product if it is not installed, operated or
maintained according to the all instructions supplied with the product.
5. Damage to or failure of this product resulting from accident, abuse, misuse
or use for other than its intended purpose.
6. Damage to or failure of this product caused by the use of detergents,
cleaners, chemicals or utensils other than those recommended in all
instructions supplied with the product.
7. Damage to or failure of parts or systems resulting from unauthorized
modications made to this product.
Disclaimer of implied warranties; limitation of remedies
Customer’s sole and exclusive remedy under this limited warranty shall be
product repair as provided herein. Implied warranties, including warranties of
merchantability or tness for a particular purpose, are limited to one year or
the shortest period allowed by law. Sears shall not be liable for incidental or
consequential damages. Some states and provinces do not allow the exclusion or
limitation of incidental or consequential damages, or limitation on the duration of
implied warranties of merchantability or tness, so these exclusions or limitations
may not apply to you.
This warranty applies only while this appliance is used in Canada.
This warranty gives you specic legal rights, and you may also have other rights
which vary from state to state.
Sears Canada Inc., Toronto, Ontario, Canada M5B 2B8

4
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS IN
THIS MANUAL BEFORE
ASSEMBLING OR USING YOUR
VACUUM CLEANER.
Do not use outdoors or on wet
surfaces. Electrical shock could
occur.
Do not allow to be used as a toy.
Close attention is necessary when
used by or near children.
Use only as described in this manual.
Only use attachments designed for
this vacuum.
Do not use with damaged cord or
plug. If appliance is not working as
it should, has been dropped,
damaged, left outdoors, or dropped
into water, return it to a Sears or other
qualied service center for inspection.
Do not pull or carry by cord, use cord
as handle, close a door on a cord,
or pull cord around sharp edges or
corners. Do not run appliance over
cord. Keep cord away from heated
surfaces.
Do not unplug by pulling on cord.
To unplug, grasp the plug, not the
cord.
Do not leave appliance when
plugged in. Unplug from outlet when
not in use and before servicing.
Do not handle plug or
appliance with wet hands.
Do not put any objects into openings.
Do not use with any opening blocked;
keep free of dust, lint, hair, and
anything that may reduce air ow.
Keep hair, loose clothing, ngers, and
all parts of body away from openings
and moving parts.
Do not pick up anything that
is burning or smoking, such as
cigarettes, matches, or hot ashes.
Do not use without Dust Bin and
lters in place.
Turn off all controls before
unplugging.
Do not use to pick-up ammable or
combustible liquids, such as gasoline,
or use in areas where they may be
present.
Keep the vacuum cleaner on the
oor. Do not use on stairs.
Do not use an extension cord with
this vacuum cleaner.
Store the vacuum cleaner indoors.
Put vacuum cleaner away after use
to prevent tripping accidents.
WARNING
Your safety is important to us. To reduce the risk of
re, electrical shock, injury to persons or damage
when using your vacuum cleaner, follow basic safety
precautions including the following:

5
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
Your cleaner contains a thermal protective device to shut off the motor to
avoid overheating. If this happens, turn switch off and unplug the cleaner.
Inspect the exhaust, inlet, and lters for any blockage. Empty the dust bin
and clean lters. After approximately 1 hour the motor will be cooled and the
vacuum will be ready to use.
Note :
The cleaner must remain at least 1 hour for cooling.
CAUTION : Even though the main motor is shutted off, the power nozzle
brushroll could not stop. Turn off the power nozzle brushroll switch
before inspect the cleaner. After approximately 1 hour the motor will
be cooled and the vacuum will be ready to use.
Note : The cleaner must remain unplugged at least 1 hour for cooling.
WARNING : The cords, wires, and/
or cables supplied with this product
contains chemicals, including
lead or lead compounds, known
to the state of California to cause
cancer and birth defects or other
reproductive harm. Wash hands
after using.
Using improper voltage may result
in damage to the motor and
possible injury to the user. Proper
voltage is listed on the cleaner
plate.
SAVE THESE INSTRUCTIONS
Proper assembly and safe use of your vacuum cleaner are your
responsibilities. Your vacuum cleaner is intended only for Household
use. Read this Use & Care Guide carefully for important use and safety
information. This guide contains safety statements under warning and
caution symbols. Please pay special attention to these boxes and follow any
instructions given.

6
PARTS AND FEATURES
It is important to know your vacuum cleaner’s parts and features
to assure its proper and safe use. Review these before using your
vacuum cleaner.
Item
HEPA Filter DJ97-00984D
Headlight DJ47-00004A
Part No.
BACKFRONT
Crevice Tool Pet
Handimate
Dust Brush/
Upholstery Tool
Accessories
Suction
Diverter
Cord Clip
Hose
Extension
Wand
Hose
Guide
Handle
Release Pedal
Dust Bin
Height
Adjustment
Knob
Power
Nozzle
Headlight
Furniture
Guard
Pet Handimate
Holder
Crevice
Tool Holder
Dust Brush/
Upholstery
Tool Holder
Cyclone Cap
Quick Release
Upper Cord
Wrap
Lower Cord
Wrap
Carry Handle
(Dust Bin Handle)
Handle

7
ENGLISH
Please pay special attention to these hazard alert boxes, and follow any
instructions given. WARNING statements alert you to such dangers as re,
electric shock, burns and personal injury. CAUTION statements alert you to
such dangerous personal injury and/or property damage.
ASSEMBLY INSTRUCTIONS
WARNING
Electrical Shock Hazard
Do not plug into the electrical
supply until the assembly is
complete. Failure to do so could
result in electrical shock or injury.
CAUTION
Do not overtighten.
Overtightening could strip the
screw holes.
Do not operate the vacuum cleaner
without the screws in place.
5. Slide slot in hose end over tab on
control tube. Turn hose to right to
secure tab in slot.
3. Slide fully retracted hose into the
handle until you hear a click.
2. Slide fully retracted wand and handle
into the slot on body until you hear a
click.
HANDLE ASSEMBLY
1. Slide fully retracted extension wand
into the handle until you hear a click.
4. Extend the hose and x into the two
hose guides down the back of the
vacuum cleaner.

8
ASSEMBLY INSTRUCTIONS
TOOL PLACEMENT
Place Pet Handimate (A) into the
tool holder on side of the body. Place
dust brush/upholstery tool (B) into its
accessory holder on side of the body.
Place crevice tool (C) into its accessory
holder on side of the body.
C
B
A
2. Unclip the power cord plug from the
power cord. Place the power cord into
the cord clip on the body as shown.
This helps keep the power cord
out from under the vacuum cleaner
nozzle.
3. Plug the polarized power cord into a
120 Volt outlet located near the oor.
4. To store cord, turn upper cord hook to
the up position, then wrap cord.
1. Turn the quick release upper cord
wrap to either side and down to
release the power cord.
POWER CORD
OPERATING INSTRUCTIONS
WARNING
To reduce the risk of electric shock,
this appliance has a polarized
plug (one blade is wider than
the other). This plug will t in a
polarized outlet only one way. If the
plug does not t fully in the outlet,
reverse the plug. If it still does not
t, contact a qualied electrician
to install the proper outlet. Do not
change the plug in any way.
WARNING
Personal Injury and Product
Damage Hazard
• DO NOT plug in if switch is in the
ON position. Personal injury or
damage could result.
• DO NOT use outlets above
counters. Damage from cord to
items in surrounding area could
occur.

9
ENGLISH
SWITCH OPERATION
Power and Brush Roll
The Power on/off button is located on
the top of vacuum body.
Turn on vacuum by power button after
plugging cord into electrical outlet.
The Brush Roll On/Off button turns the
rotating brush roll on and off.
Turn brush roll on to clean carpet and
rugs.
Turn brush roll off to clean hard surface
oors.
The brush roll will automatically turn
off when the handle is in the upright
position.
Note : For optimal cleaning
performance, adjust to the lowest
practical setting. If your cleaner is
difcult to push, adjust to the next
higher setting.
Power
On/Off
Dust Bin
Release Wand
Release
Brush Roll
On/Off
Circuit breaker
(Reset switch)
The circuit breaker turns off the brush-
roll if its motion becomes obstructed.
The brushroll will stop, but the suction
motor will continue to run.
To reset the breaker, turn cleaner off
and unplug it. Clear the obstruction from
brushroll area.
Use pen tip to press down reset switch.
Turn cleaner on and continue cleaning.
FLOOR/CARPET CLEANING
HEIGHT ADJUST KNOB
1. Place handle in upright position
2. Turn height adjustment knob to
desired setting
Lowest setting – For bare oors
4-step carpet setting – For various
carpet heights
Low carpet setting
– For short pile carpets
Intermediate carpet settings
– For medium pile carpets
High carpet setting
– For plush pile carpets

10
FLOOR/CARPET CLEANING
HANDLE RELEASE
To release handle, push the handle
release pedal located on the lower left
side of the cleaner.
CLEANING TOOLS
Attachment tools can be used to clean
furniture, drapes, stairs, or in corners.
Place the vacuum on the oor with
handle in the upright position while
using attachment tools.
EXTENSION WAND
Adjust the length of the extension wand
by sliding the length control button
located in the center of the extension
wand back and forth.
NOTE : When vacuum is running,
raising handle to upright
position will stop brushroll.
Lowering handle will resume
brushroll operation.
Rotate the handle and adjust it to the
desired position for (A) storing the
upright, (B) operating the cleaner, and
(C) to clean under furniture.
A
B
C
CAUTION
Rotating brushroll could cause area
rug fringe to become tangled with
cleaner. Use care when vacuuming
any rugs with fringe.

11
ENGLISH
ABOVE FLOOR CLEANING
Simply push the attachment rmly onto
the end of the wand or hose handle. To
remove tool, twist and pull apart gently.
CAUTION
Always keep hair, loose clothing,
ngers, and all parts of body away
from brush roll area while cleaner is on.
Gather the cord and wrap it loosely
around the upper and lower cord wraps.
Lock power cord plug onto the power
cord. Store the vacuum cleaner in a dry,
indoor area, on the oor with the handle
locked in the upright and position.
VACUUM CLEANER STORAGE
VACUUM CLEANER CARE
WARNING
Electrical Shock and Personal Injury
Hazard Wrapping the cord too tightly
puts stress on the cord and can
cause cord damage.
To detach wand assembly:
1. Place handle in fully upright position.
2. Hold down wand release button with
one hand.
3. Push down on handle with other
hand. Listen for click. Pull handle up.
To reattach, align wand assembly and
slide down until it locks into place.
The Suction Diverter automatically
changes the airow from the power
nozzle to the extension wand.
Choose any of the handy accessories or
use the hose alone.
HANDLE WITH SUCTION
CONTROL SLIDE
When using attachments for cleaning
draperies, small rugs with low pile and
other delicate items, twist the suction
control slide to the open position. This
slide is located on the handle, close to
the extension wand. This will reduce
suction for ease of cleaning.
Note : Return suction control slide to
the closed position for normal
cleaning.

12
DUST BIN REMOVAL AND REPLACEMENT
After cleaning out cyclone, ensure that
cyclone cap is properly inserted and
secured in place.
WARNING
Electrical Shock and Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit.
Failure to do so could result in
electrical shock or personal injury
from vacuum cleaner suddenly
starting.
EMPTY DUST BIN
Push the dust bin release button.
Grasp dust bin by handle and pull out to
remove.
Hold dust bin over waste receptacle and
push down on thumb switch as shown
to release dust bin contents.
Turn cyclone cap to right until tab of
cyclone cap ts into notch on rim of
cyclone chamber.
Replace dust bin into vacuum cleaner.
Make sure bin base is securely tted to
body grille as shown.
Turn cyclone cap to left and pull out
to remove. Clean debris from cyclone
chamber. Replace cyclone cap.

13
ENGLISH
MOTOR FILTER MAINTENANCE
WARNING
Electrical Shock and Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit. Failure
to do so could result in electrical
shock or personal injury from vacuum
cleaner suddenly starting.
Note : Inspect and clean motor lters
on a regular basis. Based on
frequent vacuum use, replace
lters every 6 months for best
vacuuming performance.
Lift out lter case.
I
n
s
e
r
t
T
h
i
s
D
i
r
e
c
t
i
o
n
T
h
e
H
E
P
A
f
i
l
t
e
r
s
h
o
u
l
d
b
e
r
e
p
l
a
c
e
d
e
v
e
r
y
6
m
o
n
t
h
s
.
Remove dust bin as described in Dust
Bin Removal and Replacement section.
Unlock and remove the lter cover.
I
n
s
e
r
t
T
h
i
s
D
i
r
e
c
t
i
o
n
T
h
e
H
E
P
A
f
i
l
t
e
r
s
h
o
u
l
d
b
e
r
e
p
l
a
c
e
d
e
v
e
r
y
6
m
o
n
t
h
s
.
lter cover
Separate sponge lter and micro lter
from lter case.
Wash lters and case in cold water only.
Ensure lters are completely dry before
retting onto the vacuum cleaner.
Dry for at least 12 hours.
Sponge lter
Micro lter
Filter case

14
EXHAUST FILTER MAINTENANCE
Note : Inspect HEPA filter regularly for accumulation of dust and debris.
Replace if necessary. Based on frequent vacuum use, the HEPA
exhaust filter should be replaced every 6 months for best vacuuming
performance.
I
n
s
e
r
t
T
h
i
s
D
i
r
e
c
t
i
o
n
1. Remove Dust Bin and Motor Filter Case as previously described in this Use &
Care Guide.
2. Grasp HEPA filter by one of the raised plastic fins and lift up and out.
3. Observe the order shown below when reassembling the filters.
body grille
filter cover
filter case
(Sponge filter+micro filter)
HEPA filter
LIGHT BULB REPLACEMENT
1. Using a screwdriver, remove 2
screws as shown and lift off the lens.
2. Remove the bulb from the socket by
grasping bulb and pulling straight out.
3. Install the new bulb by pushing it
gently into the socket until the bulb
snaps into place.
TO REPLACE LIGHT BULB
4. Reposition lens and secure with 2
screws.
WARNING
Electrical Shock and Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit. Failure
to do so could result in electrical
shock or personal injury from vacuum
cleaner suddenly starting.

15
TABLE OF CONTENTS
ENGLISH
BELT OR BRUSHROLL REMOVAL AND REPLACEMENT
WARNING
Electrical Shock and Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit. Failure
to do so could result in electrical
shock or personal injury from vacuum
cleaner suddenly starting.
TO REMOVE BELT
TO REPLACE BELT OR
BRUSHROLL
Lay cleaner at and ip cleaner to
expose nozzle base. Base should lay
at and face up. To remove nozzle
guard, remove 6 screws.
Rotate/pivot the nozzle guard and pull
off.
Slide belt onto motor shaft.
Place new belt in area of brushroll
without bristles.
With new belt in place, pull and slide
brushroll into nozzle making sure that
the brushroll end caps are in the correct
orientation. Rotate brushroll manually to
make sure belt is properly aligned.
Reposition brush cover and 6 screws.
Tighten screws securely.
Lift and remove brushroll. Dispose of
old belt.
motor
shaft
motor
shaft
motor
shaft

16
TABLE OF CONTENTS
SUCTION DIVERTER MAINTENANCE
WARNING
Electrical Shock and Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit. Failure
to do so could result in electrical
shock or personal injury from vacuum
cleaner suddenly starting. 8. Depress the spring-loaded plunger to
straighten the diverter hose to make it
easier to clean out.
Diverter Plunger
9. To t diverter back into place, position
top of spring-loaded plunger against
rim of extension wand holder. Push
up from bottom of diverter. Once
diverter screw holes are aligned,
push down on top of diverter to settle
it into place. Replace and tighten 3
screws to secure diverter into place.
10. Replace hoses onto diverter tubes
as shown.
If you notice a decrease in suction,
you should inspect and clean out the
small hose inside the Suction Diverter
according to the following instructions.
6. Remove 3 screws from Suction
Diverter as shown.
7. Grasp the underside of the diverter
with both hands and raise up and out.
Note : There is a spring-loaded
plunger that will pop forward
when the diverter is pulled out.
1. Remove the handle and extension
wand as described in Above Floor
Cleaning section.
2. Remove power cord from cord
storage wraps.
3. Use handle release button to lower
vacuum cleaner body to lowest
position.
4. Lay vacuum cleaner on oor with
back side facing up.
5. Remove both hose ends from bottom
of Suction Diverter.

17
TABLE OF CONTENTS
ENGLISH
PET HANDIMATE MAINTENANCE
TO REPLACE BRUSHROLL
1. If a clog is present or debris is visible,
unscrew the two screws on the back
of the pet handimate to remove the
faceplate and clear any obstructions.
TO REPLACE BELT
1. Remove bottom plate. See gure in
To Replace Brushroll instructions.
2. Loop one end of new belt around
shaft of pulley.
2. Inspect condition of brushroll.
Replace brushroll if brushes are
worn down. To remove brushroll,
pull up and out of end slots in nozzle
housing. Insert ends of brushroll into
same slots to replace.
Note : Inspect belt to ensure that it
is in good condition. If belt is
broken or cracked, replace belt
according to To Replace Belt
instructions.
3. Loop other end of belt around
designated area for it on brushroll.
Insert brushroll into slots in nozzle
housing. See gure in To Replace
Brushroll instructions.
4. Fit Pet Handimate back together as
described in To Replace Brushroll
instructions.
3. Insert the four tabs on edge of
bottom plate into slots on fronts of the
faceplate. Pivot faceplate down and
secure with two screws.

18
TABLE OF CONTENTS
TROUBLESHOOTING
Review this table to nd do-it-yourself solutions for minor performance problems.
Any service needed, other than maintenance described in this Use & Care Guide,
should be performed by a Sears or other qualied service agent.
Disconnect electrical supply before performing maintenance to the
unit. Failure to do so could result in electrical shock or personal injury.
WARNING
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
Cleaner won’t run 1. Power cord not rmly plugged
into outlet.
1. Plug unit in rmly.
2. Blown house fuse or tripped
house circult breaker.
2. Check fuse or breaker in home.
Replace fuse / reset breaker.
3. Thermal protector activated. 3. Allow cleaner to cool.-Pg.5
4. Cleaner not turned on. 4. Press on/off button.
Cleaner won’t pick
up or low suction.
1. Dust bin not installed correctly 1. Review dust bin removal and
replacement - Pg.12
2. Dust bin full. 2. Empty dust bin - Pg.12
3. Brushroll worn 3. Replace brushroll - Pg.15
4. Broken or worn belt. 4. Replace belt - Pg.15
5. One or both lters clogged. 5. Remove lters and clean - Pg.13
6. Carpet height setting is
incorrect.
6. Set carpet height adjust lever
to appropriate setting for carpet
being cleaned - Pg.9
7. Vacuum circuit breaker tripped. 7. Reset breaker switch - Pg.9
8. Clog in small hose in Suction
Diverter.
8. Inspect and clean out Suction
Diverter - Pg.16
Dust escaping
from cleaner
1. Dust bin full. 1. Empty dust bin - Pg.12
2. Dust bin not installed correctly. 2. Review Dust Bin removal and
replacement - Pg.12
3. Hose not installed correctly. 3. Review hose placement - Pg.7
4. HEPA lter clogged. 4. Replace HEPA lter
5. Filter assembly not positioned
properly.
5. Ensure that lter assembly is
positioned properly.
6. Motor lter clogged. 6. Clean motor lter.
Cleaner tools won’t
pick-up
1. Hose clogged. 1. Check inlets, hose and dust
bin for obstructions: remove
obstruction. If clog persists, take
vacuum cleaner to a Sears or
other qualied service dealer.
2. Dust bin full. 2. Empty dust bin - Pg.12
3. One or both lters clogged. 3. Remove lters and clean - Pg.13
Headlight not
Working
1. Bulb burnt out. 1. Replace bulb - Pg.14
2. Loose electrical wires. 2. Take to Sears Service Center.
Cleaner is difcult
to push
1. Carpet height setting is
incorrect.
1. Set carpet height adjust lever
to appropriate setting for carpet
being cleaned - Pg.9
2. Broken or worn belt. 2. Replace belt - Pg.15

19
TABLE OF CONTENTS
ENGLISH
MASTER PROTECTION AGREEMENT
Parts and labor needed to help keep products operating properly under normal
use, not just defects. Our coverage goes well beyond the product warranty. No
deductibles, no functional failure excluded from coverage – real protection.
Expert service by a force of more than 10,000 authorized Sears service
technicians, which means someone you can trust will be working on your product.
Unlimited service calls and nationwide service, as often as you want us, when
ever you want us.
“No-lemon” guarantee – replacement of your covered product if four or more
product failures occur within twelve months.
Product replacement if your covered product can’t be xed.
Annual Preventive Maintenance Check at your request – no extra charge.
Fast help by phone – we call it Rapid Resolution – phone support from a Sears
representative on all products. Think of us as a “talking owner’s manual.”
Power surge protection against electrical damage due to power uctuations.
$250 Food Loss Protection annually for any food spoilage that is the result of
mechanical failure of any covered refrigerator or freezer.
Rental reimbursement if repair of your covered product takes longer than promised.
10% discount off the regular price of any non-covered repair service and related
installed parts.
Once you purchase the Agreement, a simple phone call is all that it takes for you to
schedule service. You can call anytime day or night, or schedule a service appointment
online.
The Master Protection Agreement is a risk free purchase. If you cancel for any reason
during the product warranty period, we will provide a full refund. Or, a prorated refund
anytime after the product warranty period expires. Purchase your Master Protection
Agreement today!
Some limitations and exclusions apply. For prices and additional information in the
U.S.A. call 1-800-827-6655.
* Coverage in Canada varies on some items. For full details call Sears Canada at
1-800-361-6665.
Sears Installation Service
For Sears professional installation of home appliances, garage door openers, water heaters,
and other major home items, in the U.S.A. or Canada call 1-800-4-MY-HOME®.
Congratulations on making a smart purchase. Your new Kenmore product is designed
and manufactured for years of dependable operation. But like all products, it may require
preventive maintenance or repair from time to time. That’s when having a Master Protection
Agreement can save you money and aggravation.
The Master Protection Agreement also helps extend the life of your new product. Here’s
what the Agreement* includes: