Kenmore 401.39030 User manual

Use &Care Guide
Manual Del Propietario
Manuel Du Propri_taire
Q
Vacuum Cleaner
Aspiradora
Aspirateur
Model, Modelo, Modele
401.39030(U.S.)
401.39035(U.S)
CAUTION:
Read and follow all
safety and operating
instructions before first
use of this product.
CUIDADO:
Lea y sigue todas las
instrucciones de operaci6n
y seguridad antes del uso de
este producto.
ATTENTION :
Veuillez life toutes les
consignes de s6curite et le
mode d'emploi avant d'utiliser
ce produit.
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. Printed in Korea
www.sears.com Impreso en Korea
Imprime en Korea

Before Using Your New Vacuum
Cleaner ............................................ 2
Kenmore Vacuum
Cleaner Warranty ........................... 3
Important Safety
Instructions ................................. 4=5
Parts and Features ......................... 6
Assembly Instructions ............... 7-8
Operating Instructions ............. 8-10
Power Cord .................................. 8
Switch Operating ........................... 9
Floor/Carpet Cleaning ............ 9-10
Above Floor Cleaning .................. 11
Vacuum Cleaner Care ............. 11-17
Vacuum Cleaner Storage ............ 11
Dust Bin Removal and Replacement 12
Motor Filter Maintenance ............ 13
Exhaust Filter Maintenance ......... 14
Light Bulb Replacement .............. 14
Belt or Brushrolt Removal and
Replacement ............................... 15
Suction Diverter Maintenance .....16
Mini Turbo Brush Replacemens ..17
Troubleshooting ........................... 18
Master Protection Agreements ...19
Requesting Service ..... (back page)
Please read this guide. It will help you assemble and operate your new Kenmore
vacuum cleaner in the safest and most effective way.
For more information about vacuum cleaner care and operation, call your
nearest Sears store. You will need the complete model and serial numbers when
requesting information.
Your vacuum cleaner's model and serial numbers are located on the Model and
Serial Number Plate.
Use the space below to record the model number and serial number dyour new
Kenmore vacuum cleaner.
Model No.
Serial No.
Date of Purchase
Keep this book and your sales check (receipt) in a safe place for future reference.

ONE YEAR LiMiTED WARRANTY ON KENMORE VACUUM CLEANER
When installed, operated and maintained according to all instructions supplied
with the product, if this appliance fails due to a defect in material and workmanship
within one year from the date of purchase, return it to any Sears store, Sears
Parts & Repair Service Center, or other Kenmore outlet for free repair.
If this appliance is ever used for other than private family purposes, this warranty
applies for only 90 days from the date of purchase.
This warranty covers only defects in material and workmanship.
Sears will NOT pay for:
1. Expendable items that can wear out from normal use, including but not
limited to filters, belts, light bulbs, and bags.
2. A service technician to instruct the user in correct product installation,
operation or maintenance.
3. A service technician to clean or maintain this product.
4. Damage to or failure of this product if it is not installed, operated or
maintained according to the all instructions supplied with the product.
5. Damage to or failure of this product resulting from accident, abuse, misuse
or use for other than its intended purpose.
6. Damage to or failure of this product caused by the use of detergents,
cleaners, chemicals or utensils other than those recommended in all
instructions supplied with the product.
7. Damage to or failure of parts or systems resulting from unauthorized
modifications made to this product.
Disclaimer of implied warranties; limitation of remedies
Customer's sole and exclusive remedy under this limited warranty shall be
product repair as provided herein. Implied warranties, including warranties of
merchantability or fitness for a particular purpose, are limited to one year or
the shortest period allowed by law. Sears shall not be liable for incidental or
consequential damages. Some states and provinces do not allow the exclusion or
limitation of incidental or consequential damages, or limitation on the duration of
implied warranties of merchantability or fitness, so these exclusions or limitations
may not apply to you.
This warranty applies only while this appliance is used in the United States or
Canada.
This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
Sears, Roebuck and Co., Hoffman Estates, IL 60179
Sears Canada Inc., Toronto, Ontario, Canada MSB 2B8

WARNING
Your safety is important to us. To reduce the risk of
fire, electrical shock, injury to persons or damage
when using your vacuum cleaner, follow basic safety
precautions including the following:
READ ALL INSTRUCTIONS IN
THIS MANUAL BEFORE
ASSEMBLING OR USING YOUR
VACUUM CLEANER.
Do not use outdoors or on wet
surfaces. Electrical shock could
OCCUr.
Do not allow to be used as a toy.
Close attention is necessary when
used by or near children.
Use only as described in this manual.
Only use attachments designed for
this vacuum.
Do not use with damaged cord or
plug. If appliance isnot working as
it should, has been dropped,
damaged, left outdoors, or dropped
intowater, return it to a Sears or other
qualified service center for inspection.
Do not pull or carry by cord, use cord
as handle, close a door on a cord,
or pull cord around sharp edges or
corners. Do not run appliance over
cord. Keep cord away from heated
surfaces.
Do not unplug by pulling on cord.
To unplug, grasp the plug, not the
cord.
Do not leave appliance when
plugged in. Unplug from outlet when
not in use and before servicing.
Do not handle plug or
appliance with wet hands.
Do not put any objects into openings.
Do not use with any opening blocked;
keep free of dust, lint, hair, and
anything that may reduce air flow.
Keep hair, loose clothing, fingers, and
all parts of body away from openings
and moving parts.
Do not pick up anything that
is burning or smoking, such as
cigarettes, matches, or hot ashes.
Do not use without Dust Bin and
filters in place.
Turn off all controls before
unplugging.
Do not use to pick-up flammable or
combustible liquids, such as gasoline,
or use in areas where they may be
present.
Keep the vacuum cleaner on the
floor. Do not use on stairs.
Do not use an extension cord with
this vacuum cleaner.
Store the vacuum cleaner indoors.
Put vacuum cleaner away after use
to prevent tripping accidents.

Usingimpropervoltagemayresult
indamagetothemotorand
possibleinjurytotheuser.Proper
voltageislistedonthecleaner
plate.
WARNING:Thecords,wires,and/
orcablessuppliedwiththisproduct
containschemicals,including
leadorleadcompounds,known
tothestateofCaliforniatocause
cancerandbirthdefectsorother
reproductiveharm.Washhands
afterusing.
SAVE THESE INSTRUCTIONS
Proper assembly and safe use of your vacuum cleaner are your
responsibilities. Your vacuum cleaner is intended only for Household
use. Read this Use & Care Guide carefully for important use and safety
information. This guide contains safety statements under warning and
caution symbols. Please pay special attention to these boxes and follow any
instructions given.
Your cleaner contains a thermal protective device to shut off the motor to
avoid overheating. If this happens, turn switch off and unplug the cleaner.
Inspect the exhaust, inlet, and filters for any blockage. Empty the dust bin and
clean filters. After approximately 30 minutes the motor will have cooled and
the vacuum will be ready to use.
Note : The cleaner must remain unplugged during the 30 minute cooling period.
CAUTION : Even though the main motor is shutted off, the power nozzle
brushroll could not stop. Turn off the power nozzle brushroll switch
before inspect the cleaner. After approximately 30 minutes the
motor will have cooled and the vacuum will be ready to use.
Note : The cleaner must remain unplugged during the 30 minute cooling period.

it is important to know your vacuum cleaner's parts and features
to assure its proper and safe use. Review these before using your
vacuum cleaner.
Item Part No.
HEPA Filter DJ97-00984D
Headlight DJ47-00004A
Accessories
Crevice Tool MiniTurbo
Brush
Dust Brush/ I
Upholstery Tool j
QU_kppRel_as_ Mini turbo __ _ _vXat:ds'°n
Heig: ___ iiit°HIBS!idrs_: _ _D,verter
AdJustKeont Headlight
P°z_Ter ReleasH_nd_ _ _ _ii
FRONT BACK

Please pay special attention to these hazard alert boxes, and follow any
Z_ instructions given. WARNING statements alert you to such dangers as fire,
electric shock, burns and personal injury. CAUTION statements alert you to
such dangerous personal injury and/or property damage.
WARNING
Electrical Shock Hazard
Do not plug into the electrical
supply until the assembly is
complete. Failure to do so could
result in electrical shock or injury.
Before assembling the vacuum
cleaner, check the PACKING LIST
on the cover of the separate REPAIR
PARTS LIST or on the carton.
Use this list to verify that you have
received all the components of your
new Kenmore vacuum cleaner.
HANDLE ASSEMBLY
1. Slide fully retracted extension wand
into the handle until you hear a click.
2. Slide fully retracted wand and handle
into the slot on body until you hear a
click.
CAUTION
Do not overtighten.
Overtightening could strip the
screw holes.
Do not operate the vacuum cleaner
without the screws in place.
3. Slide fully retracted hose into the
handle until you hear a click.
9o.......................
_'2221 ;
4. Extend the hose and fix into the two
hose guides clown the back of the
vacuum cleaner.
5. Slide slot in hose end over tab on
control tube. Turn hose to right to
secure tab in slot.

TOOL PLACEMENT
Place mini turbo brush (A)into the
tool holder on side of the body. Place
dust brush/upholstery tool (B) into its
accessory holder on side of the body.
Place crevice tool (C) into its accessory
holder on side of the body. c
OPERATING INSTRUCTIONS
1. Turn the quick release upper cord
wrap to either side and down to
release the power cord.
WARNING
To reduce the risk of electric shock,
this appliance has a polarized
plug (one blade is wider than
the other). This plug wilt fit in a
polarized outlet only one way. If the
plug does not fit fully in the outlet,
reverse the plug. If it still does not
fit, contact a qualified electrician
to install the proper outlet. Do not
change the plug in any way.
2. Unclip the power cord plug from the
power cord. Place the power cord into
the cord clip on the body as shown.
This helps keep the power cord
out from under the vacuum cleaner
nozzle.
3. Plug the polarized power cord into a
120Volt outlet located near the floor.
4. Tostore cord, turn upper cord hook to
the up position, then wrap cord.
, WARNING
Personal Injury and Product
Damage Hazard
• DO NOT plug in if switch is in the
ON position. Personal injury or
damage could result.
•DO NOT use outlets above
counters. Damage from cord to
items in surrounding area could
OCCUr.

DustBin
Release Wand
Release
BrushRoll
On/Off
Power switch/Power
Nozzle brushroll switch
The Power on/off button is located on
the top of vacuum body.
Turn on vacuum by power button after
plugging cord into electrical outlet.
The Power nozzle brush on/off button
turns the rotating brushroll on and off.
Turn brushroll switch on to clean carpet
and rugs.
Turn brushroll switch off to clean hard
surface floors.
The brushroll will automatically turn
offwhen the handle is in the upright
position.
Circuit breaker
(Reset switch)
The circuit breaker turns off the brush-
roll if its motion becomes obstructed.
The brushroll will stop, but the suction
motor will continue to run.
Toreset the breaker, turn cleaner off
and unplug it. Clear the obstruction from
brushroll area.
Press reset switch to the on position,
turn cleaner on and continue
cleaning.
HEIGHT ADJUST KNOB
1. Place handle in upright position
2. Turn height adjustment knob to
desired setting
Lowest setting - For bare floors
4-step carpet setting - For various
carpet heights
Low carpet setting
- For short pile carpets
intermediate carpet settings
- For medium pile carpets
High carpet setting
- For plush pile carpets
Note : For optimal cleaning
performance, adjust to the lowest
practical setting. If your cleaner is
difficult to push, adjust to the next
higher setting.

,_::__i,__ i:_i_;;!i_ii_iiiii_i
HANDLE RELEASE
Torelease handle, push the handle
release pedal located on the lower left
side of the cleaner.
A
Rotate the handle and adjust it to the
desired position for (A) storing the
upright, (B) operating the cleaner, and
(C) to clean under furniture.
NOTE : Rotating brushroll could cause
area rug fringe to become
tangled within cleaner. Use
caution when vacuuming any
rugs with fringe.
!
CLEANING TOOLS
Attachment tools can be used to clean
furniture, drapes, stairs, or in corners.
Place the vacuum on the floor with
handle in the upright position while
using attachment tools.
EXTENSION WAND
Adjust the length of the extension wand
by sliding the length control button
located in the center of the extension
wand back and forth.
10

Z CAUTION
Brush agitator continues to rotate
while hose is removed or in use and
at all times while cleaner is on. Keep
hair, loose clothing, fingers, and all
parts of body away from brush area
while cleaner is on. Cleaner must
be in the upright position to lift the
rotating brushroll off the carpet when
cleaning above the floor.
Put the cleaner in the upright position
to stop the brushroll rotating, or simply
press the brushroll on/off button.
Press the wand release button. While
pressing the wand release button, push
down on handle and then pull it up and
out. The Suction Diverter automatically
changes the airflow from the power
nozzle to the extension wand.
Choose any of the handy accessories or
use the hose alone.
Simply push the attachment firmly onto
the end of the wand or hose handle. To
remove tool, twist and pull apart gently.
HANDLE WITH SUCTION
CONTROL SLIDE
When using attachments for cleaning
draperies, small rugs with low pile and
other delicate items, twist the suction
control slide to the open position. This
slide is located on the handle, close to
the extension wand. This will reduce
suction for ease of cleaning.
Note "Return suction control slide to
the closed position for normal
cleaning.
Z
VACUUM CLEANER CARE
cord. Store the vacuum cleaner in a dry,
indoor area, on the floor with the handle
locked in the upright and position.
Gather the cord and wrap it loosely
around the upper and lower cord wraps.
Lock power cord plug onto the power
z WARNING
Electrical Shock and Personal Injury
Hazard Wrapping the cord too tightly
puts stress on the cord and can
cause cord damage.
11

Z WARNING
Electrical Shock and Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit.
Failure to do so could result in
electrical shock or personal injury
from vacuum cleaner suddenly
starting.
EMPTY DUST BIN
Push the dust bin release button.
Grasp dust bin by handle and pull out to
remove.
Hold dust bin over waste receptacle and
push down on thumb switch as shown
to release dust bin contents.
Turn cyclone cap to left and pull out
to remove. Clean debris from cyclone
chamber. Replace cyclone cap. 12
After cleaning out cyclone, ensure that
cyclone cap is properly inserted and
secured in place.
Turn cyclone cap to right until tab of
cyclone cap fits into notch on rim of
cyclone chamber.
Replace dust bin into vacuum cleaner.
Make sure bin base is securely fitted to
body grille as shown.

Z WARNING
Electrical Shock and Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit. Failure
to do so could result in electrical
shock or personal injury from vacuum
cleaner suddenly starting.
Note : Inspect and clean motor filters
on a regular basis. Based on
frequent vacuum use, replace
filters every 6 months for best
vacuuming performance.
Remove dust bin as described in Dust
Bin Removal and Replacement section.
filter cover
Unlock and remove the filter cover.
Lift out filter case.
13
filter
Separate sponge filter and micro filter
from filter case.
Wash filters and case in cold water only.
Dry for at least 12 hours.
Ensure filters are completely dry before
refitting onto the vacuum cleaner.

Note : Inspect HEPA filter regularly for accumulation of dust and debris.
Replace if necessary. Based on frequent vacuum use, the HEPA
exhaust filter should be replaced every 6 months for best vacuuming
performance.
1. Remove Dust Bin and Motor Filter Case as previously described in this Use &
Care Guide.
2. Grasp HEPA filter by one of the raised plastic fins and lift up and out.
3. Observe the order shown below when reassembling the filters.
filtercover
Ii
L , Iq-----filter case
(Spongefilter+microfilter)
I _HEPA filter
8
body
grille
Z WARNING
Electrical Shock and Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit. Failure
to do so could result in electrical
shock or personal injury from vacuum
cleaner suddenly starting.
1. Using a screwdriver, remove 2
screws as shown and lift off the lens.
2. Remove the bulb from the socket by
grasping bulb and pulling straight out.
3. Install the new bulb by pushing it
gently into the socket until the bulb
snaps into place.
TO REPLACE LIGHT BULB
4. Reposition lens and secure with 2
screws.
14

Z_WARNING
Electrical Shock and Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit. Failure
to do so could result in electrical
shock or personal injury from vacuum
cleaner suddenly starting.
TO REMOVE BELT
Lay cleaner flat and flip cleaner to
expose nozzle base. Base should lay
flat and face up. Toremove nozzle
guard, remove 6 screws.
Rotate/pivot the nozzle guard and pull
off.
Lift and remove brushroll. Dispose of
old belt.
15
TO REPLACE BELT OR
BRUSHROLL
Slide belt onto motor shaft.
Place new belt in area of brushroll
without bristles.
With new belt in place, pull and slide
brushroll into nozzle making sure that
the brushroll end caps are in the correct
orientation. Rotate brushroll manually to
make sure belt is properly aligned.
Reposition brush cover and 6 screws.
Tighten screws securely.

Z WARNING
Electrical Shock and Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit. Failure
to do so could result in electrical
shock or personal injury from vacuum
cleaner suddenly starting.
If you notice a decrease in suction,
you should inspect and clean out the
small hose inside the Suction Diverter
according to the following instructions.
1. Remove the handle and extension
wand as described in Above Floor
Cleaning section.
2. Remove power cord from cord
storage wraps.
3. Use handle release button to lower
vacuum cleaner body to lowest
position.
4. Lay vacuum cleaner on floor with
back side facing up.
5. Remove both hose ends from bottom
of Suction Diverter.
6. Remove 3 screws from Suction
Diverter as shown.
7. Grasp the underside of the diverter
with both hands and raise up and out.
Note : There is a spring-loaded
plunger that will pop forward
when the diverter is pulled out.
DiverterPlunc
8. Depress the spring-loaded plunger to
straighten the diverter hose to make it
easier to clean out.
9. To fit diverter back into place, position
top of spring-loaded plunger against
rim of extension wand holder. Push
up from bottom of diverter. Once
diverter screw holes are aligned,
push down on top of diverter to settle
it into place. Replace and tighten 3
screws to secure diverter into place.
iili,¸
10. Replace hoses onto diverter tubes
as shown.
16

TO REPLACE BRUSHROLL
1. Slide the switch to the unlock position
and remove bottom plate.
2. Inspect condition of brushroll.
Replace brushroll if brushes are
worn down. To remove brushroll,
pull up and out of end slots in nozzle
housing. Insert ends of brushroll into
same slots to replace.
Note : Inspect belt to ensure that it
is in good condition, tf belt is
broken or cracked, replace belt
according to To Replace Belt
instructions.
3. Insert the four tabs on edge of
bottom plate into slots on front of
tool. Pivot bottom plate down and
snap closed. Slide switch to lock
position to secure the bottom plate
in place.
TO REPLACE BELT
1. Remove bottom plate by sliding
switch to unlock position. See figure
in To Replace Brushroll instructions.
2. Loop one end of new belt around
shaft of pulley.
3. Loop other end of belt around
designated area for it on brushroll.
Insert brushroll into slots in nozzle
housing. See figure in To Replace
Brushroll instructions.
4. Fit turbo brush back together as
described in To Replace Brushroll
instructions.
17

Review this table to find do-it-yourself solutions for minor performance problems.
Any service needed, other than maintenance described in this Use & Care Guide,
should be performed by a Sears or other qualified service agent.
Z_ Disconnect electrical supply before performing maintenance to the
unit. Failure to do so could result in electrical shock or personal injury.
WARNING
II
PROBLEM IPOSSIBLE CAUSE POSSIBLE SOLUTION
Cleaner won't run
Cleaner won't pick
up or low suction.
Dust escaping
from cleaner
Cleaner tools won't
pick-up
Headlight not
Working
Cleaner is difficult
to push
1. Power cord not firmly plugged
into outlet.
2. Blown house fuse or tripped
house circuit breaker.
3. Thermal protector activated.
4. Cleaner not turned on.
1. Dust bin not installed correctly
2. Dust bin full. 2.
3. Brushroll worn 3.
4. Broken or worn belt. 4.
5. One or both filters clogged. 5.
6. Carpet height setting is 6.
incorrect.
7.
8.
7. Vacuum circuit breaker tripped.
8. Clog in small hose in Suction
Diverter.
1. Dust bin full.
2. Dust bin not installed correctly.
3. Hose not installed correctly.
4. HEPA filter clogged.
5. Filter assembly not positioned
properly.
6. Motor filter clogged.
1. Hose clogged.
2. Dust bin full.
3. One or both filters clogged.
1. Bulb burnt out.
2. Loose electrical wires.
1. Carpet height setting is
incorrect.
2. Broken or worn belt.
1. Plug unit in firmly.
2. Check fuse or breaker in home.
Replace fuse /reset breaker.
3. Allow cleaner to cool.-Pg.5
4. Press on/off button.
1. Review dust bin removal and
replacement - Pg.12
Empty dust bin - Pg.12
Replace brushro!l- Pg.15
Replace belt- Pg.15
Remove filters and clean - Pg.13
Set carpet height adjust lever
to appropriate setting for carpet
being cleaned - Pg.9
Reset breaker switch - Pg.9
Inspect and clean out Suction
Diverter- Pg.16
1. Empty dust bin - Pg.12
2. Review Dust Bin removal and
replacement - Pg.12
3. Review hose placement - Pg.7
4. Replace HEPA filter
5. Ensure that filter assembly is
positioned properly.
6. Clean motor filter.
1. Check inlets, hose and dust
bin for obstructions: remove
obstruction. If ctog persists, take
vacuum cleaner to a Sears or
other qualified service dealer.
2. Empty dust bin - Pg.12
3. Remove filters and clean - Pg.13
1. Replace bulb - Pg.14
2. Take to Sears Service Center.
1. Set carpet height adjust lever
to appropriate setting for carpet
being cleaned - Pg.9
2. Replace belt- Pg.15
18

Congratulations on making asmart purchase. Your new Kenmore product is designed
and manufactured for years of dependable operation. But like all products, it may require
preventive maintenance or repair from time to time. That's when having a Master Protection
Agreement can save you money and aggravation.
The Master Protection Agreement also helps extend the life of your new product. Here's
what the Agreement* includes:
Parts and labor needed to help keep products operating properly under normal
use, not just defects. Our coverage goes well beyond the product warranty. No
deductibles, no functional failure excluded from coverage - real protection.
,/ Expert service by a force of more than 10,000 authorized Sears service
technicians, which means someone you can trust will be working on your product.
•/Unlimited service calls and nationwide service, as often as you want us, when
ever you want us.
,/ "No-lemon" guarantee - replacement of your covered product if four or more
product failures occur within twelve months.
Product replacement if your covered product can't be fixed.
Annual Preventive Maintenance Check at your request - no extra charge.
,/ Fast help by phone - we call it Rapid Resolution - phone support from a Sears
representative on all products. Think of us as a "talking owner's manual."
Power surge protection against electrical damage due to power fluctuations.
,/ $250 Food Loss Protection annually for any food spoilage that is the result of
mechanical failure of any covered refrigerator or freezer.
,/ Rental reimbursement if repair of your covered product takes longer than promised.
,/ 10% discount off the regular price of any non-covered repair service and related
installed parts.
Once you purchase the Agreement, a simple phone call is all that it takes for you to
schedule service. You can call anytime day or night, or schedule a service appointment
online.
The Master Protection Agreement is a risk free purchase. If you cancel for any reason
during the product warranty period, we will provide a full refund. Or, a prorated refund
anytime after the product warranty period expires. Purchase your Master Protection
Agreement today!
Some limitations and exclusions apply. For prices and additional information in the
U.S.A. call 1-800-827-6655.
* Coverage in Canada varies on some items. For full details call Sears Canada at
1-800-361-6665.
Sears Installation Service
For Sears professional installation of home appliances, garage door openers, water heaters,
and other major home items, in the U.S.A. or Canada call 1-SOO-4-MY-HOME ®.
19

Get itfixed, at your home or ours!
Your Home
For expert troubleshooting and home solutions advice:
m aNa g@ _ horn@
www,managemyhorne.com
For repair - in your home - of all major brand appliances,
lawn and garden equipment, or heating and cooling systems,
no matter who made it, no matter who sold it !
For the replacement parts, accessories and
owner's manuals that you need to do-it-yourself.
For Sears professional installation of home appliances
and items like garage door openers and water heaters.
1-800-4-MY-HOME ® ca, anytime, day or night
(1-800-469-4663) (U.S.A. and Canada)
www.sears.com www.sears.ca
Our Home
For repair of carry-in items like vacuums, lawn equipment,
and electronics, call anytime for the location of the nearest
Sears Parts &Repair Service Center
1-800-488-1222 (U.S.A.) 1-800-469-4663 (Canada)
www.sears.com www.sears.ca
To purchase a protection agreement on a product serviced by Sears:
1-800-827-6655 (U.S.A.) 1-800-361-6665 (Canada)
Para pedir servicio de reparaci6n
adomicilio, y para ordenar piezas:
1-888-SU-HOGAR®
(1-888-784-6427)
Au Canada pour service en fran_ais:
1-800-LE-FOYER Mc
(1-800-533-6937)
www,sears.ca
© Sears Brands, LLC
TM SM
® Registered Trademark /Trademark /Service Mark of Sears Brands, LLC
TM SM
® Marca Registrada /Marca de F&brica /Marca de Servicio de Sears Brands, LLC
MC MD
Marque de commerce /Marque depos6e de Sears Brands, LLC