Hanging instructions
If installing to stud(s), please see below:
1.Measure the distance between the
brackets or keyholes (If there is only
one bracket or keyhole, skip this step),
mark spot(s) on the wall.
2A.Install nail(s) (not supplied)
to the stud(s).
If installing to drywall, please see below:
2B.Drill pilot hole(s) on the marked
spot(s) and insert plastic anchor(s) (not
supplied).
2C.Install wood screw(s) (not
supplied) to the plastic anchor(s).
3.Hang wall clock to wall by attaching
the bracket(s) or keyhole(s) on back of the
wall clock to the nail(s) or wood screw(s).
NOTE: Hardware not supplied, contact
your local hardware professional to
choose an attachment mechanism
appropriate for your wall.
Wood screw
(not supplied)
Hole in wall
Plastic anchor
(not supplied)
Wall clock
Keyhole
OR
Brackets
(2 pcs)
Care and maintenance
Cleaning
Clean with a soft, dry cloth.
Do not use any cleaners with
chemicals, solvents, or harsh abrasives.
Storage
Remove the battery before storing the
wall clock.
