Kenroy Home 61021 User manual

USE AND CARE GUIDE
ATTICUS WALL MIRROR-#61021
(This mirror is suitable for use in the bathroom)
Questions, problems, missing parts? Before returning to the store,
call Kenroy Home Customer Service
8 a.m.-6 p.m., EST, Monday-Friday
904-642-4340
THANK YOU
We appreciate the trust and confidence you have placed in Kenroy Home through the purchase of this mirror.
We strive to continually create quality products designed to enhance your home.
Thank you for choosing us!

You should have received the following parts in the package.
Please ensure that all parts are accounted for.
1 PC
A
Mirror
SUGGESTED TOOLS (NOT SUPPLIED)
Phillips
Screwdriver
Drill
Hammer
PencilLevel
NOTE: This mirror is suitable for use in the bathroom.
21 PC
C
Set screw
21 PC
B
Glass rod
1 PC
D
Allen wrench
Shown to scale

Installation instructions
If installing to studs, please see below:
1.Insert the (20) glass rods (B) (one
free replacement glass rod included)
into the holes in mirror (A), and then
secure with (20) set screws (C).
NOTE: To prevent breaking the glass
rods, do not over tighten the set screws
(C). (Allen wrench (D) included)
3A.Install (2) nails (not supplied)
to the studs.
If installing to drywall, please see below:
3B.Drill pilot holes on the marked
spots and insert (2) plastic anchors (not
supplied).
3C.Install (2) wood screws (not
supplied) to the (2) plastic anchors.
4.Hang mirror (A) to wall by attaching
the brackets on back of the mirror to the
nails or wood screws.
NOTE: Hardware not supplied, contact
your local hardware professional to
choose an attachment mechanism
appropriate for your wall.
Wood screw
(not supplied)
Hole in wall
Plastic anchor
(not supplied)
A
2.Measure the distance between the
brackets, mark spots on the wall.
BACK VIEW: D
C
B
A
A
Brackets
(2 pcs)

904-642-4340
@KenroyHome
[email protected]
CUSTOMER SUPPORT TEAM
For any additional questions or concerns please contact our
Customer Support Team:
www.kenroyhome.com