Kenwood Nexedge KTI-4 User manual

KTI-4
Telephone Interconnect Adapter
http://nexedge.kenwood.com
Expand
Your Reach
Kenwood now offers an easy way to
add telephone interconnect to your
NEXEDGE®trunked system.
The KTI-4 Telephone Interconnect Adapter connects
NEXEDGE®NXR-700/800-based trunked system to analogue
telephone patch such as the Zetron Model 30 / Model 735,
providing outbound radio to phone system calls and phone
system to radio calls. The KTI-4 serves as modulator or
demodulator between the NEXEDGE®digital system and
the analogue PSTN/PABX system. KTI-4 units can be
installed at trunked site or anywhere in the world through
a VPN connection. Offices located anywhere can call radio
users on a factory floor or in the field and vice-versa.
KTI-4 Interconnect Adapter
Web browser interface
Main features
•KTI-4 On-site & Off-site Installations
•Up to 6 KTI-4 Lines per Trunked Site
•Up to 100 KTI-4 Lines per Trunked Network
•Independent Inbound & Outbound Calls Enabled
•Speed Dial:
zLimit Calls to Specific Phone Numbers / PABX Extensions
z255 Numbers Max. (32 digits per number)
•Call Restrictions Settings:
zPermit / Inhibit Toll, Long Distance and International Dialing
zPermit / Inhibit Pay Per Call Services
•AMBE+2™Vocoder (digital / analogue speech conversion)
•NXDN®Scrambler: Secure Voice in Both Directions
•Customisable DTMF Command Sets
•DTMF Tone Timers:
zMatch Interconnect Brand / Model
zMatch Phone System Requirements
•Status LEDs: Power, Communications, Full Duplex, 100-Base TX
Note: The NEXEDGE®KTI-4 requires an external telephone patch that meets telephony regulations in
the country of use and compatible with KTI-4 specifications (see back).

CL718M-E-2
JQA-QMA1205
Kenwood has always connected with people through sound. Now we want to expand the world of sound in ways that only Kenwood can,
listening to our customers and to the pulse of the coming age as we head toward a future of shared discovery, inspiration and enjoyment.
Installation and Connection
KTI-4
Operating Voltage Standard 13.6 V DC
Range 10.8 ~ 15.9 V DC
Current Rating 200 mA max.
Temperature Range -30°C ~ +60°C
Dimensions W x H x D
(projections not included) 106 x 32 x 125 mm
Weight 560 g
Approved Standards FCC Part 15 Subpart B
IC IC ES-003
EMC EN55022, EN55024
Safety EN60950-1, EN 60065
Main Specifications
Telephone Patch Cable
*Must use Model 30 Revision 1.03 or later for KTI-4 use.
Recommended Telephone Patch
Kenwood reserves the right to change specifications without prior notice of obligation.
AMBE+2™ is a trademark of Digital Voice System Inc.
NXDN®is a registered trademark of Kenwood Corporation and Icom Inc.
NEXEDGE®is a registered trademark of Kenwood Corporation.
Model 30*
WORLDPATCH
Rear
Model 735
RADIO TELECONNECT