Kenwood KDC-U5049DAB User manual

KDC-U5049DAB
CD-RECEIVER
INSTRUCTION MANUAL
B64-4835-00/01 (MW)© 2011 Kenwood Corporation All Rights Reserved.
B64-4835-0001MEnglish.indd1B64-4835-0001MEnglish.indd1 11/03/0711:1011/03/0711:10

2 English
CONTENTS
Safety 3
Maintenance
The marking of products using lasers
Preparation 4
How to attach/detach the faceplate
How to reset your unit
How to prepare the remote controller
(RC-405)
Basic Operations 6
Muting upon the reception of a phone call
Getting Started 8
Canceling the display demonstration
Setting the demonstration mode
Adjusting the clock
Initial settings before operations
Listening to the DAB 10
Selecting a service
Alphabet Search for service
Updating Service List information
Display Selection
Adjust [SETTINGS] mode settings
Listening to the Radio 12
Display Selection
Adjust [SETTINGS] mode settings
Listening to a Disc/
USB device/ iPod 14
Start playing a disc
Start playing a USB device or iPod
Removing the USB device or iPod
Start playing the disc changer (optional
accessory)
Selecting Repeat Play
Selecting Random Play
All Random Play
Selecting Magazine Random Play
Selecting Scan Play
Selecting a folder/track/file
Alphabet Search for iPod
Direct Music Search using the remote
controller (RC-405)
Direct Disc Search using the remote
controller (RC-405)
My Playlist for iPod
iPod control by Hand mode
Adjust [SETTINGS] mode settings
Operation of Hands-Free Phoning20
Getting Started
Making a Call
Receiving a Call
During a Call
Call Waiting
Clearing the Disconnection Message
Downloading the Phone Book
Bluetooth Setup 24
Registering Bluetooth Device (Pairing)
Selecting the Bluetooth Device
Setting a Voice Command
Bluetooth Setup
SMS (Short Message Service) 28
Downloading the SMS
Display the SMS
Listening to the other external
components 29
Function settings 30
Installation/connection 32
Troubleshooting 39
Specifications 42
B64-4835-0001MEnglish.indd2B64-4835-0001MEnglish.indd2 11/03/0711:1011/03/0711:10

English 3
WARNING
Stop the car before operating the unit.
Important to know...
■ To prevent a short circuit, never put or leave
any metallic objects (such as coins or metal
tools) inside the unit.
■ Caution: Adjust the volume so that you can
hear sounds outside the car. Driving with
the volume too high may cause an accident.
■ Condensation: When the car is air-
conditioned, moisture may collect on the
laser lens. This may cause disc read errors. In
this case, remove the disc and wait for the
moisture to evaporate.
■ The illustrations in this manual are examples
used to explain more clearly how the
controls are used. Therefore, what appears
on the illustrations may differ from what
appears on the actual equipment.
■ If you experience problems during
installation, consult your Kenwood dealer.
■ When you purchase external components,
check with your Kenwood dealer to make
sure that they work with your model and in
your area.
Maintenance
Cleaning the unit: Wipe off the dirt on the
panel with a dry silicon or soft cloth. Failure
to observe this precaution may result in
damage to the monitor or unit.
Cleaning the connector: Wipe off dirt on
the connector of the unit and faceplate. Use
a cotton swab or cloth.
Safety
The marking of products using
lasers
CLASS 1
LASER PRODUCT
The label is attached to the chassis/case and
says that the component uses laser beams
that have been classified as Class 1.
It means that the unit is utilizing laser
beams that are of a weaker class. There is
no danger of hazardous radiation outside
the unit.
B64-4835-0001MEnglish.indd3B64-4835-0001MEnglish.indd3 11/03/0711:1011/03/0711:10

4 English
Preparation
How to attach/detach the faceplate
1
2
1
2
■ Do not expose the faceplate to direct
sunlight, excessive heat, or humidity. Also
avoid places with too much dust or the
possibility of water splashing.
■ Keep the faceplate in its casing while
detached.
■ The faceplate is a precision piece of
equipment and can be damaged by shocks
or jolts.
■ To prevent deterioration, do not touch the
terminals of the unit and faceplate with your
fingers.
How to reset your unit
3
If this unit fails to operate
properly, press the reset
button.
The unit returns to factory
settings when the reset
button is pressed.
Reset button
1
2
How to prepare the remote
controller (RC-405)
When you use the remote controller for the
first time, pull out the insulation sheet.
Insulation sheet
If the effectiveness of the remote
controller decreases, replace the battery.
1
2
3
4
¤Caution:
■ Do not set the remote control in hot places
such as on the dashboard.
■ Lithium battery.
Danger of explosion if the battery is
incorrectly replaced. Replace only with the
same or equivalent type.
■ The battery pack or batteries shall not be
exposed to excessive heat such sunshine,
fire or the like.
■ Keep battery out of reach of children and in
original package until ready to use. Dispose
of used batteries promptly. If swallowed
contact physician immediately.
B64-4835-0001MEnglish.indd4B64-4835-0001MEnglish.indd4 11/03/0711:1011/03/0711:10

English 5
■ “Made for iPod” and “Made for iPhone”
mean that an electronic accessory has
been designed to connect specifically
to iPod or iPhone, respectively, and has
been certified by the developer to meet
Apple performance standards. Apple is not
responsible for the operation of this device
or its compliance with safety and regulatory
standards. Please note that the use of this
accessory with iPod or iPhone may affect
wireless performance.
■ iPhone, iPod, iPod classic, iPod nano, and
iPod touch are trademarks of Apple Inc.,
registered in the U.S. and other countries.
This symbol mark indicates
that Kenwood manufactured
this product so as to decrease
harmful influence on the
environment.
B64-4835-0001MEnglish.indd5B64-4835-0001MEnglish.indd5 11/03/0711:1011/03/0711:10