Kenwood KMM-BT304 User manual

KMM-BT304
KMM-BT204
KMM-304Y
DIGITAL MEDIA RECEIVER
INSTRUCTION MANUAL
Ц И Ф Р О В О Й М Е Д И А -Р Е С И В Е Р
И HCTPУ KЦ И Я П O Э KCП Л У ATAЦ И И
B5A-2106-10 (EN/E2N)© 2017 JVC KENWOOD Corporation

i
For Israel
Д а т а и з г о т о в л е н и я (м е с я ц /г о д ) н а х о д и т с я н а э т и к е т к е у с т р о й с т в а .
В с о о т в е т с т в и и с З а к о н о м Р о с с и й с к о й Ф е д е р а ц и и “О з а щ и т е п р а в п о т р е б и т е л е й ” с р о к сл у ж б ы
(г о д н о с т и ) д а н н о г о т о в а р а “п о и с т е ч е н и и к о т о р о г о о н м о ж е т п р е д с т а в л я т ь о п а с н о с т ь д л я ж и з н и ,
з д о р о в ь я п о т р е б и т е л я , п р и ч и н я т ь в р е д е г о и м у щ е с т в у и л и о к р у ж а ю щ е й с р е д е ” с о с т а в л я е т се м ь (7)
л е т с о д н я п р о и з в о д с т в а .
Д о п о л н и т е л ь н ы е к о с м е т и ч е с к и е м а т е р и а л ы к д а н н о м у т о в а р у , п о с т а в л я е м ы е в м е ст е с н и м , м о г у т
х р а н и т ь с я в т е ч е н и е д в у х (2) л е т с о д н я е г о п р о и з в о д с т в а .
С р о к с л у ж б ы (г о д н о с т и ), к р о м е с р о к а х р а н е н и я д о п о л н и т е л ь н ы х к о см е т и ч е ск и х м а т е р и а л о в ,
у п о м я н у т ы х в п р е д ы д у щ и х д в у х п у н к т а х , н е з а т р а г и в а е т н и к а к и х д р у г и х п р а в п о т р е б и т е л я , в
ч а с т н о с т и , г а р а н т и й н о г о о б с л у ж и в а н и я KENWOOD, к о т о р о е о н м о ж е т п о л у ч и т ь в с о о т в е т с т в и и с
з а к о н о м о п р а в а х п о т р е б и т е л я и л и д р у ги х з а к о н о в , св я з а н н ы х с н и м .
У с л о в и я х р а н е н и я :
Т е м п е р а т у р а : о т -30°Cд о + 85°C
В л а ж н о с т ь : о т 0% д о 90%
Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable
for countries that have adopted separate waste collection systems)
Products and batteries w ith the symbol (crossed-out w heeled bin) cannot be disposed as household w aste.
Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling
these it ems and their w aste byproducts.
Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and
waste disposal w ill help conserve resources whilst preventing detrimental effects on our health and the
environment.
Notice: The sign “ Pb” below the sym bol for bat teries indicat es that this bat tery cont ains lead.

ii
• Microsoft and Window s Media are either registered trademarks or t radem arks of M icrosoft
Corporation in the United States and/ or other countries.
• “Made for iPod,” and “Made for iPhone” mean that an electronicaccessory has been designed to
connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to
meet Apple performance standards. Apple is not responsible for the operation of this device or its
compliance w ith safety and regulatory standards. Please note that the use of this accessory w ith iPod
or iPhone m ay affect w ireless perform ance.
• iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the
U.S. and other countries.
• Light ning is a trademark of Apple Inc.
• SPOTIFY and the Spotify logo are am ong the registered trademarksof Spotify AB.
• The “ AAC” logo is a t radem ark of Dolby Laboratories.
• The Bluetooth®word m ark and logos are registered trademarks ow ned by Bluetooth SIG, Inc. and any
use of such m arks by JVCKENWOOD Corporat ion is under license. Ot her t rademarks and t rade nam es
are those of their respective ow ners.
• Android is t radem ark of Google Inc.
libFLAC
Copyright (C) 2000-2009 Josh Coalson
Copyright (C) 2011-2013 Xiph.Org Foundation
Redistribution and use in source and binary forms, w ith or w ithout modification, are perm itted provided
that the follow ing condit ions are m et:
- Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaim er.
- Redistribut ions in binary form m ust reproduce t he above copyright not ice, t his list of condit ions and
the following disclaimer in the docum entation and/ or other materials provided with the distribution.
- Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to
endorse or prom ote product s derived from this softw are w ithout specific prior w ritten perm ission.
THISSOFTWARE ISPROVIDED BY THECOPYRIGHT HOLDERSAND CONTRIBUTORS “ASIS” AND ANY
EXPRESSOR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AREDISCLAIMED. IN NO EVENT SHALL
THEFOUNDATION ORCONTRIBUTORSBELIABLEFORANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAM AGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTEGOODSORSERVICES; LOSSOFUSE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVERCAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCEOR OTHERWISE) ARISING IN ANY WAY OUT OF THEUSEOF THIS
SOFTWARE, EVEN IF ADVISED OFTHE POSSIBILITY OF SUCH DAM AGE.

iii
Declaration of Conformity with regard to the REDirective 2014/53/EU
Declaration of Conformity with regard to the RoHSDirective 2011/65/EU
Manufacturer:
JVCKENWOOD Corporation
3-12, Moriya-cho, Kanagaw a-ku, Yokohama-shi, Kanagaw a, 221-0022, JAPAN
EU Representative:
JVCKENWOOD Europe B.V.
Amsterdamsew eg 37, 1422 ACUITHOORN, THENETHERLANDS
Д е к л а р а ц и я с о о т в е т с т в и я о т н о с и т е л ь н о Д и р е к т и в ы RE2014/53/EU
Д е к л а р а ц и я с о о т в е т с т в и я о т н о с и т е л ь н о Д и р е к т и в ы RoHS2011/65/EU
П р о и з в о д и т е л ь :
JVCKENWOOD Corporation
3-12, Moriya-cho, Kanagaw a-ku, Yokohama-shi, Kanagaw a, 221-0022, Я П О Н И Я
П р е д с т а в и т е л ь с т в о в EC:
JVCKENWOOD Europe B.V.
Amsterdamsew eg 37, 1422 ACUITHOORN, Н И Д Е Р Л А Н Д Ы
English
Hereby, JVCKENWOOD declares t hat the radio equipment
“ KMM-BT304/ KMM -BT204/ KMM -304Y” is in com pliance
with Directive 2014/ 53/EU.
The full text of the EU declaration of conformity is available
at the follow ing internet address:
http://www.kenwood.com/cs/ ce/ eudoc/
Français
Par la présente, JVCKENWOOD déclare que l’équipement
radio « KMM-BT304/ KMM-BT204/KMM-304Y » est
conforme à la directive 2014/ 53/ UE.
L’intégralité de la déclaration de conform ité UEest
disponible à l’adresse Internet suivante :
http://www.kenwood.com/cs/ ce/ eudoc/
Deutsch
Hierm it erklärt JVCKENWOOD, dassdas Funkgerät
“KMM-BT304/ KMM-BT204/ KMM-304Y” der Richtlinie
2014/ 53/EU entspricht.
Der volle Text der EU-Konformitätserklärung steht unter
der folgenden Internetadresse zur Verfügung:
http://www.kenwood.com/cs/ ce/ eudoc/
Nederlands
Hierbij verklaart JVCKENWOOD dat de radioapparatuur
“KMM-BT304/ KMM-BT204/ KMM-304Y” in
overeenstemming is met Richt lijn 2014/ 53/ EU.
De volledige tekst van de EU-verklaring van
overeenstemming is te vinden op het volgende
internetadres:
http://www.kenwood.com/cs/ ce/ eudoc/
Italiano
Con la presente, JVCKENWOOD dichiara che l΄ apparecchio
radio “ KMM-BT304/ KMM-BT204/ KMM-304Y” è conforme
alla Direttiva 2014/53/ UE.
Il testo integrale della dichiarazione di conformità UEè
disponibile al seguente indirizzo internet:
http://www.kenwood.com/cs/ ce/ eudoc/
Español
Por la presente, JVCKENWOOD declara que el equipo de
radio “ KMM-BT304/ KMM-BT204/ KMM-304Y” cumple la
Directiva 2014/ 53/ EU.
El texto com pleto de la declaración de conformidad con la
UEestá disponible en la siguiente dirección de internet:
http://www.kenwood.com/cs/ ce/ eudoc/
Português
Deste modo, a JVCKENWOOD declara que o equipamento
de rádio “KMM-BT304/ KMM-BT204/ KMM-304Y” está em
conformidade com a Diretiva 2014/ 53/ UE.
Otexto integral da declaração de conform idade da UE está
disponível no seguinte endereço de internet:
http://www.kenwood.com/cs/ ce/ eudoc/
Polska
Niniejszym , JVCKENWOOD deklaruje, że sprzęt radiowy
“KMM-BT304/ KMM-BT204/ KMM-304Y” jest zgodny z
dyrektyw ą 2014/53/ UE.
Pełny tekst deklaracji zgodności EU jest dostępny pod
adresem:
http://www.kenwood.com/cs/ ce/ eudoc/
Český
Společnost JVCKENWOOD tímto prohlašuje, že rádiové
zařízení “KMM-BT304/KMM-BT204/KMM-304Y” splňuje
podmínky směrnice 2014/ 53/ EU.
Plný text EU prohlášení o shodě je dostupný na následující
internetové adrese:
http://www.kenwood.com/cs/ ce/ eudoc/
Magyar
JVCKENWOOD ezennel kijelenti, hogy a „ KMM-BT304/
KMM-BT204/ KM M-304Y“ rádióberendezés megfelel a
2014/ 53/EU irányelvnek.
Az EU konformitási nyilatkozat teljes szövege az alábbi
weboldalon érhető el:
http://www.kenwood.com/cs/ ce/ eudoc/

iv
Svenska
Härm ed försäkrar JVCKENWOOD att
radioutrustningen “ KMM-BT304/ KMM-BT204/
KMM-304Y” är i enlighet med direktiv
2014/53/EU.
Den fullständiga texten av EU-försäkran
om överensstäm melse finns på följande
Internetadress:
http://www.kenwood.com/cs/ ce/ eudoc/
Suomi
JVCKENWOOD julistaa täten, että radiolaite
“KMM-BT304/ KMM-BT204/ KMM-304Y” on
direktiivin 2014/ 53/EU mukainen.
EU-vaatim ustenm ukaisuusvakuut usvaatim us
löytyy kokonaisuudessaan seuraavasta internet-
osoitteesta:
http://www.kenwood.com/cs/ ce/ eudoc/
Slovensko
Stem JVCKENWOOD izjavlja, da je radijska oprema
»KMM-BT304/KMM-BT204/ KMM-304Y« v skladu z
Direktivo 2014/53/ EU.
Celotno besedilo direktive EU o skladnosti je
dostopno na tem spletnem naslovu:
http://www.kenwood.com/cs/ ce/ eudoc/
Slovensky
Spoločnosť JVCKENWOOD týmto vyhlasuje, že
rádiové zariadenie „ KMM-BT304/ KMM-BT204/
KMM-304Y“ vyhovuje smernici 2014/53/EÚ.
Celý text EÚ vyhlásenia o zhode nájdete na
nasledovnej internetovej adrese:
http://www.kenwood.com/cs/ ce/ eudoc/
Dansk
Herved erklærer JVCKENWOOD, at radioudstyret
“KMM-BT304/ KMM-BT204/ KMM-304Y” er i
overensstem melse med Direktiv 2014/53/ EU.
EU-overensstem melseserklæringens fulde ordlyd
er tilgængelig på følgende internetadresse:
http://www.kenwood.com/cs/ ce/ eudoc/
Ελληνικά
Με το παρόν, η JVCKENWOOD δηλώνει ότι ο
ραδιοεξοπλισμός «KMM -BT304/ KMM -BT204/
KMM-304Y» συμμορφώνεται με την Οδηγία
2014/53/ΕΕ.
Το πλήρες κείμενο τη ς δήλω σης συμμόρφ ω σης
της ΕΕ είναι διαθέσιμο στην ακόλουθη διεύθυνση
στο διαδίκτυο:
http://www.kenwood.com/cs/ ce/ eudoc/
Eesti
Käesolevaga JVCKENWOOD kinnitab, et
„KMM-BT304/ KMM-BT204/ KMM-304Y“
raadiovarustus on vastavuses direktiiviga
2014/53/EL.
ELi vastavusdeklaratsiooni terviktekst on
kättesaadav järgmisel internetiaadressil:
http://www.kenwood.com/cs/ ce/ eudoc/
Latviešu
JVCKENWOOD ar šo deklarē, ka radio aparatūra
„KMM-BT304/ KMM-BT204/ KMM-304Y” atbilst
direkt īvas 2014/ 53/ ESprasībām .
Pilns ESatbilstības deklarācijas teksts ir pieejam s
šādā tīmekļa adresē:
http://www.kenwood.com/cs/ ce/ eudoc/
Lietuviškai
Šiuo JVCKENWOOD pažymi, kad radijo įranga
„KMM-BT304/ KMM-BT204/ KMM-304Y“ atitinka
2014/ 53/ EB direkt yvos reikalavim us.
Visą EB direktyvos atit ikt ies deklaracijos tekstą
galite rasti šiuo internetiniu adresu:
http://www.kenwood.com/cs/ ce/ eudoc/
Malti
B’dan, JVCKENWOOD jiddikjara li t-t agħmir
tar-radju “ KMM-BT304/ KMM-BT204/ KMM-304Y”
huw a konform i mad-Direttiva 2014/ 53/UE.
It-test kollu tad-dikjarazzjoni ta’ konform ità huw a
disponibbli fl-indirizz intranet li ġej:
http://www.kenwood.com/cs/ ce/ eudoc/
HRVATSKI / SRPSKI JEZIK
JVCKENWOOD ovim izjavljuje da je radio oprem a
“KMM-BT304/ KMM-BT204/ KMM-304Y” u skladu s
Direktivom 2014/ 53/ EU.
Cjeloviti tekst deklaracije Europske unije o
usklađenosti dostupan je na sljedećoj internet
adresi:
http://www.kenwood.com/cs/ ce/ eudoc/
ROMÂNĂ
Prin prezenta, JVCKENWOOD declară că
echipamentul radio “KMM-BT304/ KMM-BT204/
KMM-304Y” este în conformitate cu Directiva
2014/53/UE.
Textul integral al declarației de conformitate UE
este disponibil la urm atoarea adresă de internet:
http://www.kenwood.com/cs/ ce/ eudoc/
Б Ъ Л Г А Р С К И
С н а с т о я щ о т о JVCKENWOOD д е к л а р и р а ,
ч е р а д и о о б о р у д в а н е т о н а “KMM-BT304/
KMM-BT204/ KMM-304Y” е в с ъ о т в е т с т в и е с
Д и р е к т и в а 2014/ 53/ Е С .
П ъ л н и я т т е к с т н а Е С д е к л а р а ц и я т а з а
с ъ о т в е т с т в и е е д о с т ъ п е н н а с л е д н и я и н т е р н е т
а д р е с :
http://www.kenwood.com/cs/ ce/ eudoc/
Turkish
Burada, JVCKENWOOD “ KMM-BT304/KMM-BT204/
KMM-304Y” radyo ekipmanının 2014/53/ AB
Direktifine uygun olduğunu bildirir.
AB uyum luluk deklarasyonunun tam m etni
aşağıdaki internet adresinde mevcuttur.
http://www.kenwood.com/cs/ ce/ eudoc/
Р у с с к и й
JVCKENWOOD н а с т о я щ и м з а я в л я е т , ч т о
р а д и о о б о р у д о в а н и е «KMM-BT304/
KMM-BT204/ KMM-304Y» с о о т в е т с т в у е т
Д и р е к т и в е 2014/ 53/ EU.
П о л н ы й т е к ст д е к л а р а ц и и с о о т в е т с т в и я
Е С д о с т у п е н п о сл е д у ю щ е м у а д р е с у в с е т и
И н т е р н е т :
http://www.kenwood.com/cs/ ce/ eudoc/
У к р а їн с ь к а
Т а к и м ч и н о м , к о м п а н ія JVCKENWOOD з а я в л я є ,
щ о р а д іо о б л а д н а н н я «KMM-BT304/KMM-BT204/
KMM-304Y» в ід п о в ід а є Д и р е к т и в і 2014/ 53/ EU.
П о в н и й т е к с т д е к л а р а ц ії п р о в ід п о в ід н іс т ь Є С
м о ж н а з н а й т и в Ін т е р н е т і з а т а к о ю а д р е с о ю :
http://www.kenwood.com/cs/ ce/ eudoc/

2ENGLISH
BEFORE USE
IMPORTANT
• To ensure proper use, please read t hrough this m anual before using this product. It is especially im portant t hat you read and observe
Warning and Caution in thismanual.
• Please keep the manual in a safe and accessible place for future reference.
WARNING
• Do not operate any function that takesyour attention away from safe driving.
Caution
Volume setting:
•
Adjust the volum e so that you can hear soundsoutside the car to prevent accidents.
• Low er the volum e before playing digital sources to avoid damaging the speakersby the sudden increase of the output level.
General:
•
Avoid using the external device if it m ight hinder safe driving.
• Make sure all im portant data has been backed up. We shall bear no responsibility for any lossof recorded data.
• Never put or leave any m etallic objects (such as coins or m etal tools) inside the unit to prevent a short circuit .
• USB rating isindicated on the main unit. To view , detach the faceplate. ( 3)
• Depending on the types of cars, the antenna will autom atically extend w hen you turn on the unit with the antenna control w ire connected
( 28) . Turn off the unit or change the source to STANDBY w hen parking at a low ceiling area.
How to read this manual
• Operations are explained m ainly using buttonson the faceplate of .
• English indicationsare used for the purpose of explanation. You can select the display language from the [FUNCTION] menu. ( 5)
• [XX] indicates the selected item s.
• ( XX) indicates references are available on the stated page.
CONTENTS
BEFORE USE 2
BASICS 3
GETTING STARTED 4
1 Select the display language
and cancel the demonstration
2 Set the clock and date
3 Set the initial settings
RADIO 6
USB/iPod/ ANDROID 8
AUX 10
Spotify 11
BLUETOOTH® 12
AUDIO SETTINGS 19
DISPLAY SETTINGS 23
TROUBLESHOOTING 24
INSTALLATION/
CONNECTION 26
REFERENCES 30
Maintenance
More information
SPECIFICATIONS 32

ENGLISH 3
BASICS
To On the faceplate
Turn on the power Press .
• Press and hold t o turn off the power.
Adjust the volume Turn the volume knob.
Select a source Press repeatedly.
Change the display information Press DISP repeat edly.
( 31)
Faceplate
How to reset
Attach
Detach
Volume
knob
Detach
button
For / : Flashes
when the unit enters searching status.
For :
Lights up w hen
Bluetooth
connection is
established.
( 12)
Reset the unit w ithin 5 seconds
after detaching the faceplate.

4ENGLISH
Set the clock and date
1 Press the volume knob to enter
[FUNCTION] .
2 Turn the volume knob to select [CLOCK] , then press the knob.
To adjust the clock
3 Turn the volume knob to select
[CLOCK ADJUST] , then press the knob.
4 Turn the volume knob to make the settings, then press the knob.
Hour Minute
5 Turn the volume knob to select [CLOCK FORM AT] , then press the knob.
6 Turn the volume knob to select [12H] or [24H] , then press the knob.
To set the date
7 Turn the volume knob to select
[DATEFORMAT] , then press the knob.
8 Turn the volume knob to select [DD/MM/YY] or [MM/DD/YY] , then press
the knob.
9 Turn the volume knob to select [DATESET] , then press the knob.
10 Turn the volume knob to make the settings, then press the knob.
Day Month Year or Month Day Year
11 Press and hold to exit.
To return to the previous setting item, press .
Set the initial settings
1 Press repeatedly to enter STANDBY.
2 Press the volume knob to enter [FUNCTION] .
3 Turn the volume knob to select an item ( 5) , then press the
knob.
4 Repeat step 3until the desired item is selected or activated.
5 Press and hold to exit.
To return to the previous setting item, press .
2
3
Select the display language and cancel the demonstration
When you turn on the power for the first time (or
[FACTORY RESET] is set to
[YES] , 5 ), the display shows: “SEL LANGUAGE” “PRESS” “VOLUME
KNOB”
1 Turn the volume knob to select
[ENG] (English), [RUS] (Russian) or
[SPA] (Spanish), then press the knob.
[ENG] is selected for t he init ial setup.
Then, the display show s: “CANCEL DEMO” “PRESS” “VOLUME
KNOB”.
2 Press the volume knob.
[YES] is selected for t he init ial setup.
3 Press the volume knob again.
“DEMO OFF” appears.
Then, the display shows the selected crossover type:
“2-WAY X ’ OVER” or “3-WAY X ’ OVER”
• To change t he crossover type, see “Change the crossover type”.
( 6)
GETTING STARTED
1

ENGLISH 5
Default: XX
AUDIO CONTROL
SWITCH
PREOUT*
(For )
REAR / SUB-W : Selects w hether rear speakers or a subwoofer are
connected to the line out terminals on the rear (through an external
amplifier).
( 29)
DISPLAY
EASY MENU
(For / )
When entering
[FUNCTION] ...
ON :ZONE1 illumination changes to w hit e color.;
OFF :ZONE1 illumination remains as [COLOR SELECT] color. ( 23)
• ZONE 2 illuminat ion changes t o light blue color w hen you ent er
[FUNCTION] , irregardless of t he [EASY MENU] setting.
• Refer to the illustration on page 23 for zone identification.
TUNER SETTING
PRESET TYPE NORMAL
:Memorizes one station for each preset button in each band
(FM1/ FM2/FM3/MW/ LW).;
MIX :Memorizes one station for each preset
button, regardless of the selected band.
SYSTEM
KEY BEEP* ON
:Act ivates the keypress tone.; OFF :Deactivates.
SOURCESELECT
SPOTIFY SRC ON
:Enables SPOTIFY in source selection.; OFF :Disables. ( 11)
BUILT-IN AUX ON
:Enables AUX in source selection.; OFF :Disables. ( 10)
P-OFF WAIT
Applicable only when the demonstration mode is turned off.
Sets the duration when the unit w ill automatically turn off (while in
standby mode) to save the battery.
20M : 20minutes; 40M : 40minutes; 60M : 60minutes; – – – :Cancels
GETTING STARTED
F/W UPDATE
UPDATESYSTEM
F/W UP xxxx YES
:Starts upgrading t he firmware.; NO :Cancels (upgrading is not
activated).
For details on how to update the firmware, visit
< www.kenwood.com/cs/ce/ > .
FACTORY RESET YES :Reset s the sett ings t o default (except t he stored stat ion).;
NO :Cancels
CLOCK
CLOCK DISPLAY ON
:The clock time is shown on the display even w hen the unit is
turned off.;
OFF :Cancels.
ENGLISH
Select the display language for [FUNCTION] menu and music
information if applicable.
By default,
[ENGLISH] is selected.
РУССКИЙ
ESPANOL
* Not applicable if 3-way crossover is selected.

6ENGLISH
Search for a station
1 Press repeatedly to select RADIO.
2 Press repeatedly to select FM1/ FM2/ FM3/ MW/ LW.
3 Press S/Tto search for a station.
• To change the searching method for S/T: Press
repeatedly.
AUTO1 : Automatically search for a station.
AUTO2 : Search for a preset station.
MANUAL : Manually search for a station.
• To store a station: Press and hold one of the number buttons (1to6).
• To select a stored station: Press one of the number buttons (1to6).
Other settings
1 Press the volume knob to enter
[FUNCTION] .
2 Turn the volume knob to select an item ( 7) , then press the
knob.
3 Repeat step 2until the desired item is selected/activated or follow
the instructions stated on the selected item.
4 Press and hold to exit.
To return to the previous setting item, press .
RADIO
Change the crossover type
1 Press repeatedly to enter STANDBY.
2 Press and hold number buttons 4and 5to enter crossover select.
The current crossover t ype appears.
3 Turn the volume knob to select “2WAY” or “3WAY”, then press the
knob.
4 Turn the volume knob to select “YES” or “NO”, then press the knob.
The selected crossover type appears.
• To cancel, press and hold .
• To adjust the selected crossover settings,
( 20, 21) .
Caution
Select a crossover type according to how the speakers are connected.
( 28, 29)
If you select a wrong type:
• The speakers may damage.
• The output sound level may be extremely high or low.
GETTING STARTED

ENGLISH 7
Default: XX
TUNER SETTING
LOCAL SEEK ON
: Searches only stations w it h good reception. ; OFF : Cancels.
• Settings made are applicable only to the selected source/ station. Once
you change the source/ station, you need to m ake the settings again.
AUTO
MEMORY
YES :Aut omatically starts mem orizing 6 stat ions with good reception.;
NO :Cancels.
• Selectable only if [NORMAL] is selected for [PRESET TYPE] . ( 5)
MONO SET ON
:Improves the FM reception, but the stereo effect may be lost.;
OFF :Cancels.
NEWSSET ON : The unit w ill temporarily switch to NewsProgramme if available. ;
OFF :Cancels.
REGIONAL ON : Switches to another station only in the specific region using the “ AF”
control.;
OFF :Cancels.
AF SET ON : Automatically searches for another station broadcasting the same
program in the same Radio Data System network with better reception
when the current reception is poor.;
OFF :Cancels.
TI ON :Allow s the unit to temporarily sw itch to TrafficInformation if available
(“ TI” light s up).;
OFF :Cancels.
PTY SEARCH 1 Turn the volume knob to select the available Program Type (see the
follow ing), t hen press the knob.
2 Turn the volume knob to select the PTY language ( ENGLISH / FRENCH /
GERMAN ), t hen press t he knob.
3 Press S / T to start searching.
CLOCK
TIMESYNC ON
:Synchronizes the unit’s time to the Radio Data System station time.;
OFF :Cancels.
Available Program Type for [PTY SEARCH]
SPEECH : NEWS , AFFAIRS , INFO (information), SPORT , EDUCATE , DRAMA ,
CULTURE , SCIENCE , VARIED , WEATHER , FINANCE , CHILDREN , SOCIAL ,
RELIGION , PHONEIN , TRAVEL , LEISURE , DOCUMENT
MUSIC
: POP M (music), ROCK M (music), EASY M (music), LIGHT M (music),
CLASSICS , OTHER M (music), JAZZ , COUNTRY , NATION M (music),
OLDIES , FOLK M (music)
The unit will search for the Program Type categorized under [SPEECH] or
[MUSIC] if selected.
•
[LOCAL SEEK] / [MONO SET] / [NEWSSET] / [REGIONAL] / [AF SET] / [TI] / [PTY SEARCH] is
selectable only when the band is FM1/FM2/FM3.
• If the volum e is adjusted during reception of traffic information or news
bulletin, the adjusted volum e is memorized automatically. It will be
applied the next time t raffic information or news bulletin is turned on.
RADIO

8ENGLISH
USB/iPod/ANDROID
Start playback
The source changes aut omatically and playback
starts.
*1
KCA-iP102 : 30-pin type, KCA-iP103 : Lightning type
*2
Do not leave the cable inside the car w hen not using.
To On the faceplate
Playback/pause Press .
Reverse/Fast-forward*4Press and hold S/ T.
Select a file Press S/T.
Select a folder*5Press / .
Repeat play*6Press repeatedly.
FILEREPEAT / FOLDER REPEAT / ALL REPEAT : MP3/WMA/ AAC/WAV/FLAC file
FILEREPEAT / FOLDER REPEAT / REPEAT OFF : iPod or ANDROID
Random play*6Press repeatedly.
FOLDER RANDOM / RANDOM OFF : MP3/ WMA/AAC/WAV/ FLAC file, iPod or
ANDROID
Press and hold to select
ALL RANDOM .
* 3
When connecting an Android device, “Press[VIEW] to install KENWOOD MUSICPLAYAPP” is shown. Follow the instructions
to install the application. You can also install the latest version of KENWOOD MUSICPLAY application on your Android device
before connecting. For more information, visit < www.kenwood.com/cs/ce/> .
*4
For ANDROID: Applicable only when [BROWSE MODE] is selected. ( 9)
*5
This does not w ork for iPod/ ANDROID.
*6
For iPod/ ANDROID: Applicable only when [MODEOFF] / [BROWSE MODE] is selected. ( 9)
USB input terminal
CA-U1EX(max.: 500mA)
(optional accessory)
USB cable
*2
(commercially available)
KCA-iP102/ KCA-iP103
(optional accessory)
*1
or accessory of the iPod/
iPhone
*2
USB
iPod/iPhone
ANDROID*3

ENGLISH 9
USB/iPod/ANDROID
Select control mode
While in iPod USB source, press 5repeatedly.
MODEON : Cont rol iPod using the iPod it self. However, you can still play/
pause, file skip, fast-forward or reverse from this unit.
MODEOFF : Control iPod from this unit.
While in ANDROID source, press 5 repeatedly.
BROWSE MODE : Control Android device from this unit via KENWOOD
MUSIC PLAY application installed in the Android device.
HAND MODE : Cont rol Android device using t he Android device itself via
other media player applications installed in t he Android
device. How ever, you can still play/pause and file skip from
this unit.
Select music drive
While in USB source, press 5 repeatedly.
Stored songs in the following drive will be played back.
• Selected internal or external m emory of a smartphone (Mass Storage
Class).
• Selected drive of a mult iple drives device.
Listen to TuneIn Radio/TuneIn Radio Pro/Aupeo
While listening t o TuneIn Radio, TuneIn Radio Pro or Aupeo, connect the
iPod/ iPhone to the USB input terminal of the unit.
• The unit will output the sound from these applications.
Select a file from a folder/list
For iPod/ANDROID, applicable only when [MODEOFF] / [BROWSE MODE] is
selected.
1 Press .
2 Turn the volume knob to select a folder/list, then press the knob.
3 Turn the volume knob to select a file, then press the knob.
Quick Search (applicable only for USB and ANDROID source)
If you have many files, you can search through them quickly.
Turn the volume knob quickly to browse through the list quickly.
Skip Search
(applicable only for iPod USB and ANDROID source)
Press S/Tto search at a preset skip search ratio.
( 10, [SKIP SEARCH])
• Pressing and holding S/Tsearches at a 10 % ratio.
Alphabet search (applicable only for iPod USB and ANDROID source)
You can search for a file according t o the first character.
For iPod USB source
1 Turn the volume knob quickly to enter character search.
2 Turn the volume knob to select the character.
• Select “
*” to search for a character other than AtoZ, 0to9.
3 Press S/Tto move to the entry position.
• You can enter up to 3characters.
4 Press the volume knob to start searching.
For ANDROID source
1 Press / to enter character search.
2 Turn the volume knob to select the character.
^A^: Upper case letters (A to Z)
_A_: Lower case letters (a to z)
-0-: Numbers (0 to 9)
***: Character other than AtoZ, 0to9
3 Press the volume knob to start searching.
• To return t o the root folder/first file/top menu, press 5.
(Not applicable for
BT AUDIO source.)
• To return t o the previous setting item, press .
• To cancel, press and hold .

10 ENGLISH
USB/iPod/ANDROID
Settings to use KENWOOD Remote application
KENWOOD Remote application is designed to control the KENWOOD car
receiver’s operations from the iPhone/ iPod (via USB input t erminal).
Preparation:
Install the latest version of KENWOOD Remote application on your device
before connecting. For m ore information, visit
<www.kenwood.com/cs/ce/>.
For / , you can also make the settings in the
same w ay as connection via Bluetooth.
( 18)
Other settings
1 Press the volume knob to enter
[FUNCTION] .
2 Turn the volume knob to select an item (see the following table),
then press the knob.
3 Repeat step 2until the desired item is selected or activated.
4 Press and hold to exit.
To return to the previous setting item, press .
Default:
XX
USB
MUSICDRIVE DRIVECHANGE
:The next drive ( [DRIVE1] to [DRIVE4] ) is selected
automatically and playback starts.
Repeat steps
1 to 3 to select the following drives.
SKIP SEARCH 0.5% / 1% / 5% / 10% : While listening to iPod USB or ANDROID source, selects
the skip search ratio over the total files.
Preparation:
Select
[ON] for [BUILT-IN AUX] for [SOURCESELECT] . ( 5)
Start listening
1 Connect a portable audio player (commercially available).
2 Press repeatedly to select AUX.
3 Turn on the portable audio player and start playback.
Set the AUX name
While listening to a portable audio player connected to the unit...
1 Press the volume knob to enter
[FUNCTION] .
2 Turn the volume knob to select [SYSTEM] , then press the knob.
3 Turn the volume knob to select [AUX NAME SET] , then press the knob.
4 Turn the volume knob to select an item, then press the knob.
AUX (default)/ DVD / PORTABLE / GAME / VIDEO / TV
5 Press and hold to exit.
To return to the previous setting item, press .
AUX
Auxiliary input jack
Portable audio
player
3.5mm stereo mini plug with “L” shaped connector
(commercially available)

ENGLISH 11
Spotify
Preparation:
Install t he latest version of the Spotify application on your device (iPhone/
iPod touch), then create an account and log in to Spot ify.
• Select
[ON] for [SPOTIFY SRC] in [SOURCESELECT] . ( 5)
Start listening
1 Open the Spotify application on your device.
2 Connect your device to the USB input terminal.
3 Press repeatedly to select SPOTIFY.
Broadcast starts aut omatically.
To On the faceplate
Playback/pause Press .
Skip a track Press S*3/T.
Thumbs up or thumbs down*4Press / .
Start radio Press and hold 5.
Repeat play* 5Press repeatedly.
REPEAT ALL / REPEAT ONE*
3/
REPEAT OFF
Random play* 5Press repeatedly.*3
SHUFFLEON/ SHUFFLE OFF
*1
KCA-iP102 : 30-pin type, KCA-iP103 : Lightning type
*2
Do not leave the cable inside the car w hen not using.
*3
Available for prem ium account users only.
*4
This feature is available for t racks in Radio only. If t hum bs dow n is selected, the current
track is skipped.
*5
Available for t racks in Playlists only.
Save favorite song information
While listening to the Radio on Spotify...
Press and hold the volume knob.
“SAVED” appears and the information is stored to “Your Music” or “Your
Library” on your Spot ify account.
To unsave, repeat the same procedure.
“REMOVED” appears and t he information is removed from “Your Music”
or “Your Library” on your Spotify account.
Search for a song or station
1 Press .
2 Turn the volume knob to select a list type, then press the knob.
The list types displayed differ depending on t he information sent
from Spotify.
3 Turn the volume knob to select the desired song or station.
4 Press the volume knob to confirm.
You can browse through t he list quickly by turning the volum e knob
quickly.
To cancel, press and hold .
USB input term inal KCA-iP102/ KCA-iP103 (optional accessory)
*1
or accessory of the iPod/iPhone
*2

12 ENGLISH
BLUETOOTH — Connection
Supported Bluetooth profiles
– Hands-Free Profile (HFP)
– Advanced Audio Distribut ion Profile (A2DP)
– Audio/ Video Rem ote Cont rol Profile (AVRCP)
– Serial Port Profile (SPP)
– Phonebook Access Profile (PBAP)
Supported Bluetooth codecs
– Sub Band Codec (SBC)
– Advanced Audio Coding (AAC)
Connect the microphone
BLUETOOTH® (for / )
Adjust the
microphone angle Secure using cord clamps (not
supplied) if necessary.
Microphone
input jack
Microphone
(supplied)
Rear panel
Pair and connect a Bluetooth device for the first time
1 Press to turn on the unit.
2 Search and select this unit model name (KMM -BT3* * /KMM-BT2* * ) on the Bluetooth
device.
“PAIRING” “PASS XXXXXX” Device name “PRESS” “VOLUME KNOB” appears on
the display.
• For some Bluetoot h devices, you may need to enter the Personal Ident ification
Number (PIN) code immediately after searching.
3 Press the volume knob to start pairing.
“PAIRING OK” appears when pairing is completed.
Once pairing is completed, Bluetooth connection is established autom atically.
• : “BT1” and/ or “BT2” indicator on the faceplate lights up.
• : “BT1” and/or “BT2” on t he display window lights up.
• This unit supports Secure Simple Pairing (SSP).
• Up to five devices can be registered (paired) in total.
• Once the pairing is completed, the Bluetoot h device will rem ain registered in the unit
even if you reset the unit. To delete the paired device,
16, [DEVICEDELETE] .
• A m aximum of two Bluetooth phones and one Bluetooth audio device can be connected
at any time.
However, while in BT AUDIO source, you can connect to five Bluetoot h audio devices and
switch between these five devices.
( 17)
• Some Bluetoot h devices may not automatically connect to the unit after pairing. Connect
the device to t he unit manually.
• Refer to the instruction m anual of the Bluetooth device for more information.
*
For the location of the m icrophone input jack, refer to page 29.

ENGLISH 13
BLUETOOTH® (for / )
Auto Pairing
When you connect iPhone/iPod touch/Android device to the USB input
terminal, pairing request (via Bluetooth) is automat ically activated.
Press the volume knob to pair once you have confirmed the device
name.
Automatic pairing request is activated only if:
– Bluetooth function of the connected device is turned on.
–
[AUTO PAIRING] is set to [ON] . ( 16)
– KENWOOD MUSIC PLAY application is installed on the Android device
( 8) and [BROWSE MODE] is selected. ( 9)
BLUETOOTH — Mobile phone
Receive a call
When there is an incoming call:
• : ZONE 2 illuminates in green color and flashes.
• The unit answers the call automatically if
[AUTO ANSWER] is set to a
selected time.
( 14)
During a call:
• : ZONE 1 illuminates according to t he settings m ade for
[DISPLAY] ( 23) and ZONE2 illum inates in green color.
• If you turn off the unit or detach t he faceplate, the Bluetooth
connection is disconnected.
The follow ing operations may differ or not available depending on the
connected phone.
To On the faceplate
First incoming call...
Answer a call Press or the volume knob or one of
the number buttons (1to 6).
Reject a call Press .
End a call Press .

14 ENGLISH
BLUETOOTH® (for / )
To On the faceplate
While talking on the first incom ing call...
Answer another incoming
call and hold the current
call
Press .
Reject another incoming
call
Press .
While having t wo active calls...
End current call and
activate held call
Press .
Swap between the
current call and held call
Press .
Adjust the phone volume
[00] to [35] (Default: [15] )
Turn the volume knob during a call.
• This adjustment will not affect the
volum e of the other sources.
Switch between hands-free
and private talk modes
Press during a call.
• Operations m ay vary according t o the
connected Bluetooth device.
Improve the voice quality
While talking on the phone...
1 Press the volume knob to enter
[FUNCTION] .
2 Turn the volume knob to select an item (see the following table),
then press the knob.
3 Repeat step 2until the desired item is selected or activated.
4 Press and hold to exit.
To return to the previous setting item, press .
Default: XX
MICGAIN – 10 to + 10 ( – 4 ):The sensitivity of the microphone increases asthe
number increased.
NR LEVEL – 5 to + 5 ( 0 ):Adjust the noise reduction level until the least noise is
being heard during a phone conversation.
ECHOCANCEL – 5 to + 5 ( 0 ):Adjust the echo cancellation delay time until the least
echo is being heard during a phone conversation.
Make the settings for receiving a call
1 Press to enter Bluetooth mode.
2 Turn the volume knob to select an item (see the following table),
then press the knob.
3 Repeat step 2until the desired item is selected or activated.
4 Press and hold to exit.
To return to the previous setting item, press .
Default:
XX
SETTINGS
AUTO ANSWER 1
to 30 :The unit answers incoming call automatically in the selected
time (in seconds).;
OFF :Cancels.
BATT/SIGNAL*
(For )
AUTO :Shows the strength of the battery and signal w hen the unit
detect s a Bluetoot h device and the Bluet oot h device is connected.;
OFF :Cancels.
* Functionality depends on the type of the phone used.

ENGLISH 15
PHONEBOOK (Applicable only if the phone supports PBAP.)
1 Turn the volum e knob quickly to enter alphabet search mode (if the
phonebook contains m any cont acts).
The first menu (ABCDEFGHIJK) appears.
• To go to the other menu (LMNOPQRSTUV or WXYZ1
* ), press
/ .
• To select the desired first letter, turn the volume knob or press
S/T , t hen press the knob.
Select “1” to search with numbers and select “
* ” to search with
symbols.
2 Turn the volume knob to select a name, then press the knob.
3 Turn the volume knob to select a phone number, then press the knob
to call.
• The phonebook of the connected phone is automatically transferred to
the unit when pairing.
• Contacts are categorized as: HOME, OFFICE, MOBILE, OTHER, GENERAL or
HM (home), OF (office), MO(mobile), OT(other), GE(general)
• This unit can display only non-accent letters. (Accent letters such as “ Ú”
is show n as “ U”.)
NUM BER DIAL 1 Turn the volume knob to select a number (0 to 9) or character
(, #, + ).
2 Press S/T to move the entry position.
Repeat steps
1 and 2 until you finish entering the phone number.
3 Pressthe volume knob to call.
VOICE Speak the name of the contact you w ant to call or the voice command
to control the phone functions.
( 16, Make a call using voice
recognition)
BATT LOW
/ MID / FULL
*
:Shows the strength of the battery.
NO SIGNAL / LOW / MID / MAX
*
:Shows the strength of the current received signal.
* Functionality depends on the type of the phone used.
Make a call
You can m ake a call from the call history, phonebook, or dialing the
num ber. Call by voice is also possible if your m obile phone has the
feature.
1 Press to enter Bluetooth mode.
“(First device name)” appears.
• If two Bluetoot h phones are connected, press again to switch to
another phone.
“(Second device name)” appears.
2 Turn the volume knob to select an item (see the following table),
then press the knob.
3 Repeat step 2until the desired item is selected/ activated or follow
the instructions stated on the selected item.
4 Press and hold to exit.
To return to the previous setting item, press .
CALL HISTORY (Applicable only if the phone supports PBAP.)
1 Pressthe volume knob to select a name or a phone number.
• : “INCOMING”, “OUTGOING”, or “MISSED” isshown
on the lower part of the display to indicate the previous call status.
• : “I” indicates call received, “O” indicates call made,
“ M” indicates call missed.
• Press
DISP to change the display category (NUMBERor NAME).
• “NO DATA” appears if there is no recorded call history.
2 Pressthe volume knob to call.
BLUETOOTH® (for / )

16 ENGLISH
Make a call using voice recognition
1 Press and hold to activate the voice recognition of the
connected phone.
2 Speak the name of the contact you want to call or the voice
command to control the phone functions.
• Supported Voice Recognition features vary for each phone. Refer to the
instruction manual of the connected phone for details.
• This unit also supports the intelligent personal assistant funct ion of
iPhone.
Settings in memory
Store a contact in memory
You can store up to 6 cont acts into the number buttons (1to 6).
1 Press to enter Bluetooth mode.
2 Turn the volume knob to select [CALL HISTORY] , [PHONEBOOK] , or
[NUM BER DIAL] , then press the knob.
3 Turn the volume knob to select a contact or enter a phone number.
If a contact is selected, press the volume knob to show the phone
num ber.
4 Press and hold one of the number buttons (1to 6).
“STORED” appears when the cont act is stored.
To erase a cont act from the preset memory, select
[NUM BER DIAL] in step 2
and store a blank num ber.
Make a call from memory
1 Press to enter Bluetooth mode.
2 Press one of the number buttons (1to 6).
3 Press the volume knob to call.
“NO MEMORY” appears if there is no cont acts stored.
Other settings
1 Press the volume knob to enter
[FUNCTION] .
2 Turn the volume knob to select an item (see the following table),
then press the knob.
3 Repeat step 2until the desired item is selected/activated or follow
the instructions stated on the selected item.
4 Press and hold to exit.
To return to the previous setting item, press .
Default:
XX
BT MODE
PHONESELECT
Selectsthe phone or audio device to connect or disconnect.
“
* ” appears in front of the device nam e w hen connected.
“” appears in front of the current playback audio device.
• You can only connect a m axim um of two Bluet ooth phones and one
Bluetooth audio device at any time.
AUDIO SELECT
DEVICEDELETE
1 Turn the volum e knob to select a device to delete, then press the knob.
2 Turn the volum e knob to select [YES] or [NO] , t hen press the knob.
PIN CODEEDIT
(0000)
Changes the PIN code (up to 6 digits).
1 Turn the volum e knob to select a number.
2 Press S / T to move the entry position.
Repeat steps
1 and 2 until you finish entering the PIN code.
3 Pressthe volume knob to confirm.
RECONNECT ON :The unit automatically reconnect when the last connected Bluetooth
device is w it hin range.;
OFF :Cancels.
AUTO PAIRING ON :The unit automatically pair supported Bluetooth device (iPhone/
iPod touch/ Android device) when it is connected through USB input
terminal.Depending on the operating system of the connected device,
this function m ay not w ork. ;
OFF :Cancels.
INITIALIZE YES :Init ializes all the Bluet oot h sett ings (including stored pairing,
phonebook, and etc.).;
NO :Cancels.
BLUETOOTH® (for / )