
4
RD-M515, LS-M515
SAFETY INSTRUCTIONS
CAUTION
To reduce the risk of electrical shocks, fire, etc.:
Excessive sound pressure from earphones or headphones can cause hearing loss.
The button in any position does not disconnect the means line.
Disconnect the mains plug to shut the power off completely (the STANDBY lamp goes off).
The MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain
readily operable.
- When the system is on standby, the STANDBY lamp lights red.
- When the system is turned on, the STANDBY lamp goes off.
The power can be remove controlled.
IMPORTANT FOR LASER PRODUCTS
1.
CLASS 1 LASER PRODUCT
It means that there is no danger of hazardous radiation outside the product.
2.
CAUTION: Do not open the top cover or cabinet. There are no user serviceable parts inside the unit; leave
all servicing to qualified service personnel.
CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical
instruments.
3.
4.
REPRODUCTION OF LABEL: CAUTION LABEL, PLACED INSIDE THE UNIT.
- Select a place which is level, dry and neither too hot nor too cold between 5 C and 35 C.
- Do not install the System in a place subject to vibrations.
- Do not put heavy objects on the System.
- Do not insert any metallic objects, such as wires, hairpins, coins, etc. into the System.
- There are no user-serviceable parts inside. If and thing goes wrong, unplug the power cord and consult
your dealer.
- Do not place any naked flame sources, such as lighted candles, on the apparatus.
- Do not expose this apparatus to rain, moisture, dripping or splashing and that no objects filled witch
liquids, such as vases, shall be placed on the apparatus.
- Do not expose the System to direct sunlight or place it near a heating device.
Location: Back panel
!
- When you go away for an extended period of time, remove the plug from the wall outlet.
- When unplugging the System from the wall outlet, always pull the plug, not the power cord.
- Do not handle the power cord with we hands.
- Disconnect the power cord before cleaning the System or moving the System.
- Do not alter, twist or pull the power cord, or put anything heavy on it, which may cause fire, electric shock,
or other accidents.
Notes on the power cord
Notes on installation
To prevent malfunction or damage to the System
Do not remove screws, covers or cabinet.