Kerio Operator Box 1000 Series User manual

Kerio Operator Box
1000/3000 Series

Kerio Operator Box 1000/3000 Series
2
1 Purpose
This document is a quick guide for safely installing and implementing Kerio Operator Box 1000
and 3000 Series PBX appliances.
2 General safety instructions
•Theapplianceshouldbeplacedonaatsurfaceorsecurelymountedhorizontallyinrack
enclosure.
•Donotattempttoopenordisassembletheapplianceforanyreason.
•Strictlyfollowtheinstallationinstructions(seesection4).
•Donotplacethedevicenearaheatsource.
•Placetheapplianceinaventilatedspace,makingsurethattheappliancefansandventsare
unobstructedatalltimes.
•Donotexposetheappliancetoliquidsofanykind.Intheeventofliquidintrusion,unplug
the appliance immediately.
•Verifythatthevoltageandfrequencyofthepowersocketmatchesthevaluesprintedon
thepoweradapterbeforepluggingintheappliance.Useonlythepoweradaptersupplied
withtheappliance.
•Donotplaceanyitemsontopofthepowercable.Keepthepowercableawayfromwalk-
waysorotherareaswhereitcouldposeatrippinghazard.
3 Device Description
Kerio Operator Box types:
•KerioOperator1000Series—Sub1Utablemountableappliance(seegure1).
•KerioOperator3000Series—1Urackmountableappliance(seegure2).
Figure 1 Kerio Operator Box 1210
Figure 2 Kerio Operator Box 3220
Control Description
Serial port Usedforconnectingtoaconsolewithaserialcable
USBports InputforUSBdevices
GigabitEthernetports UsedforconnectingtotheInternetandthenetworkwithan
Ethernetcable
Table 1 Kerio Operator
Ethernet Ports
USB PortsPower Switch
Serial Port
Power
Connection
Ethernet Ports
USB Ports
Serial
Port
Power
Indicator

3
4 Kerio Operator Box Installation and Conguration
Onceasuitableplacehasbeenlocatedfortheapplianceandithasbeenpluggedintoapower
outletaccordingtothesafetyinstructions,itistimetoconnectittothenetworkandcongure
settings.
1.ConnectEthernetportnumber1tothenetworkusinganEthernetcable.
 Note:Alternatively,youcanuseportnumber2whichincludesaDHCPclient.
2. Powerthedevicewiththepowerswitch.For3000series,thepowerswitchislocatedin
therearofthedevice.
3.OnthecomputeryouwishtousefortheKerioOperatorconguration,setthefollowing
TCP/IPparameters:
IP address: 10.10.10.2
Subnet mask: 255.255.255.0
 SettingthedefaultgatewayandDNSserversisnotnecessaryfortheKerioOperatorcon-
guration.
4.TheKerioOperatorPBXisconguredthroughtheKerioWebAdministrationinterface.To
connecttothisinterface,openawebbrowserandenterthefollowingURLbasedonthe
IPaddressoftheappliance:
https://10.10.10.1/admin
5.IgnoretheSSLcerticatewarning.
6.IftheURLiscorrect,adialogisdisplayedwhereyoucreateapasswordfortheadministra-
tor’saccount(Adminaccount).Oncethisdialogisconrmed,thestandardloginpage
appearsrequiringthesameusernameandpasswordtoaccesstheKerioOperatorWeb
Administration.
 Note:Alternatively,youcanusetheserialporttoconnecttheconsoletothedevice.After
theserverstarts,youcangetinformationabouttheactualnetworkcongurationoryou
can use the console to restart or turn off the appliance. Set your terminal application in
thefollowingmode:9600,8,N,1.
5 Additional Information
Forfurtherassistancewithconguration,pleaserefertoadditionaldocumentationavailableat:
•http://kb.kerio.com/category/kerio-operator/
Foronlineandcommunitybasedsupportresourcespleasevisit:
•http://www.kerio.com/support
© 2013 Kerio Technologies s.r.o. All Rights Reserved. | www.kerio.com
ENQuickInstallationGuide

© 2013 Kerio Technologies s.r.o. All rights reserved. www.kerio.com