Kersten M08256EU User manual

Assembly instrucons for M08256EU Bracket for snow plough lighng kit.
Kersten (UK) Ltd
Progress House, 39 Boulton Road, Reading, RG2 0NH
tel [phone]
Kerstenuk.com

Contents
A - Top mounng bar (1)
B - Lower mounng support (2)
C - Packing blocks (2)
D - M12x30 bolts (2)
E - M12 washers (4)
F - M12 locknuts (2)
G - M6x30 bolts (4)
H - M6 washer (12)
I - M12 locknuts (12)
J - M6x15 bolts (2)
A
C
B
D
G
E
F
IH
J
This instrucon leaet should be used in conjuncon with the full instrucon manual for
the snowplough. This light bracket kit is designed for Meyer DrivePro ploughs. When un-
packing please ensure all parts listed above are present.
Loosely assemble all items before ghtening in to correct posion.
1. Using “G, H and I”, aach lower mounng brackets “B” to the snow plough push
frame using packing blocks “C” between the plough and brackets if required.
2. Assemble top mounng bar “A” to the two lower mounng supports “B” as shown
using “D, E and F”.
3. Use bolts “J” to ax auxiliary number plate the frame.
For any Issues, please contact Kersten UK Ltd on 0118 9869 253