KevinLAB KVL-C3-K01 User manual
1. Power Connection
a. Prepare a 12V/1A adapter.
b. After Plugging the adapter into the AC outlet, connect the DC
plug of the DC adapter to “DC IN“ of the product.
c. When the power connection is completed, the red LED on the
top of the products lights up.
2. Connecting a measuring instrument
a. Prepare a measuring instrument.
b. Connect the measuring instrument and the product.
with dedicated cable through “METER” terminal.
3. Terminal Description
a. Left 3.5mm round terminal: “METER”- External
meter
connection.
b. Central 2.5mm round terminal: “UART”- monitoring
and setting.
c. Round terminal in the right square: “DC-IN”– Power
connection.
4. Specification
.LoRA Technology RF modulation
.Frequency : 902MHz ~ 928MHz
4. Specification
The revised User Manual does not contain the FCC required warning statements.
a. Rule Part 15.19(a)(3): This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
b. Rule Part 15.21: The users manual or instruction manual for an intentional or
unintentional radiator shall caution the user that changes or modifications not
expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
This manual suits for next models
1
Table of contents
