Keysight U1231A User manual

Keysight U1231A/
U1232A/U1233A
Handheld Multimeter
Quick Start
Guide

2 Keysight U1231A/U1232A/U1233A Quick Start Guide
Contacting Keysight
www.keysight.com/find/assist
(worldwide contact information for
repair and service)
Safety and EMC Information
This meter is safety-certified in
compliance with EN 61010-1 (IEC
61010-1:2001) for CAT-III 600 V,
Pollution Degree II Environment.
EMC designed in compliance with
EN61326-1. Use with standard or
compatible test probes.
Safety Notices
CAUTION
A CAUTION notice denotes a
hazard. It calls attention to an
operating procedure, practice, or
the like that, if not correctly
performed or adhered to, could
result in damage to the product or
loss of important data. Do not
proceed beyond a CAUTION notice
until the indicated conditions are
fully understood and met.
WARNING
A WARNING notice denotes a
hazard. It calls attention to an
operating procedure, practice, or
the like that, if not correctly
performed or adhered to, could
result in personal injury or
death. Do not proceed beyond a
WARNING notice until the
indicated conditions are fully
understood and met.
Safety symbols
Earth (ground) terminal
Equipment protected
throughout by double
insulation or reinforced
insulation
Caution, risk of electric
shock
Caution, risk of danger
(refer to this manual for
specific Warning or Caution
information)
Category III 600 V
overvoltage protection
CAT IV
600 V
2 Keysight U1231A/U1232A/U1233A Quick Start Guide
For further safety information details, refer to the
Keysight U1231A/U1232A/U1233A Handheld Multimeter User’s Guide.
ENGLISH

Keysight U1231A/U1232A/U1233A Quick Start Guide 3
Keysight U1231A/U1232A/U1233A Quick Start Guide 3
ENGLISH
Verify that you received the following items in the
shipment of your multimeter:
✔One pair of red and black test leads
✔Four 1.5 V AAA alkaline battery
✔Printed copy of the U1231A/U1232A/U1233A
Quick Start Guide
If any item is missing or damaged, keep the
shipping materials and contact the nearest
Keysight Sales Office.
NOTE
The descriptions and instructions in this guide apply
to the U1231A, U1232A, and U1233A handheld
multimeters.
The model U1233A appears in all illustrations.
All related documents and software are available for
download at www.keysight.com/find/hhTechLib.

4 Keysight U1231A/U1232A/U1233A Quick Start Guide
4 Keysight U1231A/U1232A/U1233A Quick Start Guide
ENGLISH
Install the Batteries
Your multimeter is powered by four 1.5 V AAA
alkaline batteries (included with the shipment).
1Turn the multimeter OFF and
remove the test leads from the
terminals.
2Loosen the screw on the battery
cover with a suitable Phillips
screwdriver.
3Remove the battery cover and
observe the polarity markings.
4Insert the batteries and replace the battery
cover and screw.
Turn On the Multimeter
To power ON your
multimeter, turn the rotary
switch to any other
position.
Controlling the Multimeter Remotely
Your multimeter is
capable of remote data
logging.
To use this feature, you
will need a PC running a
Windows operating
system, an IR-USB cable
(U1173A, purchased
separately), and the Keysight GUI Data Logger
Software.
To PC
(host)

Keysight U1231A/U1232A/U1233A Quick Start Guide 5
Keysight U1231A/U1232A/U1233A Quick Start Guide 5
ENGLISH
The Keysight GUI Data Logger software is
downloadable for free from www.keysight.com/
find/hhTechLib.
The Multimeter at a Glance
Vsense ind icator
Keypad
Rotary switch
LED flashlight
Battery cover
Tilt stand
Display screen
Input terminals
Test lead/probe holders
IR communication port
(U1233A only)

6 Keysight U1231A/U1232A/U1233A Quick Start Guide
6 Keysight U1231A/U1232A/U1233A Quick Start Guide
ENGLISH
Understanding the Rotary Switch
NOTE
Some rotary switch positions have a shifted
function printed in orange. Press to switch
between the shifted and regular function.
Shift
Esc
Legend Functions shown in the primary d isplay
Low input impedance — VZLOW Auto (AC or DC)/
VZLOW DC V/VZLOW AC V for eliminating ghost voltages
AC V/Frequency
DC V
Resistance/Short continuity/Open continuity[a]
Diode
Capacitance/Temperature (U1233A only)
Capacitance/Auxiliary Temperature (U1232A only)
Capacitance (U1231A only)
DC or AC A/Frequency
DC or AC μA/Frequency
Clamp-on AC or DC A/Frequency (U1231A only)
Auxiliary Temperature (U1231A only)
[a] Open continuity option must be enabled through the multimeter’s Setup ( >
). Open continuity is disabled by default.
WARNING
Remove the test leads from the measuring source or
target before changing the rotary switch position.
Refer to the U1231A/U1232A/U1233A User’s Guide for
a complete list and description of all rotary switch
labels for each separate multimeter model.
Hz
AUX
Hz
Hz
AUX
Hz
AUX

Keysight U1231A/U1232A/U1233A Quick Start Guide 7
Keysight U1231A/U1232A/U1233A Quick Start Guide 7
ENGLISH
Understanding the Keypad
Understanding the Input Terminals
Legend Key response when pressed for:
Less than 1 second More than 1 second
Sets the null/relative mode Enters the Hold-Log Recall
menu
Starts the MaxMin recording Stops the MaxMin recording
Sets a manual range Enables autoranging
Freezes and stores the present
reading in the display
Automatically freezes the
present reading once the
reading is stable
Turns the LCD backlight on or off. Turns the LED flashlight on or
off.
Switches between the regular
and shifted (icons printed in
orange) functions
U1233A only: Enables the
non-contact voltage detector
(Vsense).
Null
Recall
Max
Min
Auto
Range
Auto
TriHold
g
Log
Shift
Esc
Rotary position for
U1232A and U1233A Input terminals Overload protection
600 Vrms
600 Vrms for
short circuit <0.3 A
11 A/1000 V,
fast-acting fuse
Hz
AUX
Hz
Hz

8 Keysight U1231A/U1232A/U1233A Quick Start Guide
8 Keysight U1231A/U1232A/U1233A Quick Start Guide
ENGLISH
Non-contact voltage detector (Vsense)
WARNING
Voltage could still be present even if there is no alert
indication. Do not rely on the Vsense detector with
shielded wire. Never touch live voltage or conductor
without the necessary insulation protection.
The Vsense detector may be affected by differences in
socket design, insulation thickness, and insulation
type.
AC
Voltage source
1
2
3
>1s
NOTE
Press to change the Vsense detector’s sensitivity
from Hi.SE (high sensitivity) to Lo.SE (low sensitivity).
Auto
Range

Keysight U1231A/U1232A/U1233A Quick Start Guide 9
Keysight U1231A/U1232A/U1233A Quick Start Guide 9
ENGLISH
Performing Measurements
AC voltage measurements
DC voltage measurement
Voltage source
AC
3
2
1
4
2
DC
3
Voltage source

10 Keysight U1231A/U1232A/U1233A Quick Start Guide
10 Keysight U1231A/U1232A/U1233A Quick Start Guide
ENGLISH
Resistance measurement
Continuity test
4
3
2
1
Resistor
Shift
Esc
2
ON
(closed)
OFF
(open)
3
Press again to switch
between testing for shorted ( )
or open ( ) contacts.
Shift
Esc