KeyWest Technology MediaPOD-E User manual

MediaPOD-E QUICK START GUIDE
Shipment Packing List:
1. MediaP O D -E Player
2. 19V AC/DC External Power supply
3. Wi-Fi Antenna (Optional)
4. (4) VESA Mounting Screws (Optional)
5. MediaP O D -E Editor Install & Manual CD
TECHNI CAL SUPPORT
If you have any questions about any of the steps b e l o w , you can contact our technical support
department.
United States Tech Support: Call 800-331-2019 800-331-2019 press option 2
Asia/Pacific Tech Support: Call [phone] [phone]
Other International Regions: Call [phone] [phone] press option 2
Email E-mail Support: [e-mail]

CONNECTIONS
19V AC/ DC External Power Supply
RGBHV (VGA, WXGA, etc.)
19V AC/DC Power Connector
Network Connection
DVI Connector
HDMI Connector
Keyboard & Mouse if Required
Media POD-E Chassis Rear Panel Overview
Connect the power supply into the power supply
connector on the back of the rear panel after you
have connected the VGA cable to the back of the
MediaPOD-E
Connect the VGA cable from the LCD Monitor to the VGA connector on the
back of the MediaPOD-E
Wi-Fi Antenna (Optional)
Stereo Audio Output

After the VGA cable and the external power supply have been connected, the unit will start up and run
the software automatically without further interaction.It will load and run the current playlist that was
shipped with the unit. If a change is needed, follow the instructions below to change the content on the
MediaP O D -E player.
CHANGING CONTENT ON THE PLAYER
You will need a monitor, mouse and keyboard connected to the system in order to change any content.
If you have the unit setup on your network, then you can use the MediaPOD-E Editor software to upload
new content. If you do not have the unit connected to the network, then you can change the content
on the unit itself by using the MediaPOD-E Editor software that is on the MediaPOD-E Player hardware.
Press the ‘End’ key on the keyboard to stop the presentation from being displayed. This will stop the
current content from playing and bring you to the desktop of the MediaPOD-E. Once on the desktop,
double click on the MediaPOD Editor Icon to open it up (See Icon Image Below)
After the MediaPOD-E software opens up, you will then need to import any new content that
you want to be displayed. The import selection will bring open a Windows Explorer Browser for you to
locate your media from a USB Pen drive or from the MediaPOD-E hard drive itself.
Import new media files

Disconnect the mouse and keyboard to finish updating your MediaPOD-E.
TECHNI CAL SUPPORT
If you have any questions about any of the steps above, you can contact our technical support
department.
United States Tech Support: Call 800-331-2019 800-331-2019 press option 2
Asia/Pacific Tech Support: Call [phone] [phone]
Other International Regions: Call [phone] [phone] press option 2
Email E-mail Support: [e-mail]
Before you drag the new video down to the Page Layer, you will need to right click on
the previous video and select ‘Remove Item’. Once the previous item has been
removed, then you need to drag and drop the new video in the clipboard down into the
Page Layer. Press the Save icon that is in the menu bar at the top of the software. After
you have ‘Saved’ the new playlist, then you need to press the blue ‘Play’ button arrow in
the menu bar at the top of the software.
Save Playlist Play Button