KIBI Circular KBA1401 User manual

www.kibiusa.com
Circular
KBA1402
Circular
KBA1401
Circular
KBA1403
Installation Guide

Installation Considerations
These products should be located and mounted
to a wall stud. While it is possible to mount them
to any surface, a stud mounted product will
yield the best results.
Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product
in a safe place. The receipt is required to request
warranty parts.
Please keep the box and packaging materials
until your product is completely installed.
SAFETY TIPS
WARNING!
This item is not designed for use as a grab bar.
Do not mount in locations where product is likely
to be used as a grab bar.
WARNING!
Use caution when drilling into walls to avoid
drilling into electrical and plumbing lines hidden
within wall.
Tools you may need
1/4 in. drill bit
Phillips screwdriver
Silicone sealant
Pencil
Lever
Hammer
Tape measure
Electric drill

1 2
3
5
4
6
1/4”

Cleaning Instructions:
To maintain and protect the ne luster of all bath accessories, clean with a soft, damp cloth only.
DO NOT USE scrub pads, detergents or cleansers as they may harm the protective nish of your bath
accessories.
Damage to the product caused by improper care or the use of improper cleaning agents is not cov-
ered by the warranty.
Warranty:
Warranted to be free from manufacturing defects for a period of one (1) year from the date of
purchase.
www.kibiusa.com