KIBI KTF3101 User manual

Installation Guide
www.kibiusa.com
Deck-Mount Roman Tub Faucet
KTF3101

Installation Instructions
READ ALL INSTRUCTIONS BEFORE UNPACKING THE PRODUCT
Important
Tools you may need
Installation
1- For best results, we recommends that this unit be installed by a licensed, professional plumber.
2- Please read over these instructions thoroughly before beginning installation. Make sure that you have all tools
and supplies needed to complete the installation.
3- Please flush the water system to ensure that no metal swarf, solder, and other impurities can enter the faucet that
might damage the cartirdge. (Most of the leakages and water flow issues are from avoilding this very necessary
step).
4- Turn off the hot and cold water lines at the angle valve and turn on the old faucet to release any built-up pressure.
5- Keep this booklet and the receipt (or other proof of date and place of purchase) for this product in a safe place.
The receipt is required should it be necessary to request warranty parts.
6- Please keep the box and packaging materials until your product is completely installed and functional.
7-Do not return to store if problems, Contact Customer Service ASAP at 855-883-0888 or email [email protected]
to get help.
32mm
32mm
32mm
32mm
1 2
Remove the mounting bracket, metal washers, and rubber washers
from the valves.
Insert faucet into faucet hole.

Installation
G1/2
3
5
4
6
From below, Slide rubber washer, metal washer and mounting bracket
onto the thread shank. Adjust position of faucet body if necessary,
Then tighten the mounting nuts with phillips screwdriver until snug.
Install the handshower.
Turn the faucet handles all the way on. Turn on hot and cold water
supplies and flush water lines for one minute, to check if the water
lines connected in the right way and flushes away the impurity
materials.
Connect the water lines according as instruction.
Reinstall the aerator.

Dimensions
Cleaning and care
LIMITED LIFETIME WARRANTY
KIBI provides its customers with an extensive warranty as a result of our excellent workmanship and high quality components used in our products.
Mechanical warranty: A limited lifetime warranty is provided on all mechanical parts to be free from manufacturing defects in materials and
workmanship under normal use for as long as the original purchaser owns their home.
Finish warranty: A 5-year warranty is provided on all KIBI faucet finishes to the original purchaser against manufacturing defects in materials and
workmanship.
At its sole discretion, KIBI will repair or replace any part or finish that proves to be defective in material and/or workmanship under normal installation,
use and service.
This warranty is extended to the original consumer owner, but does not cover installation or any other labor charges. In no event shall KIBI be liable
for any incidental, consequential or special damages, installation cost, labor, travel time, freight costs incurred, lost profits, or contingent liabilities. KIBI
makes no representation that its products comply with any or all local building or plumbing codes. It is the consumer’s responsibility to determine
local code compliance.
Clean the faucet often with a soft cloth to keep it looking like new. For heavy cleaning you can use mild liquid
detergents or non-abrasive liquid polisher. Rinse with water and dry with a soft cloth. Avoid abrasive cleaners,
steel wool and harsh chemicals as these will dull the finish and void your warranty.
8 3/16 "
208( mm)
5 13/16 " 148( mm)
"
( mm)
Φ2 3/16
Φ55
10 15/16 " 277( mm)
1 1/8 "
28( mm)
4 3/4 "
120( mm)
4 3/4 "
120( mm)
4 3/4 "
120( mm)
9 3/8 "
238( mm)
1 7/16 "
36( mm)
1 5/8 "
42( mm)
"
( mm) Max1 3/8
Max35
1 9/16 "
40( mm)