KICK ASS KASTSP300 User manual

SOLAR PANEL
SUPER THIN
KASTSP300
V2.3
KASTSP200

1
TABLE OF CONTENTS
Thank you for purchasing a KickAss Super Thin Solar Panel.
This range is the apex in portable, convenient and lightweight
solar power to suit any camping lifestyle.
YOU!
THANK
DIMENSIONSDIMENSIONS
SPECIFICATIONS & PACKING DETAILSSPECIFICATIONS & PACKING DETAILS
FOLDING YOUR PANELFOLDING YOUR PANEL
ACCESSORIES INCLUDEDACCESSORIES INCLUDED
SOLAR REGULATORSOLAR REGULATOR
WARRANTYWARRANTY
DIMENSIONS
SPECIFICATIONS & PACKING DETAILS
FOLDING YOUR PANEL
ACCESSORIES INCLUDED
SOLAR REGULATOR
WARRANTY
22
33
44
44
55
77
2
3
4
4
5
7

2680
810
KASTSP300
2065
740
KASTSP200
2
SUPER THIN SOLAR PANEL
DIMENSIONS

SUPER THIN SOLAR PANEL 200W
SPECIFICATIONS PACKING DETAILS
MODEL NO.
RATED MAXIMUM POWER
VOLTAGE AT PMAX (VMP)
CURRENT AT PMAX (IMP)
OPEN-CIRCUIT VOLTAGE (VOC)
SHORT-CIRCUIT CURRENT (ISC)
KASTSP200
200W
18.3V
10.98A
21.6V
13.1A
DIMENSIONS (mm)
FOLDED DIMENSION (mm)
NET WEIGHT (kg)
740 x 2065 x 20
740 x 515 x 85
12.5
SUPER THIN SOLAR PANEL 300W
SPECIFICATIONS PACKING DETAILS
MODEL NO.
RATED MAXIMUM POWER
VOLTAGE AT PMAX (VMP)
CURRENT AT PMAX (IMP)
OPEN-CIRCUIT VOLTAGE (VOC)
SHORT-CIRCUIT CURRENT (ISC)
KASTSP300
300W
19.3V
15.55A
23.04V
16.7A
DIMENSIONS (mm)
FOLDED DIMENSION (mm)
NET WEIGHT (kg)
810 x 2680 x 20
810 x 670 x 85
16.8
3

FOLDING SUPER THIN SOLAR PANEL
SUPER THIN SOLAR PANEL ACCESSORIES
Anderson to Anderson 5M
8mm Heavy Duty Cable
Anderson to
Alligator Clips
4

SOLAR REGULATOR
5
The controller is preset from factory for charging AGM (Type 1), so if you are using
an AGM battery you do not need to do anything. To check or change what setting
your regulator is on, please follow the instructions on the next page:
Supported Battery Modes
The solar panel controller on the back of the panel can be set to charge 9 different
battery types AGM, Gel, Flooded, 3/4/6/7 ternary lithium cells in series, 4/8
LiFePo4 lithium cells in series.
AGM Battery
1.
Gel Battery
2.
Flooded Battery
3.
3 ternary lithium cells in series
4.
4 ternary lithium cells in series
5.
7 ternary lithium cells in series
6.
4 LiFePO4 lithium cells in series
7.
8 LiFePO4 lithium cells in series
8.
6 ternary lithium cells in series
9.
(MANUAL)
Model: KA20Areg
Working Voltage: 12/24V
Max. Charging Current: 20A
20A PWM
REGULATOR
IP68 WATERPROOF
NOTE: Please read all
the way through
instructions below at
least once before
continuing & make sure
the solar panel is
connected to your
battery and lights are
illuminated on the
Controller.
NOTE: The regulator
must be powered on
first from the battery.
Make sure to connect
the regulator with
battery first, then
connect to the solar
panel.

6
Step 1. Locate the controller which is affixed to the back of the solar panel.
Step 2. Locate the small black 'Mode button' on the right hand side of the digital
number display.
Step 3. Press and hold down the button for 3 seconds or until the digital display
beside the button begins to flash. While the display is flashing, press the mode
button to select Wait until display stops flashing. NOTE: Select , not .
Step 4. When is selected, press the button for 3 seconds until the display starts
flashing. Release the button, then press and hold it until 2 LEDs and the display
start flashing. Continue pressing the button until you select the desired battery
mode configuration.
If your solar panel is connected to your battery and is charging normally,
indicators should show:
Battery Indicator - Solid On
Solar Indicator - Slow Flashing
MODE BUTTON
DIGITAL DISPLAY (L.E.D)
SOLAR INDICATOR
BATTERY INDICATOR
SOLAR CONTROLLER END VIEW
Step 5. After suitable battery type is selected, press and hold the button until the
LEDs are not flashing.
AGM Battery
1.
Gel Battery
2.
Flooded Battery
3.
3 ternary lithium cells in series
4.
4 ternary lithium cells in series
5.
7 ternary lithium cells in series
6.
4 LiFePO4 lithium cells in series
7.
8 LiFePO4 lithium cells in series
8.
6 ternary lithium cells in series
9.
5
5.
5. 5.
8
5

KICKASSPRODUCTS.COM.AU
7