Kieback&Peter DS230 User manual

Kieback&Peter GmbH & Co. KG
Tempelhofer Weg 50, 12347 Berlin/Germany
Telefon: [phone], Telefax: [phone]
www.kieback-peter.de, [e-mail]
Datasheet 3.50-32.020-01-EN
DS230/4..32 Actuating Drives
Issue 2009-03-15
A
Änderungen vorbehalten - Contents subject to change - Sous réserve de modifications - Reservado el derecho a modificación - Wijzigingen
voorbehouden - Con riserva di modifiche - Innehåll som skall ändras - Změny vyhrazeny - Zmiany zastrzeżone - Возможны изменения -
A változtatások jogát fenntartjuk - 保留未经通知而改动的权力
Product Description
DS230/4..32 Actuating Drives
Application
DS230/4, DS230/8, DS230/16, DS230/24 and DS230/32 actuating
drives with 2-point or 3-point control are used to control air dampers
in VAC plants.
The drives are equipped with a universal adapter and are mounted
directly on the air damper axle.
Contents Page
Important Information Regarding Product Safety ..................................................................................................2
Item........................................................................................................................................................................3
Technical Data.....................................................................................................................................................3
Accessories (not included in delivery) .................................................................................................................3
Dimensions..........................................................................................................................................................4
Connection...........................................................................................................................................................4
Installation..............................................................................................................................................................5
Commissioning ......................................................................................................................................................6
Setting rotational direction and rotational angle limitation DS230/4 ....................................................................6
Setting rotational direction DS230/8..32 ..............................................................................................................8
Rotational angle limitation DS230/8..32...............................................................................................................9
DS230/4..32/E auxiliary switch setting...............................................................................................................10

APage 2 / 10
Product DescriptionDS230/4..32 Actuating Drives
Datasheet 3.50-32.020-01-EN
Important Information Regarding Product Safety
Safety Instructions
This data sheet contains information on installing and commissioning the product "DS230/4..32 Actuating
Drives". Each person who carries out work on this product must have read and understood this data sheet. If
you have any questions that are not resolved by this data sheet, you can obtain further information from the
supplier or manufacturer.
If the product is not used in accordance with this data sheet, the protection provided will be impaired.
Applicable regulations must be observed when installing and using the device. Within the EU, these include
regulations regarding occupational safety and accident prevention as well as those from the VDE (Association
for Electrical, Electronic & Information Technologies). If the device is used in other countries, it is the responsi-
bility of the system installer or operator to comply with local regulations.
Mounting, installation and commissioning work on the devices may only be carried out by qualified technicians.
Qualified technicians are persons who are familiar with the described product and who can assess given tasks
and recognize possible dangers due to technical training, knowledge and experience as well as knowledge of
the appropriate regulations.
Meaning of the Symbols
WARNING
Indicates a hazard of medium risk which can result in death or severe bodily injury if it is not avoided.
CAUTION
Indicates a hazard of low risk which can result in minor or medium bodily injury if it is not avoided.
!NOTICE
Indicates a hazard of medium risk which can result in material damage or malfunctions if it is not avoided.
Note
Indicates additional information that can simplify the work with the product for you.
Notes on Disposal
For disposal, the product is considered waste from electrical and electronic equipment (electronic waste) and
must not be disposed of as household waste. Special treatment for specific components may be legally binding
or ecologically sensible. The local and currently applicable legislation must be observed.

A
Page 3 / 10
Datasheet 3.50-32.020-01-EN
DS230/4..32 Actuating DrivesProduct Description
Item
Technical Data
Accessories (not included in delivery)
DS230/4 AC 230 V actuating drive with 4 Nm torque
DS230/8 As above, but with 8 Nm torque
DS230/16 As above, but with 16 Nm torque
DS230/24 As above, but with 24 Nm torque
DS230/32 As above, but with 32 Nm torque
DS230/../E Data same as for DS230/4..32, but with 2 adjustable auxiliary switches
DS230/../R1/1000 Data same as for DS230/4..32, but with feedback potentiometer 1 kΩ
Nominal voltage AC 230 V
Power consumption In operation
In end position
DS230/4 4.0 W; DS230/8..24 5.0 W; DS230/32 5.5 W
DS230/4 3.0 W; DS230/8..24 0.5 W; DS230/32 1.0 W
Control 2-point or 3-point signal AC 24 V (open/close or open/stop/close)
Position indication Scale on actuating drive
and DS230/../R1/1000 over feedback potentiometer 1 kΩ
Torque DS230/4
DS230/8
DS230/16
DS230/24
DS230/32
4 Nm for damper surface area up to 0.8 m²
8 Nm for damper surface area up to 2 m²
16 Nm for damper surface area up to 4 m²
24 Nm for damper surface area up to 6 m²
32 Nm for damper surface area up to 8 m²
Rotational angle 0 to 90° working range, invertible rotational direction
DS230/4 Rotational angle limitation: 0 to 30° and 60° to 90° pos-
sible
DS230/8..32 Rotational angle limitation: 5° to 85° in 5° increments
possible
Run time DS230/4
DS230/8
DS230/16
DS230/24
DS230/32
35 s for 90° rotational angle
30 s for 90° rotational angle
80 s for 90° rotational angle
125 s for 90° rotational angle
140 s for 90° rotational angle
Auxiliary switches DS230/../E 2 adjustable auxiliary switches, AC 230 V, 3 (1.5) A, deliv-
ery setting: 10° and 80° rotational angle
Potentiometer DS230/../R1/1000 feedback potentiometer 1 kΩ; 0.5 W, ±10%
Degree of protection DS230/4
DS230/8..32
IP42 (IP44 with M16 x 1.5 screw fitting)
IP54 (cable at the bottom)
Ambient temperature -20 °C to +50 °C
Ambient humidity 5 to 90% r.h., non-condensing
Weight DS230/4 0.95 kg; DS230/8..32 1.2 kg
ZKGH Only for DS230/8..32: one actuating lever with centering pin and two KG8 ball joints

APage 4 / 10
Product DescriptionDS230/4..32 Actuating Drives
Datasheet 3.50-32.020-01-EN
Dimensions
Connection
DS230/4 DS230/8..32
3-point control 2-point control
Parallel control of up to max. 5 DS230/.. possible
Additional connection for auxiliary switches: AC 230 V, 3 (1.5) A (contact position at 0°)
Additional connection for feedback potentiometer
12 3
DS230/4..32
230 V AC
N
L1
12 3
DS230/4..32
230 V AC N
L1
DS230/4/E
21 22 23 24 25 26
DS230/8..32/E
21 22 23 24 25
11 12 13
0%
100%
1k Ω
DS../R1/1000

A
Page 5 / 10
Datasheet 3.50-32.020-01-EN
DS230/4..32 Actuating DrivesProduct Description
Installation
WARNING
Contact with live components of the building’s electrical system can cause death due to electric shock.
Mount or remove only when power is switched off.
Comply with VDE guidelines and local wiring regulations when mounting/removing.
!NOTICE
Observe mounting and setting instructions.
DS230/4 DS230/8..32
ZKGH Accessories
Only for DS230/8..32
(1) Air damper axle
(2) 2 pieces KG8
(3) Centering pin
(4) Actuating lever
11
2
3
4

APage 6 / 10
Product DescriptionDS230/4..32 Actuating Drives
Datasheet 3.50-32.020-01-EN
Commissioning
Setting rotational direction and rotational angle limitation DS230/4
WARNING
Contact with live components of the building’s electrical system can cause death due to electric shock.
- Disconnect the actuating drive from power before removing the cover.
Fig. DS230/4
(1) Cover screw
(2) Sliding switch for manual adjustment
Actual product not shown
(3) Clamping screw for securing the air damper
axle.
(4) Left stop for mechanical limitation of rotational
angle, adjustable 0° to 30°
(5) Connection terminal
(6) Cable bushing
(7) Plug
(8) Right stop for mechanical limitation of rotational
angle, adjustable 0° to 30°
1
2
3
4
5
6
7
8

A
Page 7 / 10
Datasheet 3.50-32.020-01-EN
DS230/4..32 Actuating DrivesProduct Description
Note
Screws (4) and (8) can be used to reduce the 90° angle/working range by 30° each from the two end positions.
Turn the plug (7) from the motor connection by 180° to reverse
the direction of rotation.

APage 8 / 10
Product DescriptionDS230/4..32 Actuating Drives
Datasheet 3.50-32.020-01-EN
Setting rotational direction DS230/8..32
WARNING
Contact with live components of the building’s electrical system can cause death due to electric shock.
- Disconnect the actuating drive from power before removing the cover.
Fig. DS24/8..32
(1) Cover screw
(2) Sliding switch for manual adjustment
Actual product not shown
(3) Clamping screw for securing the air damper
axle.
(4) Plug
(5) Connection terminal
(6) Cable bushing
(7) Pressure pin for manual adjustment
Turn the plug (4) from the motor connection by 180°
to reverse the direction of rotation.
1
2
3
4
56
7

A
Page 9 / 10
Datasheet 3.50-32.020-01-EN
DS230/4..32 Actuating DrivesProduct Description
Rotational angle limitation DS230/8..32
The maximum working range (rotational angle) of actuating drives DS24/8..32 is 90° (delivery setting) The
adapter can be reinserted if the rotational angle needs to be limited.
Setting Example
Proceed as follows to limit the rotational range to 0°to 60° from 0° to 90°:
(1) Adapter
Set actuating drive to 90° rotational angle for
end position.
Disengage the adapter’s retaining clips (1) on
the underside of the actuating drive and pull out
the adapter (1) to the front of the unit.
Re-insert the adapter (1) in the new end posi-
tion of 60° rotational angle.
Push in the adapter (1) in the new 60° end posi-
tion until the retaining clip locks in place again.
1
1
2
34

APage 10 / 10
Product DescriptionDS230/4..32 Actuating Drives
Datasheet 3.50-32.020-01-EN
DS230/4..32/E auxiliary switch setting
Setting example
Switch off mains power supply and remove the cover.
Auxiliary switch A - Set to 30° rotational angle:
- Move sliding switch for manual adjustment and set adapter to 30° rotational angle.
- Turn ratchet wheel D1 until microswitch E1 switches.
Auxiliary switch B - Set to 70° rotational angle:
- Move sliding switch for manual adjustment and set adapter to 70° rotational angle.
- Turn ratchet wheel D2, until microswitch E2 switches.
Replace the cover, switch on mains power supply, and perform operational check.
Actual product not shown
(1) Adapter with position indicator
(2) Operating pins with the two micro
switches
(3) Connection terminal for auxiliary
switches
(4) Pressure pin for manual adjustment
Factory setting
Auxiliary switch A: Switches when rotational angle >10°
Auxiliary switch B: Switches when rotational angle >80°
1
2
3
4
DS230/4/E
21 22 23 24 25 26
10° 80°
AB
DS230/8..32/E
21 22 23 24 25
10° 80°
AB