KinCony KC868-H16 User manual

KC868-H16 Device User Manual (V0508)
Ⅰ. Software Downloading
Ⅱ. Remote Controlling Operation
1. Mobile APP controlling manual
2. Computer Program controlling manual (WA mode)
Ⅲ. Local Controlling Operation (LA mode)
Ⅰ. Software Downloading
1. Use mobile phone to scan the below QR code to download the APP
2. KC868-H16 software (P one APP QR code, PC Program, Vircom Network Tool) downloading link:
www.kincony.com/download/Disk_KC868-H16.rar
Please download the file to ha e the software firstly, as below, it is default you already ha e and know them.

Ⅱ. Remote Controlling Operation
1. Mobile APP controlling manual
1.1 Power on the device and connect the internet cable
1.2 Register
After downloading and installing the APP, Register your account (11 digitals) and password,
(Pls make a note for your password in case forgotten).
1.3 Adding device
Login in, choose 【 Mine 】 【 My Room 】 , add floor and room(this step is necessary, please make sure this)
Floor and Room can be renamed randomly, then click 【 OK 】
Choose 【 Mine 】 【 Host Manager 】 ,click 【 add 】 ,scan the QR code on the device, and input a name.
Click 【 Add 】 to finish adding device

Click 【 Mine 】 【 My Device 】 【 Unclassified 】 ,Hold pressing the ICON to choose one room
And give a name for the device.
Hold pressing the number of the relay, the name can be renamed.
Now adding device is completed, the device can be controlled by mobile APP.
1.4 Create Scene Mode
Login in APP, Click
【 Scene 】 — 【 + 】 or 【 Add 】 Input Mode name ， choose Mode icon ，

Time setting Optional(Function of timing), at 【 Mode setting 】 , input the actions you want to control, click 【 Save 】 ;
see below pic4 2 ， pic4 3 ， pic4 4 ， pic4 5 。
Pic4 2 Add Scene Pic4 3 Add Scene 2
Pic4 4 Time setting (Optional) Pic4 5Mode setting (Actions controlled)
“Mode name” can be named; e.g.: Back Home ， Leaving Home ， Meeting ；
“Mode icon” can be changed ；
“Time setting” is for timing (optional) ， Pic4 4 ， Repeated time: Monday, Tuesday, Wednesday and 7:10 am.
Meaning the scene mode is opened at 7:10 am each Monday, Tuesday and Wednesday.
“Mode setting” is for adding the actions required to control
1. Press ‘Click to add action’, choose KC868H8
2. Press [Enter the ctrl pg],you can set the actions, see Pic4 7
a. Open light1
b. Press the name, it will save the action
3. Press Execute ,you can set Delay time

4. Press ‘Save’
See Pic4 6, Pic4 7 ， Pic4 8 。
Pic4 6 Pic4 7 Pic4 8
II. Inputting terminals trigger linkage of the scene mode
Click 【 Mine 】 【 Setting 】 【 Safe set 】 ,Hold pressing 【 input1 】 to left,
The parameters can be modified.
【 Device name 】 : input one name
【 Related scene 】 click to choose one scene mode to linkage
【 Alarm message 】 Input message text sent to mobile(setting message allowed) ；
Set light1 opened successfully
1. Open light1
2. Press the name to
save the action

When inputting terminals are triggered, the phone will receive 【 Alarm
message 】 ;
And the actions of the scene mode will be opened.
1 、 Turn on the alarm button
2 、 Start 00 23 and Arming
(00 23 means Arming the
whole day.
00—08 means Arming from
00:00 to 08:59)

2. Computer Program controlling manual (WA mode)
2.1 Power on the device and connect the internet cable
2.2 The first time to use the program, double click to install the Acti eX Installer.
2.3 Then double click to open the program and setup the configuration
Step 1: Choose 【 Mode 】 - 【 WAN 】

Step 2: click 【 System 】 - 【 Parameter Config 】
Step 3: Input Serial Number of the de ice at the right bottom, and then click 【 Sa e 】
(Serial Number is the 24 digitals on the QR code on the de ice)
Here, you can gi e new name for each relay if required.
Step 4: Close the program and then open it again, wait for approx one minute
Then choose 【 Mode 】 - 【 WAN 】
Now the program can control the de ice remotely
Ⅲ. Local Controlling Operation (LA mode)
1.1 Power on the device and connect the internet cable

1.2 Make sure your computer and the device are belonging to the same local internet
1.3 Open the “Vircom Network Tool”, and setup the configuration of the de ice
Step 1: Click 【 De ice 】
Step 2: Click 【 Auto Search 】
Step 3: Click
【 Edit De ice 】

Step 4: Choose “TCP Ser er” for the 【 Work Mode 】， instead of “UDP”
Step 5: Make sure keeping the others unchanging, meanwhile remember the IP Address and Port
The IP and port will be required as following; you can open the tool and check back when you forget.
Step 6: Click 【 Modify Setting 】 to finish the setup, then power off the de ice and power on again.
You may not close the Vircom network tool program in case you want to check the IP and Port.
1.4 The first time to use the program, double click to install the Acti eX Installer.
1.5 Then double click to open the program and setup the configuration
Step 1: Choose
【 System 】 - 【 Menu Config 】

Step 2: Input the IP number and Port number as remembered from the Vircom network tool.
Then click 【 Sa e 】 to return
Step 3: Click 【 Local Control 】 - 【 LAN Connect 】 , 【 Connect OK! 】 is showed at the bottom
Step 4: Click 【 Local Control 】 - 【 Initialization 】 , 【 Initialization completion 】 is showed at the bottom
Step 5: Now you can control the de ice by the program locally.