Kinder Valley Little Gem Rocking Stand User manual

Little Gem Rocking Stand
IMPORTANT- Read these instructions carefully
before use and keep for future reference.
• Dimensions(mm): (L)750 x (W)410 x (H)435*
• Min/Max Moses basket base size (mm): (L)670-830 x (W)300-360*
• Easy assembly • Safe & Sturdy • Suitable to use from birth
• Rocking motion to soothe baby
ASSEMBLY INSTRUCTIONS
Need Help?
Call 0844 7744 644
or Email [e-mail]
*Approx. measurements only. Sizes may vary.

Little Gem Rocking Stand
Assembly Instructions
BEFORE YOU START
IMPORTANT - RETAIN FOR FUTURE REFERENCE -
READ CAREFULLY
Instructions for safe use:
WARNING - Do NOT attach anything to the stand that may affect its stability.
WARNING - Remove all packaging materials before use.
WARNING - Store in a cool, dry place away from children when not in use.
WARNING - Do NOT let other children play unattended near the moses
basket and stand.
WARNING - Use only on firm ground which is horizontal, level and dry.
WARNING - Do NOT use if any part is broken, torn or missing.
WARNING - Only use replacement parts supplied by or approved by
Kinder Valley
WARNING - Your product can be cleaned with a damp cloth. Never use
harsh abrasives, bleach or strong detergents.
FIXTURES & FITTINGS
CHECK THAT YOU HAVE ALL FIXTURES AND FITTINGS BEFORE
ASSEMBLY, AND ENSURE THEY ARE NOT BROKEN.
A x2 Curved Base Rail
B x4 Legs
x2 Left & x2 Right
C x2 Support Bars
D x4 Crossrails
E x2 Plastic Rails
F x8 70mm Screws
G x12 30mm Screws
H x8 20mm Screws
Number of people to assemble:
One Adult is required to assemble this item.
Time to assemble:
20 minutes.
Tools required:
Cross-head screwdriver.
I Canvas Support Mat

Repeat this step with the remaining
curved base rail and legs .
C
B
B
G
G
B
B
Step 1 Step 2
Step 3
A
F
Step 4
Fasten 2 legs to support bar
using 2 x 30mm screws . Large
holes should be facing the same way.
B C
G
Fasten curved base rail to legs
using 4 x 70mm screws .
A B
F
B C
Repeat this step with the remaining
2 legs and support bar .
Attach 4 x Cross Rails to legs using
4 x 30mm screws .
D
G
F
IMPORTANT - RETAIN FOR FUTURE REFERENCE
D
GG
B
B
D
Slide the Canvas Mat onto the
crossrails at the top of the stand.
I
D
DD
GGI
D
D
I
A B

IMPORTANT - RETAIN FOR FUTURE REFERENCE
DD
B
BB
B
Attach the remaining legs and
curved base rail to the main
structure using the remaining
2 x 30mm screws .
G
B
A
Finally, attach plastic rail to legs
using the 2 x 15mm screws .
E
H
Repeat this step with the remaining
plastic rail . The plastic rails have
6 x holes one end and 2 x holes the
other to allow for adjustment depending
on the size of your moses basket.
E
Step 5
DD
G
G
G
G
Step 6
E
H
H
HH