Kinder Valley OPAL MOSES User manual

Number of people to assemble:
One adult is required to
assemble this item. 15 Minutes.
Need Help?
IMPORTANT- READ THE INSTRUCTIONS
CAREFULLY AND RETAIN FOR FUTURE REFERENCE
OPAL MOSES BASKET FOLDING STAND
Assembly Instructions

Thank you for choosing this Kinder Valley Moses Basket Folding
Stand. In order to build this stand correctly, please follow the instructions
carefully.
If you encounter any problems please contact the Kinder Valley helpline:
0844 7744644 or email: [e-mail]
www.kinder-valley.com
This stand is designed for use with a Palm, Maise or Wicker basket of the
following sizes: MIN - MAX (L)670-830mm x (W)300-320mm.
Do not attach anything to the stand that may affect its stability.
The stand should be inspected regularly for any damage that may affect its
safe use.
Never leave anything in the stand or attached to the sides, that could
provide a foothold for other children, or present a danger of strangulation
or suffocation.When the stand is not in use it must be folded and stored away
Store in a cool, dry place when not in use.
Regularly check that nuts and bolts are secure. Loose fittings can result in
snagging clothes or cords posing a risk of strangulation.
In order to clean, use only a mild detergent and warm water. Do not use
bleach or any abrasive substances.
This stand conforms to BS EN 1466:2014
•
•
•
•
•
•
•
•
WARNING:
WARNING:
WARNING:
WARNING:
Do not use this stand if any part is broken, torn or missing
and use only spare parts approved by the manufacturer.
Remove all packaging materials before use.
Do not let other children play unattended near moses basket
Use only on firm ground which is on a horizontal level & dry.
& stand.
!
!
2
!
!
Assembly Instructions for Kinder Valley Moses Basket Folding Stand
BEFORE YOU START
IMPORTANT- RETAIN FOR FUTURE REFERENCE- READ CAREFULLY.
from children.

A
A
A
B
B
B
Parts List:
Ax 2 Leg Set Bx 1 Canvas
Dowels supports
Dx 2 Plastic Rails
C2
C1
Ex 8 40mm
Screws
Fx 4 13mm
Screws
x 1 Long Dowel
x 1 Short Dowel
BEFORE YOU START
IMPORTANT- RETAIN FOR FUTURE REFERENCE- READ CAREFULLY.
3
Attach the canvas dowel supports to the top of the legs (in the hole situated nearest
to the groove) ensuring the metal fasteners are on the underside.
Ensure the smaller dowel is inserted into the inner legs, and the longer dowel in the outer
legs.
Step 1:
B A

Please ensure that all nuts and bolts are secure, tighten if necessary.
BEFORE YOU START
IMPORTANT- RETAIN FOR FUTURE REFERENCE- READ CAREFULLY.
Insert 4 x screws into the top of the
legs.
Step 2:
EE
E
E
E
Step 3:
C1
C2
E
EE
E
Slide the 2 plastic rails into the grooves at the top of the legs either side, then bend
round to slide into the other side and fix into place using 4 x
Step 4:
D
F
F
D
F
F
D
F
4
Insert c1 into outer legs.
Insert c2 into inner legs.
Insert 4 x E to tighten.
C1
C2
E