Kinder Little Gem User manual
Dimensions(cm): (L)75cm x (W)50cm x (H)43.5cm*
Min/Max Moses Basket Base Size: (L)75cm x (W)41cm
• Easy assembly • Safe & Sturdy • Solid Pine Wood
• Smooth Rocking Motion • Suitable From Birth
*Approx. measurements only. Sizes may vary.
Contact Us...
T0844 7744644 - Option 2
www.kinder-valley.com
Vaey
K I N D E R®
ASSEMBLY INSTRUCTIONS
Little Gem Rocking Stand
EFC67
IMPORTANT, RETAIN FOR FUTURE
REFERENCE: READ CAREFULLY
ASSEMBLY INSTRUCTIONS
LITTLE GEM ROCKING STAND
Vaey
K I N D E R®
IMPORTANT, RETAIN FOR FUTURE REFERENCE:
READ CAREFULLY
Instructions for safe use:
Before you start
WARNING - Do NOT attach anything to the stand that may affect its stability.
WARNING - Remove all packaging materials before use.
WARNING - Store in a cool, dry place away from children when not in use.
WARNING - Do NOT let other children play unattended near the moses basket and stand.
WARNING - Use only on firm ground which is horizontal, level and dry.
WARNING - Do NOT use if any part is broken, torn or missing.
WARNING - Only use replacement parts supplied by or approved by Kinder Valley.
WARNING - Your product can be cleaned with a damp cloth. Never use harsh abrasives,
bleach or strong detergents.
CHECK THAT YOU HAVE ALL FIXTURES AND FITTINGS BEFORE
ASSEMBLY, AND ENSURE THEY ARE NOT BROKEN.
A
x2 Curved Base Rail
Number of people to assemble:
One adult is required to
assemble this item.
x2 Support Bars
x4 Legs (x2 Left & x2 Right)
B
C
Fixtures & Fittings
x Cross Rails
x2 Plastic Rails
D
E
x8 70mm Screws
F
x12 40mm Screws
G
x12 13mm Screws
H I
Canvas Support Mat
Tools you’ll need for assembly:
IMPORTANT - RETAIN FOR FUTURE REFERENCE
Fasten 2 Legs (x1 Left and x1 Right) to Support Bar using 2 x 40mm Screws .
Large holes should be facing the same way. Repeat this step with the remaining
2 Legs and Support Bar .
Step 1
B G
BC
C
Step 2
Fasten Curved Base Rail to Legs using 4 x 70mm Screws . Repeat this step
with the remaining Curved Base Rail and Legs . Make sure the groove on Curved
Base Rail is facing the outside.
A B F
A B
BB
FF
GG
BB
C
A
IMPORTANT - RETAIN FOR FUTURE REFERENCE
Step 3
Attach x4 Cross Rails to using x4 40mm Screws .
DG
Step 2
Step 4
Slide the Canvas Mat onto the Cross Rails at the top of the stand.
ID
G
G
G
G
DD
DD
I
DD
IMPORTANT - RETAIN FOR FUTURE REFERENCE
Step 5
Step 6
G
G
G
G
Attach remaining to to the main structure using the remaining x2 40mm Screws .
STEP 3 G
Finally, attach Plastic rail to Legs using x2 13mm Screws . Repeat this step
with the remaining Plastic Rail . The Plastic rails have x6 holes one end and x2
holes the other to allow for adjustment depending on the size of your moses basket.
E B H
E
EE HH H H
BBBB
Table of contents
