King Canada KC-890 User manual

8” BENCHTOP GRINDER
INSTRUCTION MANUAL
COPYRIGHT © 2001 ALL RIGHTS RESERVED BY KING CANADA TOOLS INC.
MOD.: KC-890
IMPORTANT INFORMATION
PROOF OF PURCHASE
Please keep your dated proof of purchase for warranty and servicing purposes.
REPLACEMENT PARTS
Replacement kits for this tool are available at our authorized KING CANADA service centers
across Canada. For servicing, contact or return to the retailer where you purchased your product
along with your proof of purchase.
LIMITED TOOL WARRANTY
KING CANADA makes every effort to ensure that this product meets high quality and durability
standards. KING CANADA warrants to the original retail consumer a 2-year limited warranty as
of the date the product was purchased at retail and that each product is free from defects in
materials. Warranty does not apply to defects due directly or indirectly to misuse, abuse,
negligence or accidents, repairs or alterations and lack of maintenance. KING CANADA shall in
no event be liable for death, injuries to persons or property or for incidental, special or
consequential damages arising from the use of our products. Totake advantage of this warranty,
the product or part must be returned for examination by the retailer. Shipping and handling
charges may apply. If a defect is found, KING CANADA will either repair or replace the product.
PARTS DIAGRAM & PARTS LISTS
Refer to the Parts section of the King Canada web site for the most updated parts diagram and
parts list.

REPLACEMENT PARTS
Illustrated below are the available replacement kits for your 8” Bench Grinder. They are as follows;
1) Eye Shield Kit (Part number 2508900151).This eye shield kit includes Left & Right eye shields and all the parts
necessary for assembly. See Figure B below.
2)Tool Rest Kit (Part number 2508900311). This tool rest kit includes Left & Right tool rests and all parts necessary
for assembly. See Figure C below.
3) Switch (Part number 2508900321).
4) A variety of grinding wheels are available at your nearest King Canada dealer
FIGURE A
FIGURE C
FIGURE B
Eye Shield Kit
Tool Rest Kit
Switch
Eye Shield
Tool Rest
Washer
Hex. bolt
Eye Shield clip
Support
Lock Knob