Kingfisher BF50EN User manual

Model Number - BF50EN
EAN Code - 8422248611749
DRINKS COOLER
INSTRUCTION MANUAL

2
TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS
Read this instruction manual carefully before using the
appliance. It contains important information for your safety
as well as operating and maintenance advice.
1. Observe all safety instructions to avoid damage through improper
use! Follow all warnings on the appliance.
2. Keep this instruction manual for future use. Should this appliance
be passed on to a third party, then this instruction manual must
be included.
3. No liability will be accepted for damage resulting from improper
use or non-compliance with these instructions.
..............................................................................................................6
Parts list ............................................................................................................... 7
Before first use
...........................................................................................................9
Installation instructions ..........................................................................................8 - 9
Operation ................................................................................................................10
Cleaning and maintenance ........................................................................................11
Environmental protection............................................................................................12
Technical data .................................................................................................... 12 - 13
Guarantee .........................................................................................................................13
Important safety instructions .................................................................................... 2 - 6
Intended use

3
IMPORTANT SAFETY INSTRUCTIONS
4. Only use this appliance for its intended use. This appliance is
intended for indoor use only.
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
7. Regularly check the power plug and power cord for damage.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
8. Keep the appliance away from any hot surfaces and open flames.
Always operate the appliance on a level, stable, clean and dry
surface. The appliance is suitable for climatic class 4. Protect
the appliance against heat (over 32°C) and cold (under 16°C),
dust, direct sunlight, moisture, dripping and splashing water.
9. The maximum loading of each type of shelf should not exceed
8 kg.
10. Do not store explosive substances such as aerosol cans with a
flammable propellant in this appliance.
11. When disposing of the appliance do so only at an authorized
waste disposal centre. Do not expose to flame.
6. This appliance can be used by children aged from 8 years and
5. This appliance is intended to be used in a normal domestic
environment only. Commercial usage is not covered by
the manufacturers warranty.

4
IMPORTANT SAFETY INSTRUCTIONS
WARNINGS!
- Keep clear of obstruction all ventilation openings in the
appliance enclosure or in the structure for building-in.
- Do not use mechanical devices or other means to
accelerate the defrosting process, other than those
recommended by the manufacturer. Do not use any
heat sources, such as candles or heaters, to speed up
defrosting.
- Do not damage the refrigerant circuit.
- Do not use electrical appliances inside the food storage
compartments of the appliance, unless they are of the type
recommended by the manufacturer.
- The refrigerant (R600a) is flammable.
- The refrigerant isobutene (R600a) is contained within the
refrigerant circuit of the appliance, a natural gas with a high
level of environmental compatibility, which is nevertheless
flammable. During transportation and installation of the
appliance, ensure that none of the components of the
refrigerant circuit becomes damaged.
DANGER OF FIRE AND EXPLOSION!
- Do not use the appliance near explosive or flammable
vapours.
- Do not store any explosive or flammable substances, like
benzine, liquid gas or glue, in the appliance.
- If gas flows out of the appliance, do not pull the power
plug from the outlet as this can cause sparks and fire.
- Do not store explosive substances such as aerosol cans
with a flammable propellant in this appliance.
-CAUTION: RISK OF FIRE!
WARNINGS!
- If your eyes have been in contact to the refrigerant, wash
under running water and go to a doctor immediately.
- To avoid a hazard due to instability of the appliance, it
must be installed according to the instructions.

5
IMPORTANT SAFETY INSTRUCTIONS
12. Before connecting the appliance to the power supply, check
that the power supply voltage and current rating corresponds
with the power supply details shown on the appliance rating
label.
13. Never use a damaged appliance! Disconnect the appliance
from the wall outlet and contact your supplier if it is damaged.
DANGER OF ELECTRIC SHOCK! Do not attempt to repair
the appliance yourself. In case of malfunction, repairs are
to be conducted by qualified personnel only.
14. Proper disposal of refrigerators
• Before you dispose of an old cooler:
- Remove the doors.
- Leave the shelves in place so children cannot easily climb inside.
- Have the cooler circuit removed by a qualified service
technician.
• Do not damage the cooler circuit during storage and
transportation of old appliances! Make sure that the evaporator
pipes, refrigerant circuit, and surface coverings are not
damaged. Avoid contact with the eyes as the cooler can cause
serious eye injury.
• Do not store old appliance near sources of heat and ignition.
The cooler of this appliance is highly flammable.
• Disable discarded appliances by unplugging the plug and
cutting the power cord.
15. To avoid damaging the cord, do not squeeze, bend or chafe
it on sharp edges. Keep it away from hot surfaces and open
flames as well.
16. Lay out the cord in such a way that no unintentional pulling or
tripping over it is possible.
17. Do not place heavy objects on top of the appliance. Do not place
objects with open flames (e.g. candles) on top of or beside the
appliance. Do not place objects filled with water (e.g. vases) on
or near the appliance.

6
IMPORTANT SAFETY INSTRUCTIONS
18. For additional protection, we recommend the use of a residual
current device (RCD) with a tripping current not exceeding 30mA
in the electrical circuit supplying power to your appliance.
19. This appliance is classified as protection class I and must be
connected to a protective ground (Earth).
20. Do not pull the power plug out of the wall outlet by the power
cord and do not wrap the power cord around the appliance.
21. Connect the power plug to an easily reachable wall outlet so
that in case of an emergency the appliance can be unplugged
immediately. Pull the power plug out of the wall outlet to
completely switch off the appliance. Use the power plug as
the disconnection device.
22. Disconnect the power plug from the wall outlet when not in use
and before cleaning.
23. Always turn the appliance off before disconnecting the power
plug.
24. In the event of fire, first pull the power plug out of the power
outlet or disconnect the appliance from the power supply before
taking appropriate measures to fight the fire.
25. Never use an extension cord – Risk of overheating! If the power
cord does not reach the nearest wall outlet, either rearrange
the store layout or ask qualified electrician to fix a new outlet.
26. Important! Allow the appliance to stand upright for 8 hours
before connecting to a wall outlet for the first time, in order to
allow the refrigerant to settle.
INTENDED USE
This drinks cooler is intended for keeping alcoholic wines, juices,
nutritional drinks, soft drinks,snacks,water,beer,etc., cold and fresh.

7
PARTS LIST
1 Door hinge cap
2 Door hinge
3Double layer glass door
4 Power cord with power plug
5
Temperature knob 0-5 (on
the back of the unit)
6 Shelf
7 Cooler enclosure
8 Drain pipe
9 Compressor
FOR MODEL BF50EN
No. Description

BEFORE FIRST USE
• Remove all packaging materials.
• Warning! Packaging materials are not a toy. Children should not play with the packaging
materials, as they pose a risk of swallowing and suocation!
• Check for completeness and damages that may have occurred while transporting
the product. In case of damages or incomplete delivery, please contact your dealer
( Guarantee).
• Ensure that there is sufficient ventilation. Keep a minimum distance of 15cm between the cooler
and other appliances or walls.
Note: After moving the cooler, allow it to stand upright for 8 hours before connecting
it into a wall outlet.
INSTALLATION INSTRUCTIONS
• Clean the appliance ( Cleaning and care).
• Make sure all parts of the appliance are completely dry.
• Place the appliance on a horizontal, stable, and heat-resistant surface.
When locatingthe cooler, keep a minimumfixed distance of 15cms between all sides of the
cooler and the wall or other surfaces.For details, refer to the illustration below:
8

INSTALLATION INSTRUCTIONS
Note: After reversing the door hinge, the door gasket may get loose. Should you
notice a gap between the gasket and the cabinet, gently pull it out to seal the gap.
A correct gasket positioning is the key to prevent refrigerated air from escaping.
Ideas for saving energy
• Locate the product in the coolest part of the room, out of direct sunlight, and away
from sources of heat. If this is not possible, a section of cabinetry or an added
layer of insulation will help the cooler operate more efficiently.
• Level the cooler so that the door closes tightly.
• From time to time, adjust the temperature inside the refrigerator, since it changes
along with:
- the room temperature
- the frequency at which the refrigerator door is opened and how long it stays open
- the items inside
• Place the cooler at least 15cm away from walls or other articles.
• Do not cover the product's ventilation openings.
• Place the cooler back to the upright position.
• Remove the door hinge cap.
• Loosen the screws and remove the door hinge.
• Place the door hinge on the opposite side and retighten it with screws.
• Make sure that the glass door is in the vertical position and can be closed easily.
• Reinstall the hinge cap.
Reversing the door orientation
The default left side orientation of the glass door can be changed to the right side. Use the following
procedure to change the side of the door hinge.
• Turn the temperature knob to the 0 position and disconnect the power plug from the wall outlet.
• Tilt the cooler backwards to an angle of 450 and securely support it.
• Loosen the screws on the base of the cooler and remove the bottom hinge.
• Place the bottom hinge on the opposite side and retighten it with screws.
9

OPERATION
• Connect the power plug to a suitable wall outlet.
• Turn the temperature knob to adjust the temperature. Setting 1 is the highest temperature and
Temperature knob: 0 - 5
(located at the back of
the unit)
0 - off
1 - highest temperature
setting (about 18°C)
5 - lowest temperature
setting
(coldest, about 4°C)
• First set the temperature to the max. position. After 20 minutes, adjust the temperature knob
to the middle setting.
setting 5 is the lowest temperature.
Model - BF50EN
Note: The settings (1-3) are generally intended to be used during the winter, and
the settings (4-5) during the summer.
10

CLEANING AND MAINTENANCE
Cleaning
Before cleaning and maintaining the product, disconnect the power plug from the
wall outlet.
• Remove all items from the cooler.
• Wipe the inside and outside surfaces using a damp cloth.
Tip: Acid substances can corrode the plastic parts of the cooler. Do not allow this type of
substance (e.g. lemon juice, juice from orange peels) to come in contact with the cooler.
• After cleaning, wipe all parts thoroughly and allow them to dry.
• Do not use abrasive sponges or cleaning agents, steel wool, or metallic utensils to clean the
interior or exterior of the appliance.
• To save energy, clean the compressor (9) at the back of the cooler using a brush
or a vacuum cleaner once a year.
• Regularly check the drain pipe (8) at the back panel of the cooler. Clean it whenever
the drain is blocked.
Important!
When the cooler is not in use,
• turn the temperature knob to the 0 position and disconnect the power plug from
the wall outlet.
• remove all items from the inside.
• clean and dry the inside.
• leave the door slightly open to avoid mold to grow.
Defrosting
• This cooler has a built-in automatic defrosting function, which is activated automatically when
the compressor is not running. The temperature knob must be set to the setting (1).
Note: Should the frost layer be more than 3mm thick, the cooler must be switched
off, defrosted, and cleaned.
11

ENVIRONMENTAL PROTECTION
Discarded electric appliances are recyclable and should not be discarded in the
domestic waste! Please actively support us in conserving resources and protecting
the environment by returning this appliance to the collection centres.
TECHNICAL DATA
~, 50 Hz
Rated current: 0.5 A
Protection class: Class I
Energy consumption: 0.5 KWh/24 h
(Ta: 25°C; Tc: 12°C)
Refrigerant: R600a (18 g)
Climate class: N,SN
Blowing gas: Cyclopentane
Temperature range: 4-18˚C
Noise level: 42 dB(A)
Bulb type: No bulb
Weight: 16 kg
Dimensions (W x D x H): 430 x 480 x 515 mm
Net capacity: 46 l
Remark: Ta: Ambient temperature; Tc: Setting temperature
Model BF50EN
Power supply: 220 - 240 V
12

TECHNICAL DATA
Electrical diagram for Model - BF50EN
13

IM_BF50EN BF50FR_20180118
14