Kingree KR-BT2026 User manual

WARNING
Please read and follow all of the instructions & safety precautions detailed below prior to using
this product. Failure to do so may result in serious personal injury and / or property damage.
Safety Precautions
Do not expose this product to heat sources (including open flame or direct sunlight)
Do not expose this product to water or liquids. If liquid enters the product, immediately
unplug the product from any connected power sources or devices.
Do not disassemble or modify the product.
Avoid dropping this product (or any other heavy impact which might damage the
internal circuit).
In the unlikely event of any abnormalities (such as strange odor, overheating, leaking,
color change, etc.), discontinue use immediately.
Avoid cleaning this product using liquids or chemical substances (use dry cloth only).
Only use attachments/accessories specified by the manufacturer.
Dispose of this item properly (do not dispose of it in trash receptacles and do not
attempt to incinerate it).
Do not leave this product unattended while it is in use or while it is being charged.
This product is not a toy: KEEP AWAY FROM CHILDREN.
Only re-charge this device using a USB port wall adapter (not included).
Do not re-charge via USB port on a computer.
When not being used for prolonged periods of time, please charge every 3 months to
avoid damaging the battery.
KR-BT2026 User Manual
The KR-BT2026 is a high-quality Wireless V2.1+EDR stereo speaker. Its magnetic feature
enables the user to listen to the device assembled as a sphere, or separated into two speakers
(2 speaker units can be paired wirelessly together or enjoyed separately).
Please see below product specifications & instructions.
KR-BT2026 Specifications
Battery Type: Grade A Non-Recycled Lithium Polymer Rechargeable Battery
Capacity: 800 mAh
Battery Duration/Lifespan: 500 times
Power Input: 5V/0.5A
Sound Output: 3W x 2 speakers
Sensitivity: >70 dB
Frequency Response: 100Hz - 20KHz

Distortion Rate: ＜10%
Range of Wireless Communication: 8-10M
Charge Time (0-100%): Up to 4 hours
Playback Time: Up to 5 hours
Accessories: AUX audio cable & Micro USB charging cable
Product Size: 3.5” in diameter
Net Weight: 290g
KR-BT2026 Product Map
KR-BT2026 Operation
1. Separate speakers & switch BOTH units ON (BT) (a two tone prompt will notify that
the speakers are successfully turned ON (BT) )
2. KR-BT2026 speaker units will automatically pair to each other within 5 seconds
NOTE: the KR-BT2026 default setting is stereo function (both speaker units paired to each
other)
Pairing an audio device to the KR-BT2026 (Stereo Function)
1. Once KR-BT2026 speakers units are turned ON (BT) and paired, search for the
Bluetooth signal Spector KR-BT2026 on your audio device & pair (an audio prompt
will indicate successful pairing)
Wireless button
ON( BT )/OFF/AU
3.5mm AUX input

2. Speakers can be enjoyed magnetized together on the silicone stand, or separately on
aflatsurface.
NOTE
Press button to refresh if the Spector KR-BT2026 Bluetooth signal does not
appear on your audio device
Previously paired devices will automatically re-connect to the KR-BT2026 speaker
when both devices are turned on & within range
Pairing ONE KR-BT2026 speaker unit to an audio device (Mono Function)
1. Turn ON ONE of the KR-BT2026 speaker units ONLY
2. Search for Bluetooth signal Spector KR-BT2026 on your audio device & pair
NOTE: repeat step 1-2 to pair the second speaker unit with a different audio device
Wireless Mode (Mono or Stereo)
1. Volume control & skipping songs must be controlled directly on your audio device
2. Incoming calls must be answered directly on your audio device (KR-BT2026 does
NOT have an integrated microphone)
NOTE: incoming phone calls will disrupt music play. To resume music mode, you must
press the play button from your audio device.
Connecting speaker (mono or stereo) by AUX mode
1. Plug in 3.5mm AUX audio cable into each KR-BT2026 speaker unit & into your audio
device
2. Volume control & Skipping songs must be controlled directly on your audio device
3. Incoming calls must be answered directly on your audio device (KR-BT2026 does
NOT have an integrated microphone)
To Re-charge the KR-BT2026
1. Insert AUX cables into each KR-BT2026 speaker unit & connect the USB output to a
wall adapter (not included)
2. Charge time is approximately 4 hours from 0-100%
NOTE: recharging will automatically stop once the battery is full

FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be
used in portable exposure condition without restriction.