Kingspan Tribune Xe User manual
kingspancylinders.com
Water & Energy
Hot Water Energy Storage
GB & NI
Product Guide
Range Tribune Xe
Unvented Hot Water Cylinders with Internal Thermal Expansion
Kingspan Range Tribune
Hot Water Solutions
Introduction to Kingspan Range 2
Why use Kingspan Hot Water
Cylinders 3
Coates Design Partnership 5
Introduction to Tribune Xe 7
Technical Data - Direct, Indirect
& Solar 9
Tribune Xe Pre-Plumb Cylinders 11
Technical Data - Pre-Plumb Cylinders 13
Installation Overview 15
Contents
For over 85 years, Kingspan Range
Tribune has been a leading manufacturer
of premium quality hot water and
heating products for the housing sector.
We have a proven track record of
bringing innovative, high performance
products to the market that stand the
test of time.
Our commitment to achieving ever
higher standards, through a programme
of continued testing and product
improvement, is recognised by our BS
EN ISO 9001:2015 accreditation. This
results in Kingspan products being at the
forefront in terms of performance.
At Kingspan we pride ourselves on a deep
understanding of the challenges faced by
builders, developers and contractors.
Range Tribune product portfolio and
support services such as Kingspan
Service and Coates Design to meet all of
their requirements. That’s
why we are the hot water people they
turn to time after time for solutions to
their hot water and heating needs.
As one of Kingspan Water & Energy’s
premier brands, Range Tribune
of Kingspan Group, a global leader
in high performance building products
for the construction industry. The
overall philosophy of helping to deliver
carbon buildings for the future.
The Hot Water
People
2
Hot Water Energy Storage
Introduction to Kingspan Range 2
Why use Kingspan Hot Water
Cylinders 3
Coates Design Partnership 5
Introduction to Tribune Xe 7
Technical Data - Direct, Indirect
& Solar 9
Tribune Xe Pre-Plumb Cylinders 11
Technical Data - Pre-Plumb Cylinders 13
Installation Overview 15
Why use Kingspan
Hot Water Cylinders?
skills involved in a building project,
with experts in every category. As part of
the Kingspan worldwide building products
unrivalled experience and resources to
support the UK housebuilder with the best
solutions for hot water storage in terms of
legislation compliance, quality standards
and ease of installation.
As the world leader in insulation
technology, we are designing high
insulation coverage and lower heat loss
rates that not only deliver an improved
in smaller spaces.
Importantly, Kingspan Water & Energy
is perfectly tuned into contemporary
lifestyle priorities when it comes to
domestic hot water – comfort, energy
ensure plentiful and constant hot water
supply to suit family homes with baths
and showers, innovative solutions
accommodation, lower energy usage
with associated cost savings, and less
to worry about in terms of repair and
maintenance.
The Range Tribune Xe hot water cylinder
is the latest model in a bestselling series
that is already acknowledged for a
quality assurance in which customers
Water & Energy continues to push the
boundaries in new product development
that meets the needs of new buildings
and the environment, backed up by
experienced design and technical
support teams.
Across the UK, Kingspan Water & Energy
works in partnership with housebuilders,
the very best project support, including
product advice, technical guidance
and training when required. We allocate
a centralised contract management
information and ensure unparallelled
production and supply chain capability.
By working closely with key contractor and
merchant contacts, we can anticipate all
project requirements to meticulously plan
our production and delivery schedules
that guarantee all products arrive on site
in full and on time.
Kingspan Water & Energy also provides
a comprehensive aftercare service from
our nationwide team of engineers for the
full peace of mind of the homeowner,
contractor, and housing developer.
When it comes to delivering
what our customers want, the
top priority is performance -
it’s key to providing maximum
hassle-free installation.
Performance
Range Tribune unvented hot water
cylinders only feature the highest
quality components that are
rigorously tested to ensure
of hot water.
Premium Quality
Our team of technical experts
contains a broad spectrum of skilled
professionals, including engineers
with experience in the construction
industry, accredited system designers,
SAP assessors and people with
practical plumbing experience.
Expertise
ExpertisePremium
Quality
1st
Performance
3
Hot Water Energy Storage
FM 611051
legislation on emissions, BREEAM ratings,
the energy-related products directive
(ErP) and reduced carbon emissions
construction targets have driven the
building industry to seek more and
concerns for the environment and rising
fuel costs mean it’s one of the most
important factors for buyers considering
a new property.
With this in mind, we went back to the
drawing board to reconsider every aspect
of hot water cylinder design and see
where we could make improvements. The
result, after many years of development,
is the all new Range Tribune Xe cylinder.
By going right back to the basics, we
managed to make over 50 improvements
to individual components and production
processes. Each one contributes to an
cylinder, ever.
For example, moving the hot water
outlet from the top of the cylinder to the
side looks, on the face of it, a relatively
small change. Yet, it was one that took
considerable re-engineering.
The reason? A traditional top mounted
outlet - while easier to manufacture -
means having a pipe penetration
through the insulation at the hottest
part of the cylinder. By switching to a
side outlet, the top of the cylinder can
be fully insulated with foam, making for
better heat retention and a more energy
Improved
Eciency
Expansion control is a key part of any
unvented hot water system; it helps
protect the system from excessive
pressure by providing a space for the
water to expand into as it is heated.
The new Xe design features a built-in
thermal expansion space made possible
by moving the hot water outlet to the
side wall.
This ‘air bubble’ at the top of the cylinder
provides additional insulation for extra
installation quicker and easier by
eliminating the need for an external
expansion vessel, freeing up valuable
space in the airing cupboard.
In addition, cylinders with an internal
expansion provide up to 10%more
usable hot water - that’s water
cylinder. This is because the expanded
hot water is held within the cylinder
expanded water from the cold feed.
Built-in Thermal Expansion
30% More Insulation*
As the water heats up it expands
and compresses the air pocket at the
separates the air from the water.
Internal Expansion
Hot Water Energy Storage
* Average insulation shot weight increase measured across the 6 cylinder sizes
Coates Design
Partnership
• Heating System Design
• Hot and Cold Water Services
• SAP Calculations
• Solar Thermal & Photovoltaic
• Air Source Heat Pumps
• District Heating Systems
• MVHR & Air Conditioning
• Rainwater Harvesting
Expertise
Design
Coates Design is a specialist building
services consultancy, within the Kingspan
Group. Through Coates we are proud to
help and advice to ensure that their
systems are designed with the lowest
carbon footprint, whilst helping them
optimise their build costs and achieve
the SAP scores they require.
Expert Design Service
As a key partner to many leading
industry brands such as: Ideal Boilers,
Vaillant Boilers, Glow-Worm Boilers,
Stelrad Radiators, Quinn Radiators,
Danfoss, Honeywell, Pegler Yorkshire and
many others, Coates are often able to
rate or even free, depending on the
FREE
DESIGN
AVAILABLE*
5
Hot Water Energy Storage
Setting the Standards for
Hot Water Storage
SAP
PERFORMANCE
OUTSTANDING
HELPING YOU DELIVER
COST EFFECTIVE BUILDING
SOLUTIONS
6
Hot Water Energy Storage
Introducing
Range Tribune Xe
outstanding SAP performance
Wide range of capacities from
120 to 300 litres
Self-contained expansion space
that acts as an additional
insulator
Gives up to 10%#more usable hot
water
ideal for multiple bathrooms
and powerful showers
Low reheat times for fast
availability of hot water
65mm** of high performance
environmentally-friendly
insulation
Titanium immersion heaters
Duplex stainless steel basic vessel
with superior corrosion resistance
Fully transferable 25-year
guarantee on the basic vessel
and 2 years on components‡
Aesthetically pleasing outer case
The complete package – just add
pipework
Key Features:
Range Tribune Xe is a new generation
of unvented hot water cylinders that
sets the best performance standards
to date for hot water energy storage
through better design, components and
materials. Strongly focused on energy
over 50 new features make the Range
in terms of both energy rating and SAP
assessment.
insulation dramatically improve thermal
30% additional insulation* with a
minimal increase in size and weight.
include a side mounted hot water outlet,
new inlet set and swivel connection T&P
relief valve. In fact, every potential heat
loss factor has been improved.
Range Tribune Xe cylindes are fully
approved with the latest accreditation.
The new cylinder design also makes
handling, installation and commissioning
quicker and easier.
A premium feature of the new cylinder
is internal expansion control using an air
pocket device to maintain pressure when
heat retention characteristics but also
means no external expansion vessel is
needed, resulting in a quicker and more
A bestselling cylinder brand since its
launch in 2001, the proven product
quality backed by our customer service
commitment and in-house design
consultancy make Kingspan Range
hot water storage.
Reduced
Costs
Low Reheat
Times
Model DER
Tribune HE
Tribune Xe 1.16
Technical information
* Average insulation shot weight increase measured across the 6 cylinder sizes
in accordance with BS EN 12897:2016 standard, based on 210L cylinder
** Nominal thickness
‡ See installation instructions for full terms and conditions
7
Hot Water Energy Storage
Solar Indirect
Designed with two indirect heating coils, the primary coil
connects to a solar thermal system and the secondary coil
is connected to a gas or oil boiler, providing heat when there
each cylinder features a 3kW electric immersion heater as a
source.
Capacity
Dedicated
Solar Volume
(L)
Fossil Fuel
Volume
(L)
Immersion
Heaters
(3kW)
Surface Area
Solar Coil
(m
Fluid Content
Solar Coil
(L)
180 55 125 1 0.77
210 65 1 0.86
250 90 160 1 0.86
300 100 200 1 0.96 5.28
Direct
Designed to be heated directly by the built-in high quality 3kW
electric immersion heater, these cylinders heat up quickly and
retain the temperature for a long period. Each direct cylinder
features a secondary backup 3kW electric immersion heater
that can also act as a boost when the primary heater is not on.
Capacity Reheat Time
(Minutes)
Immersion
Heaters (3kW)
120 56 2
150 79 2
180 93 2
210 107 2
250 125 2
300 152 2
Indirect
Designed to heat up rapidly using the heating coil connected
to a gas or oil boiler, the cylinder will retain its heat for long
periods so you can be assured of the most economical system
choice. These cylinders also feature a backup immersion heater
as a secondary heat source that can act as a boost when the
primary heat source is not available.
Capacity Reheat Time
(Minutes)
Coil Rating
(kW)
Immersion
Heaters (3kW)
120 22 19.9 1
150 25 21.9 1
180 28 23.9 1
210 30 23.8 1
250 2
300 23.8 2
F
C2
E
B
C1
A 22mm Cold feed with
bottom of cylinder
B 22m Hot water outlet
C1 Immersion heater with
integrated thermostat
C2 Secondary immersion
heater with integrated
thermostat - Direct
cylinders and 250 and
300 litre Indirect
cylinders only
D1 22mm Boiler coil
connections
D2 22mm Solar coil
connections
valve connection (valve
cylinder)
F 22mm Secondary return
– for cylinders with a
capacity of 210 litres
and above only
G1 Dry stat pocket – solar
control
G2 Dry stat pocket – high
limit
Connections
* Not to be used as the primary heat source on indirect or solar indirect cylinders
A
Technical Data
Range Tribune Xe
Direct Cylinders
8
Hot Water Energy Storage
Boss Centre from floor ErP
Cylinder Type
and Code
Capacity
(Litres)
Height
(mm)
Dia.
(mm
Weight
full
(kg)
A
(mm)
B
(mm)
C1
(mm)
C2
(mm)
D1
(mm)
D2
(mm)
E
(mm)
F
(mm)
G1
(mm)
G2
(mm) Rating
Standing
Loss,
(W)
Load
Noise
Level
(dB)
(%)
kWh/
year
DIRECT
TXD120ERP 120 1000 580 155 179 239 527 n/a n/a NF n/a n/a C L 15 39.3
TXD150ERP 150 1186 580 188 179 832 239 627 n/a n/a 800 NF n/a n/a C M 15 39.0 1315
TXD180ERP 180 1368 580 220 179 1016 239 727 n/a n/a NF n/a n/a C53 L 15 37. 7 2716
TXD210ERP 210 1558 580 252 179 1082 239 827 n/a n/a 1050 1017 n/a n/a C 58 L 15 2735
TXD250ERP 250 1805 580 293 179 1327 239 967 n/a n/a 1295 1262 n/a n/a C 68 L 15 37.0 2766
TXD300ERP 300 2075 580 352 179 1579 239 1118 n/a n/a n/a n/a C72 L 15 39.0 2622
IINDIRECT
TXN120ERP 120 1000 580 NF 306 n/a 610 NF n/a n/a B n/a n/a n/a n/a
TXN150ERP 150 1186 580 189 828 376* NF 336 n/a 796 NF n/a n/a B n/a n/a n/a n/a
TXN180ERP 180 1368 580 223 1012 NF 366 n/a 980 NF n/a n/a B53 n/a n/a n/a n/a
TXN210ERP 210 1558 580 255 1078 NF 366 n/a 988 n/a n/a B 58 n/a n/a n/a n/a
TXN250ERP 250 1805 580 297 521 1323 1096* n/a 1291 1233 n/a n/a C 68 n/a n/a n/a n/a
TXN300ERP 300 2075 580 521 1575 n/a n/a n/a C72 n/a n/a n/a n/a
SOLAR INDIRECT
TXSN180ERP 180 1368 580 225 522 1013 887* NF 337 981 NF 392 1013 B 53 n/a n/a n/a n/a
TXSN210ERP 210 1558 580 256 522 1079 937* NF 897 367 1079 B 58 n/a n/a n/a n/a
TXSN250ERP 250 1805 580 303 522 1007* NF 967 367 1292 1259 C 68 n/a n/a n/a n/a
TXSN300ERP 300 2075 580 350 522 1576 1037* NF 997 1511 1576 C72 n/a n/a n/a n/a
A
C2
C1
D1
D1
A
B
C1
D1
E
G1
D2
G2
D1
F
D2
Supplied with
Two port
valves
22mm
Acetal
tundish
22mm x 15mm
Integrated dual
thermostat#
(Boiler & Immersion)
Inlet control set with
balanced cold
22mm x 15mm
Integrated titanium
immersion heater#
Temperature &
pressure relief valve*
¾" BSP union nut x 15mm
High limit thermostat
NF = Not Fitted* Not to be used as the primary heat source on indirect or solar indirect cylinders
F
B
E
Indirect Cylinders Solar Indirect Cylinders
9
Hot Water Energy Storage
Easy Maintenance
and Installation
TIME
REDUCED
INSTALLATION
PRODUCTS THAT HELP YOU
SAVE YOUR VALUABLE TIME
10
Hot Water Energy Storage
Range Tribune Xe
Pre-Plumb Cylinder Options
2.5 times faster to install than a
regular non pre-plumbed
Pre-plumb Indirect models:
120, 150, 180, 210, 250 & 300 litre
capacity
Pre-plumb Indirect solar models:
180, 210, 250 & 300 litre capacity
Designed with the installer
in mind for a quicker, easier
installation and setup
Seven day programmable room
thermostat with timed domestic
hot water (DHW) control
Separate central heating and hot
water zones
‘A’ Rated EuP-compliant variable
speed circulating pump
Automatic bypass valve for
Connections for vented and
unvented heating primaries
Central heating expansion vessel
pack
Brazed pipework fabrication
Factory assembled for reliability;
reduces costly call-backs and
delays
Consistent electrical and
plumbing layout - neat,
Greater customer satisfaction
Key Features:
We have optimised the layout of the
pre-plumb pipework making it easier
and faster to install the cylinder; the
improved access for the installer.
Tribune Xe pre-plumb cylinders come
with all pipework, inlets and components
installation, straight out of the box. And
it’s now even easier to align and connect
all essential inlet and outlet feeds and
power supplies.
You also get the added protection
of our full guarantee, as the factory
the cylinder. Plus, each unit is pre-
plumbed and pre-wired using high
grade components to deliver exceptional
performance, easy maintenance and
reliability.
Improved
Eciency
Faster
Installation
x2.5 faster
Improved installation eciency
Than installing a regular non pre-plumbed cylinder
with external expansion
70%
See for yourself how simple and quick it is to install and plumb the Tribune Xe by
viewing our time trial video. Simply scan the QR Code here or watch via YouTube at:
Kingspan Range Tribune Xe Time Trial
11
Hot Water Energy Storage
Capacity Reheat Time
(Minutes)
Coil Rating
(kW)
Immersion
Heaters (3kW)
120 22 19.9 1
150 25 21.9 1
180 28 23.9 1
210 30 23.8 1
250 2
300 23.8 2
Technical Data
Pre-Plumb Cylinders
Pre-Plumb Solar Indirect
Designed with two indirect heating coils, the primary coil
connects to a solar thermal system and the secondary coil is
connected to a gas or oil boiler, providing heat when there is
features a 3kW electric immersion heater as a secondary backup.
Pre-Plumb System-Fit Indirect
These cylinders have been optimised for use with system boilers
with no circulating pump, robokit or programmer. As with the
standard Xe indirect, it heats up rapidly using the heating coil
connected to a gas or oil system boiler. The cylinder will retain
its heat for long periods and features a backup 3kW immersion
heater as a secondary heat source that can act as a boost
when the primary heat source is not available.
Pre-Plumb Indirect
Designed to heat up rapidly using the heating coil connected
to a gas or oil boiler, the cylinder will retain its heat for long
periods. The cylinder also features a backup immersion heater
as a secondary heat source that can act as a boost when the
primary heat source is not available.
Connections
Pre-Plumb System-Fit Indirect
A 22mm Inlet control set –
cold feed
B 22mm Hot water
D 22mm Secondary return
(210L, 250L & 300L only)
E 28mm Flow from boiler
F 28mm Return to boiler
G 22mm Central heating
(Single zone)
H 22mm Central heating
(Twin zone)
I 28mm Central heating
return
J DHW two port valve
K Immersion heater &
dual thermostats (not
to be used as the
primary heat source)
M Wiring centre
N Circulating pump
models)
O Manual bottle air
eliminator
P Auto bypass valve
Q Cold feed drain
R1 Dry Stat pocket – Solar
R2 Dry Stat pocket – High
limit
S 22mm Solar coil
connections
D
O
C
B
GE
H
J
M
F
I
Q
P
L
A
K
12
Hot Water Energy Storage
Capacity
Dedicated
Solar Volume
(L)
Fossil Fuel
Volume
(L)
Immersion
Heaters
(3kW)
Surface Area
Solar Coil
(m
Fluid Content
Solar Coil
(L)
180 55 125 1 0.77
210 65 1 0.86
250 90 160 1 0.86
300 100 200 1 0.96 5.28
Capacity Reheat Time
(Minutes)
Coil Rating
(kW)
Immersion
Heaters (3kW)
120 22 19.9 1
150 25 21.9 1
180 28 23.9 1
210 30 23.8 1
250 2
300 23.8 2
ErP
Cylinder Type
and Code
Ca-
pacity
(Litres)
Height
(mm)
Dia.
(mm)
Weight
full
(kg)#
Rating Standing
Loss, (W)
SYSTEM FIT
TXN120PSBERP 120 1000 580 B
TXN150PSBERP 50 1186 580 199 B
TXN180PSBERP 180 1368 580 233 B 53
TXN210PSBERP 210 1558 580 265 B 58
TXN250PSBERP 250 1805 580 307 C 68
TXN300PSBERP 300 2075 580 356 C 72
IINDIRECT
TXN120PERP 120 1000 580 B
TXN150PERP 150 1186 580 199 B
TXN180PERP 180 1368 580 233 B 53
TXN210PERP 210 1558 580 265 B 58
TXN250PERP 250 1805 580 307 C 68
TXN300PERP 300 2075 580 356 C 72
SOLAR INDIRECT
TXSN180PERP 180 1368 580 235 B 53
TXSN210PERP
210 1558 580 266 B 58
TXSN250PERP
250 1805 580 313 C 68
TXSN300PERP
300 2075 580 360 C 72
Pre-Plumb Indirect
Pre-Plumb Solar Indirect
Supplied with
Auto by-pass
valve*
TPOne M - Two channel
programmable room
thermostat with DHW
Filling
loop*
Circulating
pump*
High limit
thermostat*
For Twin zone models add ‘T’ after the ‘P’ in the code, e.g. TXN120PSBERP becomes TXN120PTSBERP NF = Not Fitted
# Including 10kg added for pre-plumb
J
G
C
D
NS
S
R1
H
Q
E
F
I
A
P
D
O
C
B
GE
H
J
M
F
I
Q
P
L
A
N
K
R2
B
O
M
L
Two port
valves*
22mm
Acetal
tundish*
22mm x 15mm
Integrated dual
thermostat*
(Boiler & Immersion)
Inlet control set with
balanced cold*
22mm x 15mm
Integrated titanium
immersion heater*
Temperature &
pressure relief valve*
External expansion
vessel (Heating)
TPOne B - Programmable
room thermostat
(twin zone only)
K
13
Hot Water Energy Storage
Download our Tribune Xe Pre-plumb
layout showing components position
and angles, that’ll help you prepare
the pipework for the installation.
Simply scan the QR Code here to
download:
Choosing the Right Cylinder
Recommendations are based on the guidelines in BS 6700.
Guidance should be sought for unusual applications,
Domestic Selection Guide
Hot water demand Bedrooms Indirect cylinder
capacity (litres)
Direct cylinder
capacity (litres)
1 standard bath
or shower
Bedsit/1 bed 120 150
2-3 bed 120 180
150 210
1 standard bath 2-3 bed 120 180
150 210
1 bath and
en-suite
2-3 bed 150 210
150 210
180 250
2 standard baths
2-3 bed 180 210
180 210
210 250
3 bathrooms
250 300
250 300
5-6 bed 300 300
Recommendations based on the guidelines in BS 6700.
Guidance should be sought for unusual applications,
Commercial Selection Guide
Typical commercial application Indirect units
2 x 210
2 x 300
Small Hotel - 8 bed /8 bathrooms 3 x 210
2 x 300
Sports Pavilion ( 25 people /6 showers ) 3 x 210
Student House ( 25 people / 3 bathrooms ) 3 x 300
Old People’s Home ( 60 beds /10 bathrooms) 5 x 300 each
Example illustration
A swimming pool has 5 showers in each of 2 changing rooms.
23
rds
of this will be hot water). There are up to 8 lessons per day,
Maximum demand = 10 shower heads x 6 litres /min. = 60 litres /min,
rate graph).
At least 3 Tribune Xe’s will be needed to provide this:
Total demand = 30 children x 6 litres /minute x 5-minute shower each
= 900 litres
Therefore, 3 x 300 litre units will be required.
with a boiler power of 20kW. So total boiler power required = 60 kW.
Guidance for Linking Cylinders
of storage are required, two or more Tribune Xe units can be
linked in parallel.
When linking two cylinders, a separate cold feed is taken to
available doubles (subject to the cold mains).
The demand for hot water will vary considerably between types
of buildings and the activities taking place there.
Using cylinders in parallel
IMPORTANT NOTE:
It is a requirement of building regulations that any heat
sources connected to an unvented cylinder are under full
thermostatic control and are able to turn themselves
Hot Water Energy Storage
For Example:
A factory production line will have a peak demand at the
breaks in the shift or at the end when the workforce may all
want to wash their hands simultaneously.
A sports pavilion will need to be able to provide large quantities
of hot water for the teams’ showering needs over a short
period of time after the game.
So your selection must take into account a number of things:
• The maximum simultaneous hot water demand
• The total hot water demand required
• The required system reheat time
Materials
Inner shell - Duplex Stainless Steel
Coil - 22m Diameter Stainless Steel
Bosses - Stainless Steel
Every Tribune Xe is water tested to a pressure of 15 bar.
Casework
Toughened case coating to protect and provide pleasing
aesthetics.
Insulation
Polyurethane foam, nominal thickness 65mm. The foam is
CFC-free & HCFC-free. It has an Ozone Depletion Potential of
Zero and a Global Warming Potential of 3.1.
Control Settings
Pressure Reducing Valve 3.0 Bar
Expansion Relief Valve 8 Bar
Pressure and Temperature Relief Valve 10 Bar/90ºC
High Limit Cut-Out in Dual Thermostat 85ºC
Immersion Heater
1 1
Brazed Construction
Approvals
KIWA Approved to Building Regulations G3 & L.
UKCA & CE Compliant.
Installation Overview
Fittings as Standard
Direct Indirect Solar Indirect
Inlet Control Set
Temperature & Pressure Relief Valve
15mm/22mm Tundish
Primary 3kW Immersion Heater
Secondary 3kW Immersion Heater 250L & 300L Units
1x Two-Port Valve
1x Dual Thermostat Integrated into
Immersion Heater
1x Single High Limit Stat
2x Sensor Pocket Retaining Bungs
Installation & Maintenance Manual
Including Benchmark Log
Regulations
All unvented units with a capacity over 15 litres must be
installed by a competent installer in accordance with
the following Regulations: England and Wales – Building
Regulations G3, Scotland – Technical Standard P3, N. Ireland –
Building Regulations P5.
Siting
With no header tanks to consider, Tribune Xe units can be sited
almost anywhere in the house. The side mounted hot water
outlet enables the cylinder to be installed under shelving or
other equipment.
Tribune Xe can supply outlets both above and below its
location.
of holding its (full) weight.
Water Supply
An adequate mains water supply is vital to ensure Tribune
Xe delivers the high performance of which it is capable. We
litres/min.
Compatible Boilers
thermostat and cut-out.
Any heat source that lacks full thermostatic control such as
most solid fuel boilers, Agas, Rayburns and Stanleys cannot
normally be connected to any unvented system.
The primary circuit may be open vented or sealed (operating at
up to 7 bar). The primary circuit must be pumped.
Secondary Return
250 and 300 litre sizes. A swept tee (not supplied) may be used
to provide a secondary return on the smaller sizes.
Electrical Wiring
Controls should be wired to the boiler /programmer etc. in
accordance with the control scheme being used.
Although compatible with Y, W or S Plan layouts, Tribune
Xe units are best suited to installation as an S Plan since
we already supply one of the two port valves necessary, so
reducing installation costs compared to other plans.
Each immersion heater must have a permanent connection via
a double-pole linked isolating switch with a minimum rating of
13 amps.
All electrical wiring must comply with the latest IEE wiring
regulations.
• To supply products that meet, or exceed, appropriate standards and building and water regulations.
• To provide pre and post sales technical support.
• To provide clear and concise warranty details to customers.
’HWA’ members are independently audited to ensure independent governance supports the Charter
principle of being clear and honest; not only do members have to comply with the Charter standards,
they also have to show an external accreditor how they do it.
For more information visit www.hotwater.org.uk
As a Charter member of the
Hot Water Association (HWA),
Kingspan Water & Energy is
committed to uphold the principles
and objective of the ’HWA’ Charter:
15
Hot Water Energy Storage
KingspanWaterandEnergy
@KingspanWatEner
TheKingspanWaterEnergy
We take every care to ensure that the information in this document is accurate at the point of publication.
Dimensions may vary (within a small parameter) due to manufacturing process variations or environmental
conditions. All images are for illustration purposes only and, along with dimensions, should not be taken as binding.
To ensure you are viewing the most recent and accurate product information, please visit this link:
https://www.kingspan.com/gb/en-gb/products /hot-water-cylinders
®Kingspan and the Lion Device are Registered Trademarks of the Kingspan Group in the UK, Ireland and other
Contact Details
UK
Kingspan Water & Energy Ltd.
West Yorkshire | WF1 5QU
kingspancylinders.com
This manual suits for next models
17
Table of contents
Other Kingspan Water Heater manuals
Kingspan
Kingspan RHINO RT-25 User manual
Kingspan
Kingspan AUXD120 User manual
Kingspan
Kingspan Range Tribune HE Series Installation and operating instructions
Kingspan
Kingspan Tribune Instruction Manual
Kingspan
Kingspan Tribune HE Range User manual
Kingspan
Kingspan AquaBank User guide
Kingspan
Kingspan Tribune HE Range Installation and operating instructions
Popular Water Heater manuals by other brands
ThermoFlow
ThermoFlow DS 5 U Installation & user's instructions
Takagi
Takagi T - M1 Installation and operating instructions
Ariston Thermo
Ariston Thermo FLAT PW manual
Apricus
Apricus AP315GL336 Owner's guide and installation manual
Lochinvar
Lochinvar POWER-FIN PF0501 Designer's guide
Gorenje Tiki
Gorenje Tiki TC 200-300 ZBR Instructions for use
Bradford White
Bradford White CHP-I&S-01 Installation and service manual
flamco
flamco Flexcon VSV Installation and operating instructions
FF Europe
FF Europe ELKESS-A-100L Original instruction manual
State Water Heaters
State Water Heaters SandBlaster SBD71 120 Service handbook
clage
clage MCX 3 Operating and installation instructions
BTC
BTC SST150-40 Installation and operating manual
