KIOT RED User manual

KIOT RED
Product Manual
Version 1.0

KIOT Red is a universal, portable, smart remote that lets you control
almost all your electronic homeappliances with just a tap on your
smart phone app. It fits into any USB adapter & connects to your Wi-
Fi. Place it anywhere in your room & control your appliances.

Setup - A quick walk through
Step 1 : Set up your
KIOT App
PREREQUISITES :
• Please ensure that your phone is connected to your home Wi-Fi
network with internet connectivity for proper installation & activation.
• USB Adapter
• Warranty card
1.1
Download the KIOT app from the
Google Play Store or the App store.
Signupbycreatingyouruseraccount.
From the next time onwards, you
can log in using your username &
password credentials.

Step 2 : Add your
home to the KIOT app
2.1
Open your KIOTapp.Underthewelcome
message, click on New Home to add
your home. Give it a name of your choice
and add it. You will be navigated to your
new home dashboard.
Step 3 : Link your KIOT Red
to your home network
3.1
Switch on your KIOT Red by
connectingittoanypowered
USB port in the designated
room.
You will notice an intermittent
red blinking light from inside.
Light Pattern :

3.2
Now in your home tab click on ‘Add Device’.
(You will be navigated to Settings > Devices )
3.3
Tap on the + button and you will see 2
options. You can either scan the QR code
or manually enter the Device ID. Both the
QR code & the Device ID are displayed on
the product as well as the warranty card.
Click on next.

3.4
You will be navigated to the ‘Configure’
page. Now switch off your cellular data
on your phone. Go to settings > Wifi and
connect your phone to the Wi-fi network
with the name “kiot_red_(your device id)”.
3.5
Navigate back to the KIOT app page,
select the check box at the bottom of
the page, Tap on Next. Now you will be
directed to the configuration page. All
available Wi-Fi networks will be displayed
.Select your home network from the
available networks and connect to it.
Make sure that you connect phone and
your KIOT RED to the same network.
A red and green blinking pattern when
the configuration process starts.
Light Pattern :

3.6
Once the configuration is finished, you
can name your KIOT Red, and assign a
room(give your designated room any
name) to which you can link your device.
If the configuration is failed, a ‘Failed
process’ pop up appears and you can
click on the ‘retry’ option
Green blinking light on successful
configuration.
Light Pattern :
Step 4 : Add a remote
to your KIOT Red
4.1
In your home, go to settings tab > Remotes.
With the + button, you can add a new virtual
remote for any appliance in your room. From
the drop down menus choose your room
name, your KIOT Red name, Appliance type
(like AC, TV ) whose remote you want to
create and give it a name.

4.2
Next, select its brand name and choose
your remote type. You can select ‘Start
Automatic Firing’ to automatically choose
theremotethatfitsyourappliance.Ifallthe
buttons are responding, you can select
‘Get this remote’. You can also manually
choose a remote by testing all the remote
options on each remote. Choose the
remote if your device responds to all the
remote keys.
4.3
Once done, select configure and save
remote.(If none of the remotes are
compatible,youcancontactusatsupport@
kiot.io and we will reach out to you)

Step 5 : Start using
your KIOT remote
5.1
Go to Remotes tab on your home
dashboard, select the remote of the
given appliance and get started on
your smart home journey!
(TIP: If you do not have/forgot your device id during installation, click
on ‘I don’t have/forgot device id’ on the bottom of the page in step 3.3,
select Device type as KIOT Red and proceed to step 3.4 as before.)