Digital industrial charge amplier Type 5074A
5074A_002-818e-06.18Page 2
Content
1. Introduction .................................................................................................................................4
1.1 For your safety....................................................................................................................5
1.2 Electromagnetic compatibility (EMC)..................................................................................5
1.3 Warnings and their relevance .............................................................................................5
1.4 Disposal instructions for electrical and electronic equipment .............................................6
1.5 Software upgrades and updates.........................................................................................6
2. Fundamentals..............................................................................................................................7
2.1 Piezoelectric measurement ................................................................................................7
2.2 The industrial charge amplier ...........................................................................................9
3. Description of the Type 5074 charge amplier.......................................................................10
3.1 Block diagram...................................................................................................................11
3.2 Dimensions.......................................................................................................................11
3.3 Ordering information.........................................................................................................12
3.3.1 Included accessories...........................................................................................12
3.3.2 Accessories (optional).........................................................................................12
4. Commissioning .........................................................................................................................14
4.1 Installation ........................................................................................................................14
4.1.1 Connecting sensors.............................................................................................14
4.1.2 Led Codes...........................................................................................................15
4.1.3 Network and power connection...........................................................................15
4.1.4 EMC and ground loops........................................................................................16
4.2 PLC integration.................................................................................................................17
4.2.1 Channel operation (cyclic communication)..........................................................19
4.2.1.1 Cyclic operation parameters ................................................................20
4.2.1.2 Cyclic measurement data ....................................................................21
4.2.1.3 Cyclic status bits ..................................................................................22
4.2.2 Error codes..........................................................................................................23
4.2.3 Channel conguration (acyclic communication)..................................................24
4.2.4 Advanced features description............................................................................27
4.2.5 EtherCat (integration into TwinCat 3, beckhoff)...................................................28
4.2.5.1 Startup parameters ..............................................................................28
4.2.5.2 Available PDOs....................................................................................29
4.2.5.3 Conguration during operation ............................................................30
4.2.5.4 EtherCat parameter objects.................................................................30
4.2.5.5 LED Codes ..........................................................................................32
4.2.6 ProNet (integration into TIA portal, Siemens) ....................................................32
4.2.6.1 Available modules................................................................................32
4.2.6.2 Records ...............................................................................................33
4.2.6.3 IRT .......................................................................................................34
4.2.6.4 Pronet parameter indexes..................................................................34
4.2.6.5 LED Codes ..........................................................................................35
