KitchenAid KWCU405S Parts list manual

Example Vent System
90º elbow 6' (1.8 m)
2’
(0.6 m)
Wall cap
PRODUCT MODEL NUMBERS PRODUCT DIMENSIONS
INSTALLATION DIMENSIONS
VENTING REQUIREMENTS
KWCU405S
KWCU465S
Electrical: 120-volt, 60-Hz, AC-only, 15-amp,
fused electrical curcuit is required. Use copper
wire only.
36" (76.2 cm) Range Hood
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Ref. W10140616
09-11-08
®
Maximum length = 35' (10.7 m)
1 — 90° elbow = 5' (1.5 m)
8' (2.4 m) straight = 8' (2.4 m)
1 — wall cap = 0' (0 m)
system length = 13' (3.9 m)
Note: Flexible vent is not recommended. Flexible vent
creates back pressure and air turbulence that greatly
reduce performance.
Vent system can terminate either through the roof or
wall. To vent through a wall, a 90° elbow is needed.
Vented installations
Note: The range hood chimneys are
adjustable and designed to meet varying
ceiling or soffit heights depending on the
distance “X” between the bottom of the
range hood and the cooking surface. For
higher ceilings, a 40" (101.6 cm) Chimney
Extension Kit Part Number 8212710
(Stainless Steel), 8212711 (White), or
8212712 (black) is available from your
dealer or an authorized parts distributor.
The chimney extension replaces the upper
chimney shipped with the range hood.
Important:
Minimum distance “X”: 24” (61.0 cm)
Suggested maximum distance “X”: 30”
(76.2 cm)
For vented installations, the chimneys can
be adjusted for ceilings between 7' 6-3/8"
(2.30 m) and 9' 0" (2.74 m).
For non-vented (recirculating) installations,
the chimneys can be adjusted for ceilings
between 8' 3-3/8" (2.45 m) and 9' 5-1/4"
(2.88 m).
30" (76.2 cm)
36" (91.4 cm)
22" (55.9 cm)
Min 27¹⁄₂" (69.8 cm)
Max 36¹⁄₂" (92.7 cm)
21¹⁄₄" (54.0 cm)
1¹⁄₄"
(3.2 cm)
3¹⁵⁄₁₆"
(10.0 cm)
10¹⁄₄" (26.0 cm)
11¹³⁄₁₆" (30.0 cm)
18" (45.7 cm) min.
clearance upper
cabinet to countertop
X*
36" (91.4 cm)
countertop height
See Note
30" (76.2 cm) or 36" (91.4 cm)
cabinet openingwidth
(if installed between cabinets)
Roof Venting Wall Venting Non-vented
(recirculating)
A. Roof cap
B. 6" (15.2 cm)
round vent
A. Wall cap
B. 6" (15.2 cm)
round vent
A. Deflector
B. 6" (15.2 cm)
round vent
A
A
B
B
B
A
6" (15.2 cm) roundVent piece
45° elbow 2.5'
(0.8 m)
90° elbow 5.0'
(1.5 m)
To calculate the length of the system you need, add the
equivalent feet (meters) for each vent piece used in the
system.
Maximum equivalent vent length is 35' (10.7 m).
30" (76.2 cm)
36" (91.4 cm)
22" (55.9 cm)
Min 32" (81.3 cm)
Max 38¹⁄₈" (96.8 cm)
22"
(55.9 cm)
1¹⁄₄"
(3.2 cm)
3¹⁵⁄₁₆"
(10.0 cm)
10⁵⁄₈" (27.0 cm)
12" (30.5 cm)
12¹⁄₂"
(31.8 cm)
5"
(12.7 cm) 3¹⁄₂"
(8.9 cm)
Non-vented (recirculating) installations