PRODUCT MODEL NUMBERS OVERALL DIMENSIONS
VENTING REQUIREMENTS
KWVU205Y
KWVU265Y
Electrical: 120-volt, 60-Hz, AC-only, 15-amp.
electrical supply. Use copper wire only. A time-
delay fuse or circuit breaker and separate circuit
is recommended.
30" and 36" Slide-out Vent System
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Ref. 4360365 Rev. C
08-08-02
®
3/8"(9.5 mm)
BACK OF
VENT HOOD
FRONT OF
VENT HOOD
3-1/4"(8.3 cm)
4-3/8"
(11.1 cm)
10"
(25.4 cm)
30"(76.2 cm) model: 8"(20.3 cm)
36"(91.4 cm) model: 11"(27.9 cm)
30"(76.2 cm) model: 26"(66.0 cm)
36"(91.4 cm) model: 32"(81.3 cm)
30"(76.2 cm) model: 29-7/8"(75.9 cm)
36"(91.4 cm) model: 35-7/8"(91.1 cm)
66"(167.6 cm) maximum distance from upper
cabinet hood mounting surface to floor
24"(61 cm) minimum distance from underside
of range hood to cooking surface or countertop
15"(38.1 cm) minimum upper cabinet height
13"(33 cm) upper cabinet depth
30"(76.2 cm) model: 13"(33.0 cm)
36"(91.4 cm) model: 16"(40.6 cm)
9-1/2"
(24.1 cm)
glass shelf
extends
7"(17.8 cm)
8"
(20.3 cm)
9-1/8"
(23.2 cm)
11"
(27.9 cm)
1"
(25.4 mm)
1-5/8”
(41.3 mm)
1-1/4"
(31.8 mm)
1-7/16"
(3.6 cm)
1/4"
(6.4 mm)
2"
(5.1 cm)
5/8"to 2-1/8"
(1.6 cm to 5.4 cm)
2"
(5.1 cm)
2-3/8"
(6.0 cm)
Roof venting
3-1/4
"
x 10
"
(8.3 cm x 25 cm)
vent through
the roof
Wall venting
3-1/4" x 10"
(8.3 cm x 25 cm)
vent through
the wall
wall
cap
3-1/4" x 10”
(8.3 cm x 25 cm)
90° elbow
wall
cap
Maximum length = 26 ft. (8 m)
1 — 90° elbow = 5 ft. (1.5 m)
9 ft. (2.8 m) straight = 9 ft. (2.8 m)
1 — wall cap = 0 ft. (0 m)
Length of 3-1/4" x 10"
(8.3 cm x 25 cm)
system = 14 ft. (4.3 m)
6 ft. (1.8 m)
3 ft.
(0.93 m)
3-1/4" x 10"
(8.3 cm x 25 cm)
v
ent system
Recommended vent system length
Use 3 1/4" x 10" (8.3 cm x 25 cm) vent with maximum length of
26 feet (8 m) for vent system. For best performance, use no more
than three 90° elbows. To calculate the length of system you need,
add the equivalent feet (meters) for each vent piece used in the
system. See the following example.
Recommended
standard fittings
3-1/4" x 10"
(8.3 cm x 25 cm)
90° elbow
= 5 ft. (1.5 m)
3-1/4" x 10"
(8.3 cm x 25 cm)
flat elbow
= 12 ft. (3.7 m)
3-1/4" x 10"
(8.3 cm x 25 cm)
wall cap
= 0 ft. (0 m)
