KiWi Lighting BY-CON-TC24GC User manual

2
.
4G
T
ouc
h
S
creen
RGBW
LED
C
ontro
l
S
ystem

Welcome to use Touch Screen RGBW LED Control System,please read the instruction
carefully before using.
I .Product Description
This system is a high-performance RGBW LED touch remote controller, adopting the most
advanced PWM control technology, controlling all RGBW LED products with Five lines and four
circuits( common anode),owning 640 thousand colors and 20 automatical changing modes to
choose.
Also, It has the memory function(that is to say, the previous settings will be resumed when power
on again). It is widely used in LED RGBW LED strip light, LED module and so on.
With the technology of the 2.4G high frequency wireless remote control, it has the the
characteristics of low power consumption, long distance transmission, and strong anti-interference
ability ,high speed telecommunications, etc.
The remote looks fashionable and elegant , with simple and practical functions of color changing
and brightness dimming, the capacitive touch screen design makes the remote easy to use .
The modular design and easy screwed terminals enable the controller easy to match with all kinds
of LED light products.

II. Technical Data
Remote
Size 110×52×20mm
Power AAA×2
Material ABS
Fabrication processing Multicolor printing & UV varnish
Controller
Size 85×45×23mm
Working voltage 12V～24V
Control way R G B W four channels
Max load per channel 6A
Output Connection Common anode
Telecontrol distance 20--30 meters
Programs 20 kinds
III. Function of keys

IV. Program List
Numbe
r
Mode Brightness
State
Speed State Remark
1Static white color Adjustable Unadjustable White only
2Color /white static coexistAdjustable Unadjustable Color ring free to
choose,
Brightness adjusts
color light only
3All colors gradual change Adjustable Adjustable White (off )
4Four colors gradual change Adjustable Adjustable
5Four colors jump to change Adjustable Adjustable
6Seven colors jump to change(with
white color)
Adjustable Adjustable
7Red/white jumps to change Adjustable Adjustable
8Blue/white jumps to change Adjustable Adjustable
9Green/white jumps to change Adjustable Adjustable
10 Red jumps to change Adjustable Adjustable
11 Blue jumps to change Adjustable Adjustable
12 Green jumps to change Adjustable Adjustable

V.Programming(code clearing and code matching )
Code matching :
For a new kit ( remote& controller), the remote can work only when it is programmed to the
controller.
Please follow the below instructions:
Correctly connect the power supply, LED controller and LED load.
Switch off the power, then switch on again, and press key 5 once (within 3 seconds)
the moment you see the light is on.The LED light blinks three times slowly when it is done.
Code clearing :
The code can be cleared as needed.
The kit (remote and controller) will stay in the original state after code clearing.
It can work when code rematching is done.
Please follow the below instructions:
Also, Correctly connect the power supply, LED controller and LED load.
Switch off the power, then switch on again, and long press key 5(within 3 seconds)
the moment you see the light is on.The LED light blinks six times swiftly when it is done.
Attention:
1.The regular product for sale is a kit (remote and controller).
The user can re-programme freely as needed. One remote can control countless controllers, but
one controller can only be controlLED by four remotes (Max).

2.Please check the battery installation and controller(totally discharge the power), when you
programme after switching off and switching on.
VI.Connection:
VII. Attention
1.Please check whether the input voltage of the constant voltage power supply is in accordance
with the controller, and please check the connection of both the cathode and anode, otherwise the
controller will be broken.
2.Please don’t connect wires with power on.
Please switch on again only when it is in right connection and no short circuit.
3.Please keep your figure off the touch ring when installing the batteries, to improve its
sensitivity,and use the remote ( 3 seconds later) after the batteries are instalLED.
Please reinstall the batteries, if the touch ring is found low-sensitivity.
4.Please do not use the controller in the place with widely range metal area or strong
electromagnetic wave nearby, otherwise,the remote distance will be seriously affected .