KJB PRO-10G User manual

PRO-10G
Thank you very much for your PRO-10G purchase.
Please read this user manual carefully before using in order to
understand all functions and use properly. Be sure to keep this user
manual in secure possession for future reference

Name of each part & Composition of the product
<PRO-10G MAIN BODY>
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
⑫
⑬
⑭
Tel. Line Adapter
Headphone

4
5
6
7
8
9
3
Headphone: Jack for connecting to Headphone
Power Switch
Speaker out: It is used when White Noise sound is put out to
external speakers (can be purchased seperately)
Tel out: Jack for connecting to the phone
Tel in: Jack for connecting to the telephone line
Horizontal Bar Graph Display: RF Signal Strength Meter
RF warning: Light is ON when the wireless signal is transmitting
TEL warning: Light is ON when the phone is being wiretapped
Homing switch: The Homing switch functions to decrease
sensitivity allowing user to find an accurate location of
any wireless listening or transmitting device within range.
10.
11.
12.
13.
RF alarm: Light is ON when RF Signal Mode is operating
Noise: Light is ON when Noise Generator is operating
Telephone: Light is ON when Telephone Feature is operating
Speaker: Light is ON when the built-in speakers work
14.
Speaker mode

1. Turn on
the switch
How to operate
1. Silence Detection: can detect the wireless wiretaps and
wireless cameras by using only LED sensitive display
2.Sensitivity
display LED (10
Levels) works
3. Move towards direction
of display as sensitivity
indicating LED (10
Levels) Strength Meter
①If sensitivity becomes level 10, Wireless Tapping Device may be
indicated and confirmed nearby.
②Note, wireless camera may be around that area. Search area
with naked eye and then check whether there is pin hole lens
or not.(Wireless spy camera tapping device)
1. For Detecting all "wireless transmitting
devices" &/or "wireless transmitting
spy cameras" within detection range

③The Homing switch functions to decrease sensitivity allowing user
to easily find an accurate location of any wireless transmitting
listening or recording device.
Usage
a. Press once: reduces sensitivity---allowing for more accurate
sweep and enables to find an accurate location of any wireless
transmitting listening or wirelesss camera device.
b.
To return to Normal Mode: Press once again and this
returns device to original default state of sensitivity.
④
NOTE: There is a case where the sensitivity indication LED of
PRO-10G is still turned on even after call of the mobile phone is
completed. This is caused by communication between the mobile
phone and the communication company for 0~20 seconds.
The PRO-10G is so sensitive that the display window can be
displayed at a very short moment of electronic wave.
NOTE: Pro-MAX 10G Detects all of the following kinds of bugging devices:
- ALL GSM Bugs including Baby-Monitors/GSM Alarm/GSM Bugs
- ALL Cellular GSM/GPRS/EDGE/3G/4G Video Cameras & Listening Bugs
- ALL Transmitting Spy Phones
- ALL GPS Trackers while Transmitting
- ALL Bluetooth Active Bugging Devices
- ALL Spy Phones with Active Bluetooth/Wi-Fi
-ALL Wireless Transmitting Video Cameras up to 5.8 Ghz
PRO-10G has Detection range up to 35-40 feet depending on Power of Transmitting source

2. Detection using RF alarm feature
●It works exactly as #1 Silence Detection, though Speaker now Alerts
●When getting closer to wireless signal the sound beeps (faster).
When it is very close to the wiretaps the "beep" sound is heard.
1.Turn on
the switch
2.Press button 1
in the speaker mode
3. RF Alarm speaker
LED is on mode
4. Detection
starts
The Homing switch functions to decrease detector sensitivity and
helps find an accurate location of a wireless transmiting device.
Usage
a. Pressing Once reducessensitivity--- enablesuser to find an
accurate location of any wireless transmitting device.
b. Press once again and this --returns unit to
original state of sensitivity.

●It works together with #1 Silence Detection. It detects while listening
with headphone, As it is closer to wiretaps the sound varies (faster).
When it is very close to it the "beep" sound is heard.
1.Turn on
the switch
2. Insert Headphone
Jack into
Headphone hole.
3. Detection
starts
The Homing switch functions to decrease detector sensitivity and
helps find an accurate location of a wireless transmiting device.
Usage
a. Pressing Once reduces sensitivity--- enables user to find an
accurate location of any wireless transmitting device.
b. Press once again and this --returns unit to
original state of sensitivity.
3. Detection using Headphone

1.Turn on
the switch
2. Press the
speaker mode
button twice
3. Noise and
speaker’s
LEDs are on.
4. Built-in speaker
makes "shhhh" sound.
5.Adjust the volume
using volume-up-
&-down buttons
Adjust noise volume properly not to be harsh to ears so much. However,
if the volume is louder, tapping prevention is better and more efficient.
When using for laser tapping prevention, place the device close to window
and direct the speaker face to window.
During your conversation, please speak with lower volume than noise
feature for Maximum protection.
If you want a little louder noise, external speakers could be connected to
the speaker-out on the side of the product by plugging in the external
speaker's Jack. External speaker can be purchased at any electronic store.
Audio Tapping prevention mode
Used for preventing wire/wireless tapping, laser tapping,
recording by voice recorder, recording by tape recorder,
tapping by parabolic reflector, tapping by hidden tapping device
in wall.
4. Noise Function

Use for detecting and preventing wire telephone tapping device
on cable and illegally bridged.
1. Check and prepare 2 types of telephone cables and cable connector bundled together.
2. Disconnect the telephone cable from the telephone you want to search.
3. Open the rubber cover on the side of PRO-10G.
5. Telephone tapping detection and prevention

Connect the disconnected telephone cable in above step”2.” to cable connector as
shown in the picture.
Connect the other end of the black cable which is connector to the TEL IN terminal
on the PRO-10G as shown in the picture.
Connect one end of the white cable to TEL OUT terminal on the PRO-10G and
the other end to inlet terminal of the telephone that you disconnected in above step
“2” in order to search.
In this case, if a person named ‘C’,unlawfully tries to listen to a telephone
communication between PRO-10G holder and a person named ‘B’, when the
PRO-10G holder is having a telephone communication with the person ‘B’, the
telephone of PRO-10G holder is STOPPED and cannot transmit or receivecalls while
phone line is actively tapped by person named 'C', and the person ‘B’ and the person
‘C’ will hear a warning sound of “zzzz”. At this time, the warning LED is lighted on or
blinks. No calls can be tapped under this scenario.
Radio Frequency
Gain : 20dB
Response : 10Mhz~10Ghz
Display:
LED supported by 10 levels
Main power supply :
6LF22 Alkaline battery
Manufacture : DSE Company
Made in Korea
Specification
PRO-10G

b
Manufacturer assumes no liability if instructions are not followed

Do not touch the body of the device when there is lightning and
thunder. It may cause electric shock by lightning.
1

1
1