Kkmoon BT14 User manual

U S E R M A N U A L
2x2 TV WALL CONTROLLER
Enjoy the vivid world!

Introduction
2x2 tv wall controller
The 2x2 tv wall controller , support 1-way HDMI input and 4 HDMI output, the main function is to
divide a complete HDMI,HD image signal into 4 blocks and assign to 4 video display unit (such
as Rear projection unit, LCD TV, etc.), Complete with 4 HDMI high-definition video display units
to form a large dynamic image screen.
Support modes

Features
*Support 1 HDMI input
*Support input HDMI1.3
*Support 4 HDMI outputs
*Support input 1920x1080P,24/30/50/60HZ,and lower resolution
*Support output resolution 1920x1080P
*Support multiple splicing modes, easy to operate, plug and play
Physical interface diagram
OUTPUT → HDMI Signal Output
INPUT → HDMI Signal Input
DC/12V → Power Adptor Input
IR → Remote Receiver
LED → Power Light
Audio → Audio ON or OFF
Mode → Different Mode Switch
→ Current Mode Screen Order Switch

Remote controller

Operation steps
STEP 1: Connect hdmi source to hdmi input with HDMI cable,connect hdmi
output to TVs.
STEP 2: Connect 12V power adaptor.
STEP 3: Set up splicing mode by the MODE button on the unit or remote
controller.
The Package includes
1. 2X2 tv wall controller x1
2. Power adapter x1
3. User Manual x1
Connection operation

用 户 手 册
2X2 多屏拼接处理器
享受生动世界！

简介
这款2X2拼接器,支持1路HDMI输入4路HDMI输出，主要功能是将一个完整的
HDMI高清图像信号划分成4块后分配给4个视频显示单元(如背投单元, 液晶电
视机等),完成用4个hdmi高清视频显示单元组成一个动态图像大屏幕。
支持模式

特点
*支持HDMI输入
*输入支持HDMI1.3支持4路HDMI输出
*输入支持1920x1080P 24/30/50/60HZ及以下
*输出支持1920x1080P
*支持多种拼接，操作简易，即插即用
物理接口示意图
OUTPUT → HDMI信号输出
INPUT → HDMI信号输入
DC/12V → 电源适配器接口
IR → 红外遥控接收
LED → 电源指示灯
Audio → 音频开关按钮
Mode → 不同模式切换按钮
→当前模式下，画面翻转按钮

遥控器介绍
操作步骤
步骤一：HDMI in 用HDMI 线缆连接到 HDMI 信号源，HDMI out 连接
到拼接屏；
步骤二：连接 12V 电源适配器；
步骤三：通过机子的 MODE 按钮，或者遥控来调节合适的模式。
包裹附件
1、2x2 拼接器 x1
2、电源适配器 x1
3、用户手册 x1

连接示意图