KL Industries 6' Bali User manual

KL INDUSTRIES INC.
Waterquest Kayaks
All Models
OWNER’S MANUAL
1790 Sun Dolphin Drive
Muskegon, Michigan 49444
phone [phone]
fax [phone]
email [email protected]
website www.klindustries.com
Manufactured by:

1
Dear Customer,
Congratulations on the recent purchase of your new Waterquest kayak manufactured by KL Industries! You have purchased a kayak
from one of the nation’s leading manufacturers of small boats. Your kayak represents years of commitment to product design,
excellence in engineering and quality in manufacturing. With proper care and maintenance, your kayak should last for many years
to come. If you have any questions, please call our helpful and knowledgeable Customer Support Department at 800-733-2727.
IMPORTANT INFORMATION TO CONSERVE
Keep your Owner’s Manual for future reference. In order to provide you with efficient and accurate service, please have the
following information available:
Model and Serial Number _______________________________________________
Date and Place of Purchase ______________________________________________
To order parts and accessories visit our website at www.klindustries.com or contact us at 800-733-2727
HOW TO LOCATE YOUR SERIAL NUMBER
The serial number is located on the rear right-hand side of the hull. The number starts with JOK and is
12 digits long. Photo #1
Serial Number Location

Never exceed the maximum weight capacity.
Never exceed your ability: Access your physical capability as to how long you can paddle and swim.
Make sure drain plug is secure. The drain plug is located on the rear deck (photo #2). Note: 6’ and 8’ kayaks are not equipped
with drain plugs.
Always familiarize yourself with the body of water where you will be boating: Learn what hours boating are permitted,
whether there are any known hazardous conditions, and where you can get help quickly in case of an emergency or accident.
Always abide by Coast Guard regulations and State and Local laws, regulations ordinances and rules concerning boating
and boating safety: Check with Coast Guard and local authorities concerning proper handling and the proper equipment to
be carried on board, such as lights and sound-producing devices.
Never use or consume alcohol, drugs or any other substance that may affect your coordination, judgment or ability to
safely operate the boat.
Sound Device: The Coast Guard requires boaters to have a means of signaling other boats of their presences. You should always keep a device such as
a whistle in the boat at all times. If possible, attach the sound device to your Personal Flotation Device.
Never stand up in the boat: Standing in the boat may cause it to capsize. If the boat should capsize, please note that, in most cases it is far more
dangerous to attempt to swim to shore than to stay with the boat.
Slippery when wet: The hull material may be slippery when wet. Always wear slip-resistant shoes.
Hypothermia: Boating accidents in cold water are very dangerous. Hypothermia (the loss of body heat due to immersion in cold waters) can be deadly. Survival
time can be as short as 15 minutes in 35 degree F (2 degree C) water. Dress appropriately for weather conditions, wearing a wet or dry suit if necessary.
Never allow minors to use this boat without adult supervision.
Always tell someone your boating plans. Inform others of your boating plans, including where you are going, how long you will be gone and when
you expect to return.
Never use this boat in severe weather conditions: Although stable, large waves could cause the boat to overturn.
Do not paddle in flood conditions. Never use this boat in rapids or fast moving currents: This boat is designed for leisure. The boat could be damaged
and (or) the occupants could be severely injured should they attempt to utilize it in any other way.
Never use this boat after sunset: This boat is not equipped with horns or lighting equipment required to ensure the safety of its occupants.
Always wear a helmet where appropriate.
Always wear a Coast Guard approved Personal Flotation Device (PFD) when using this boat: Before going boating, read the PFD manufacturer’s
information pamphlet regarding the PFD and thoroughly familiarize yourself with how the PFD is to be worn.
WARNING
Read the following information before using your kayak. Failure to follow the warning precautions below may lead to serious injury including
the possibility of death.
SECURITY MEASURES
Photo #2
Drain Plug Location
2

3
MATERIAL
Your kayak is manufactured from High Density Polyethylene (HDPE). It is a very durable material. Our specially formulated HDPE has
an ultra-violet inhibitor blended throughout the material to reduce color fade and maintain its strength. Polyethylene is a somewhat
flexible material with some memory. This means it has a tendency to return to its original molded shape if distorted. All boats are
equipped with foam for flotation.
BOAT SET-UP
Note: Models vary and may not come equipped with the features listed below.
Adjustable Foot Braces
Raise the foot brace handles and adjust foot braces to desired position. Lower handles to lock in position.
Adjustable Seat Back
Unhook strap fasteners from eyelets. Adjust straps to desired position. Lock fasteners back into eyelets.
Paddle Holder
Paddle can be secured in bungee paddle straps on side of hull. The paddle holder for 8’ models is formed into the kayak.
Drain Plug
Make sure drain plug is secure. Note: 6’ and 8’ kayaks are not equipped with drain plugs.
Manufacturers Statement of Origin (MSO)
You should receive a MSO with your new boat. Some states may require a MSO for proper registration of your boat. Please check
with your local licensing bureau.
APPLYING REGISTRATION DECALS
Before applying boat registration decals (if required), clean the area with alcohol or any solvent that does not leave a residue. Make
sure the solvent is put aside and the decal area is dry. Using a propane torch, lightly pass the flame back and forth over the area
where the decals will be applied. Don’t try to heat the surface. This procedure will enhance the adhesion of the decals.

4
BEFORE LEAVING THE SHORE
Make sure your drain plug is secure.
Passengers should always wear a Personal Flotation Device.
Check for wind conditions, currents or wave conditions that would make it difficult to paddle back.
Always let someone know of your boating plans, your boating location, and when you expect to return.
CARE AND MAINTENANCE
Your kayak is designed to require minimal maintenance, and a little timely care will ensure a lifetime of enjoyment. Whenever you
wash your boat, use mild soap and water. Rinse your boat and hardware thoroughly after paddling in salt, brackish or polluted water.
A quick rinse of the moving parts of the foot braces keeps them clean and operating smoothly.
Occasional operational checkups will keep your boat in tip top condition. Check hatch covers, cables, buckles, straps and other
moving parts for wear, and replace them when necessary. Give your hull and deck a thorough review annually. Light nicks,
scratches and scrapes are part of the paddling experiences, but deep scratches should be repaired.
Polyethylene is a somewhat flexible material with some memory. This means it has a tendency to return to its original molded
shape if distorted. If this occurs, follow these steps:
1. Relieve the pressure that caused the dent or distortion by supporting the boat differently or removing the gear.
2. Place the boat in the warm sun. Usually the south side of the building is the warmest spot. As the boat warms up, usually
(but not always) the boat will return to its original molded shape. This may take a few hours or a couple of weeks depending
upon outside temperatures and the degree of distortion.

5
STORAGE
• Store your kayak on its side. Do not store your boat on its hull.
• To protect your kayak, provide shelter from sun using a tarp suspended above the boat. To prevent excessive heat build-up,
do not cover boat with tarp laying directly on its surface. Leave adequate air space to allow for air circulation.
• If possible, it is best to store your kayak inside for the winter. If stored outside, custom mooring covers that prevent water and
debris from accumulating are available from local marine dealers.
• Don’t allow water to accumulate between the deck and hull and freeze. Freezing damages the flotation foam.
• Don’t place the boat on 4x4’s or sawhorses. Dents will form in the hull.
FREQUENTLY ASKED QUESTIONS
• Where is the serial number located? The serial number is located on the rear right-hand side of the hull. The number starts with
JOK and is 12 digits long.
• What can I do if dents form in the hull from improper storage? Expose the dents to the warm sunlight, preferably on the south
side of a building. As the plastic warms, it will usually (but not always) return to its molded shape. This process may take one
day to two weeks.

7
Please Choose Your Model
ALSO FEATURES:
• Lightweight, easy
to carry
• Tracks and
paddles with
ease while offering
maximum stability
• Tough polyethylene
deck and hull
Comfotable, padded
seat back
(optional, seating may vary) Self
bailing
Carrying
handles
Open cockpit
allows the easiest
of entry
Recessed
drink holders
Dry storage
compartment
(optional) Convenient
paddle
holder
On-board storage
with shock-cord
deck rigging
Graduated foot wells are
molded-in to accomodate
paddlers of any size or age
6’ Bali 8’ Bali
(SS Model Shown)
Tough polyethylene
deck and hull
Self
bailing
Graduated foot wells
Open cockpit allows
the easiest of entry
Large, comfortable
seating area
Convenient
paddle holder
ALSO FEATURES:
• Lightweight, easy
to carry
• Tracks and paddles
with ease while
offering maximum
stability
Specifications
Length 6’ 183cm
Width 24” 61cm
Depth 8” 20cm
Weight 30 lbs. 14kg
Capacity 140 lbs. 64kg
Specifications
Length 8’ 244cm
Width 28” 71cm
Depth 15” 38cm
Weight 30 lbs. 14kg
Capacity 197 lbs. 89kg

8
Please Choose Your Model
ALSO FEATURES:
• Lightweight, easy
to carry
• Tracks and paddles
with ease while
offering maximum
stability
Large, comfortable
seating area (seating
may vary)
Convenient
paddle holder
Retractable carrying
handles
Shock cord
deck rigging
fore/aft
Open cockpit
allows the easiest
of entry
Dry storage
compartment
Tough polyethylene
twin sheeted deck
and hull
12’ Sit-On
(Excursion Model Shown)
Open cockpit
allows the easiest
of entry
Adjustable foot
braces
Convenient
paddle holder
Tough polyethylene
twin sheeted deck
and hull
Dry storage
compartment
Optional
swivel fishing
rod holder
Shock cord deck
rigging fore/aft
ALSO FEATURES:
• Lightweight, easy
to carry
• Tracks and paddles
with ease while
offering maximum
stability
Specifications
Length 10’ 305cm
Width 30” 76cm
Depth 11” 28cm
Capacity 250 lbs. 113kg
Specifications
Length 12’ 366cm
Width 29.5” 75cm
Depth 13.5” 34cm
Capacity 395 lbs. 179kg
10’ Sit-On
(Excursion Model Shown)
P.A.C.
Optional Portable
Accessory Carrier
Retractable
carrying
handles
Large comfortable
seating area
(seating may vary)
Optional flush
mount fishing rod
holders
Adjustable
foot braces
Optional swivel
fishing rod holder
P.A.C. Optional
Portable Accessory
Carrier
Optional flush mount
fishing rod holders

Please Choose Your Model
ALSO FEATURES:
• Adjustable foot
braces
• Hull design
is optimum
combination
of tracking
and turning
Large open
cockpit
UV-stabilized
High Density
Polyethylene
Carrying
handles
fore and aft
Paddle
leash
Spray
deflector/collar
Shock cord
deck rigging
Deluxe adjustable seat
with high back support
(seating may vary)
Storage
hatch
Water bottle
holder
10’ Sit-In
(Excursion Model Shown)
9
8’ Aruba
(SS Model Shown)
Large open
cockpit
Carrying
handles
Convenient
paddle holder
Tough Polyethylene
deck and hull
Recessed
drink holder
Comfotable,
molded-in
high back seat
Spray deflector/
collar
ALSO FEATURES:
• Lightweight, easy
to carry
• Tracks and paddles
with ease while
offering maximum
stability
Specifications
Length 8’ 244cm
Width 28” 71cm
Depth 16” 41cm
Weight 27 lbs. 12kg
Capacity 260 lbs. 118kg
Specifications
Length 10’ 305cm
Width 30” 76cm
Depth 13” 33cm
Weight 41 lbs. 19kg
Capacity 250 lbs. 113kg

10’ Tahiti
ALSO FEATURES:
• Adjustable foot
braces
• Hull design
is optimum
combination
of tracking
and turning
• Two flush mount
rod holders
Specifications
Length 10’ 305cm
Width 30” 76cm
Depth 13” 33cm
Weight 41 lbs. 19kg
Capacity 250 lbs. 113kg
10
Please Choose Your Model
ALSO FEATURES:
• Lightweight, easy to
carry
• Tracks and paddles
with ease while
offering maximum
stability
• Adjustable foot
braces
Convenient paddle
holders
Tough
polyethylene twin
sheeted deck and hull
Retractable
carrying
handles
Thigh
pads
Optional swivel
fishing rod holder
Shock cord
deck rigging
fore/aft
Large, comfortable
seating area
(seating may vary)
Optional flush
mount fishing rod
holders
Covered
console
12’ Sit-In
(Excursion Model Shown)
Specifications
Length 12’ 366cm
Width 29.5” 75cm
Depth 13.5” 34cm
Capacity 395 lbs. 179kg
Large open
cockpit
Shock cord
deck rigging
Carrying
handles
fore and aft
UV-stabilized
High Density
Polyethylene
Deluxe adjustable seat
with high back support
(seating may vary)
Spray deflector/
collar
Paddle
leash P.A.C.
Optional Portable
Accessory Carrier

WARRANTY
Please call us at 231-733-2725 if you have questions or a problem with your boat. Do not return the boat to the
retailer.
KL Industries, Inc. warrants to the original owner of any KL Industries boat. Any part of the boat that is defective
in material or workmanship will be repaired, without charge, at the purchasers’ local dealer or at KL Industries.
For personal use, this warranty shall apply for a period of two years on the deck, hull and parts from the date of
retail sale. Any warranties from suppliers of component parts supersede KL Industries’ warranty. This warranty covers
use under normal conditions and does not cover damage caused by accidents, alteration, or misuse.
Freight to and from a local dealer or manufacturing plant is at the owners’ expense.
Warranty is not valid unless registration form is returned within 30 days of retail purchase.
Register online at: www.klindustries.com
Warranty