Klimaire KIWQ Series User manual

SPLIT-TYPE ROOM AIR CONDITIONER
KIWQ / KOIQ
SERIES
WiFi Function
User Manual
This description is applied to Air Conditioners
with Wi-Fi function. Please read the manual
carefully before using the product and keep it
for future reference.
For more information please visit www.klimaire.com
TM

Step 3
Step 1
Operation
Steps
Step 4
Step 2
Step 5
Registration
Account
Download and
Install APP
Operation
Items
Login
Activate APP
Add Device to control
YES
YES
New Account
YES
YES
YES
NO
YES
Re-install APP
(registered before)
YES
YES
Registered Device will remain.
Operation guideline. Please take below simple guideline instruction as reference.
Note If you registered the account and added device before, when you re-install the APP again and login,
the added device will remain .
FCC Caution ( FCC ID: 2AJCLTWAC-TYWFS)
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
The distance between user and device should be no less than 20cm.
Let'sget start!

CONTENTS
Wi-Fi Module specification and basic information..............................................1
Download and Install the App.............................................................................2
Activate APP.........................................................................................................3
Registration.........................................................................................................4
Login....................................................................................................................6
Add device........................................................................................................8
Air conditioner control.......................................................................................10
Account management........................................................................................29
TroubleShooting...............................................................................31

1. Minimum specifications on a Smart phone:
Android 5.0 version or higher
IOS 9.0 version or higher
Wi-Fi Module specification and basic information
1
3. Wi-Fi module location and appearance in indoor unit
Open the front panel, the Wi-Fi module is nearby the electric box cover or on the panel.
RESET
SN:
Reset button
Connecting cable
2. Basic parameters for Wi-Fi module
2.400 - 2.500GHz
Protocol stack support
IEEE 802.11 b/g/n(channels 1-14)
Network frequency
Parameters
IPv4/IPv6/TCP/UDP/HTTPS/TLS/MulticastDNS
Security support WEP/WPA/WPA2/AES128
Details
Standards of WLAN
Network type support STA/AP/STA+AP

Download and Install the App
2
Smart Life
Note:
Please enable the permissionsof Storage/Location/Camera forthis APP when installing.
Otherwise it will havesome problems when operating.
For Android smart phone
Method1: Please scanthe QR codewith a browser scanner, download and install theAPP.
Method2: Open theGoogle "Play Store" on your smart phoneand search "SmartLife",
download and install the APP.
For IOS smartphone
Method1: Please scanthe QR codeand follow the tips toget into"AppStore", download
and install the APP.
Method2: Open theApple "AppStore" on your smartphone and search"Smart Life",
download and install the APP.

1. Launch the APP "Smart Life" on your smart phone.
3
Activate APP
2. Method1:Tap button "Scan" and scan the right Activate QR code
Method2: Tap "or Enter Activation Code" in bottom of the screen,
then enter the activate code and tap "CONFIRM".
Smart Life
Activate QR code and activation code
Note Without the QR code or activation code,
you can't active the APP and using it,
please keep them safe.
Scan
Scan the activation QR code
from instructions or device
or Enter Activation Code
or Enter Activation Code
CANCEL CONFIRM
******
The first time the app is used, it will need activating.

Registration
1.If you don't have any account please tap button "Register".
2.Read the Privacy Policy and tap "Agree".
4
3.Tap">" and choose the country.
4.Enter your phone number or e-mail address.
5.Tap the button "Obtain verification code".
Log in with existing account
Privacy Policy
we pay high attention to theprivacy
of personal information.To fully
present how wecollect and use your
personal information, werevised the
Privacy Policy indetail in compliance
with the latest laws and regulations.
By clicking Agree, you agree that you
have fully read,understood and
accepted all the content of the
revised Privacy policy. Please take
your time to read the Privacy Policy. If
you have anyquestion, please
contact us atany time.
Privacy Policy
Disagree Agree
#
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Country Choosed
A
Afghanistan
Albania
Algeria
Angola
Argentina
Armenia
Australia
Search
Resister
China +86 >
138******** X enter your mobile phone number
or e-mail address here
Search the country or slide the
screen up/down to find
and choose the Country.
<<
I agree with Service Agreement and Policy
Register
Obtain verification code

Registration
6.Enter the verification code you received from phone message or e-mail.
7.Set the Password with 6-20 characters including characters and numbers.
8.Tap "Done".
5
Enter verification
code
Verification code is sent to your phone:
86-***********,Resend(55s)
* * * * * *
<
Set Password
6-20 characters for password, including character, numbers
******
<
Login
Login
Login
China +86 >
138********
<
I agree with Service Agreement and Policy
Log in
******
SMS verify and sign in Forgot password
1.Tap "Log in with existing account".
2.Enter your registered account and password.
3.Tap "Log in" button.
enter the password
enter your account here
Log in with existing account
Register
Done

Living Room Master Bedroom
Second Bedroom Dining Room
Kitchen Study Room Porch
Balcony Kids Room Closet
Login
The first time the APP is used, Create family is needed:
4.Tap "Create family".
5.Make name for the family.
6.Set the location.
7.Choose default rooms or add new rooms.
8.Tap "Done" and "Completed".
Turn on your smart life
Create family
Log out
#
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Family Name
<Add family Done
Family Location Set location >
Smart devices in rooms:
Living Room
Master Bedroom
Second Bedroom
Dining Room
Kitchen
Study Room
Add Room
You can change the room settings anytime
My home
choose the recommended room
or make a new room, then tap
Done.
Room Name
<Add Room Done
Recommended
*******
6
#
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Allow Smart Life to access this device's
location?
ALLOW ONLY WHILE IN USE
ALLOW ALL THE TIME
DENY
CANCEL CONFIRM
Note:
The app can open the map on your
phone and you can set the location
where you are.
Family created successfully
View family Completed

Login
7
Forgot the password
If you forgot the password, you can login as below:
(Only for phone number accounts)
1.Tap "SMS verify and sign in".
2.Enter your phone number and tap button "Obtain verification code".
3.Enter the verification code received by your phone.
Login
China +86 >
Mobile number/e-mail address
<
I agree with Service Agreement and Policy
Log in
Password
SMS verify and sign in Forgot password
SMS verify and sign in
China +86 >
138******** X
<
Obtain verification code
Enter verification
code
Verification code is sent to your phone:
86-***********,Resend(55s)
* * * * * *
<
Or you can reset the password as below:
1.Tap "Forgot password".
2.Enter your account(phone number or e-mail address) and tap button
"Obtain verification code".
3.Enter the verification code received by your phone or e-mail.
4.Set the new password and tap button "Done".
Login
China +86 >
Mobile number/e-mail address
<
I agree with Service Agreement and Policy
Log in
Password
SMS verify and sign in Forgot password
Forgot password
China +86 >
138******** X
<
Obtain verification code
Enter verification
code
Verification code is sent to your phone:
86-***********,Resend(55s)
* * * * * *
<
Set Password
6-20 characters for password, including character, numbers
******
<
Done

8
my home +
>
Set your home location, get more
information
Welcome home
V
All Devices Living Room room
Master Bed ...
No device
Add Device
Home Me
1.Power on the indoor unit, no need to launch the air conditioner.
2.Click "+" in the upper right corner of the "Home" screen
or tap "Add device" on the room which has no device.
3.Tap the "Split Air conditioner" logo.
4.Reset the Wi-Fi module by pressing the "DISPLAY" on the remote
controller 6 times , or use a suitable tool to press the reset button
on the Wi-Fi module, until it shows "CF" on the indoor display,
then tap"Next Step".
5.Input the password of the Wi-Fi which the same as your smart
phone connected, tap "Confirm"(You can change network if needed).
6.You can see the percent rate of connecting process, at the same time
PP","SA","AP" shining in turn on the indoor display.
"PP" means "Searching the router"
"SA" means "connected to the router"
"AP" means "connected to the server"
Add Device
<
Add Manually Search Device
Large
Home Ap...
Security &
Sensors
Split Air condi-
tioner
Window Ty
pe Air Conditi...
Dehumidifier
Port-
able Air cond...
Fresh air
purifier
Add Device
<AP Mode
Add Device
Press the DISPLAY on the remote
control key 6 times in the time of 6
seconds until the LCD screen show
"CF"
View help
Next Step
Add Device
<AP Mode
Enter Wi-Fi
password
This app is supported only on
2.4GHz Wi-Fi channels
******
Confirm
Change network
wifiname
Add Device
<
Connecting now
Make sure your phone and device
are as close to your router as possible.
Searching for device
o Registering device to the cloud
o Initializing your device
50%
Add Device
<
Device added
successfully
Sample1
Living Ro... Master Be... Second B...
Dining R... Kitchen Study Ro...
Rename the
device
Select the
location room
enter password
Done
Add device
There are 2 modes CF(Quick connection) and AP(Access Point) for adding device.
CF mode

9
Add device
my home +
>
Set your home location, get more
information
Welcome home
V
All Devices Living Room room
Master Bed ...
No device
Add Device
Home Me
1.Power on the indoor unit, no need to launch the air conditioner.
2.Click "+" in the upper right corner of the "Home" screen
or tap "Add device" on the room which has no device.
3.Tap the "Split Air conditioner" logo.
4.Reset the Wi-Fi module by pressing the "DISPLAY" on the remote
controller 6 times , or use a suitable tool to press the reset button
on the Wi-Fi module, until it shows "AP" on the indoor display,
then tap"Next Step".
5.Input the password of the Wi-Fi which the same as your smart
phone connected, tap "Confirm".
6.In the network setting screen, select "SmartLife-****", and tap" ".
7.You can see the percent rate of connecting process, at the same time
PP","SA","AP" shining in turn on the indoor display.
"PP" means "Searching the router"
"SA" means "connected to the router"
"AP" means "connected to the server"
Add Device
<
Add Manually Search Device
Large
Home Ap...
Security &
Sensors
Split Air condi-
tioner
Window Ty
pe Air Conditi...
Dehumidifier
Port-
able Air cond...
Fresh air
purifier
Add Device
<AP Mode
Add Device
Press the DISPLAY on the remote
control key 6 times in the time of 6
seconds until the LCD screen show
"AP"
View help
Next Step
<AP Mode
Enter Wi-Fi
password
This app is supported only on
2.4GHz Wi-Fi channels
******
Confirm
Change network
wifiname
AP mode
<
Connecting now
Make sure your phone and device
are as close to your router as possible.
Searching for device
o Registering device to the cloud
o Initializing your device
50%
AP mode
<
Device added
successfully
Sample2
Living Ro... Master Be... Second B...
Dining R... Kitchen Study Ro...
Rename the
device
Select the
location room
Done
enter password
<
<
WLAN
AVAILABLE NETWORKS
SmartLife-****
office wifi
WIFI1
AP mode

Air conditioner control
The device control screen will pop up automatically after adding the device.
The device control screen will pop up manually by tapping the device name on the home screen.
<<
my home +
>
Set your home location, get more
information
Welcome home
V
All Devices Living Room room
Master Bed ...
Home Me
Sample1
Sample2
Turned off
Already On
ON/OFF Fan Speed Precision
Air Flow
More
Eco Sleep
Mode
Timer
Sample1
Note:
There are two different control forms base on different software or Wi-Fi module firmware.
Please read the manual carefully base on the real control interface.
88
F
Set Temperature
Timer
Function
Fan
Mode
Sample2
<
10
Control form1 Control form2
88
Cool
0

11
Air conditioner control
88
F
Set Temperature
Timer
Function
Fan
Mode
Sample2
<
Turn ON/OFFthe
air conditioner
Device details
and management
Increase the
setting temperature
Decrease the
setting temperature
The main control interface
Back to the
Home screen
Indicator of
setting temperature
Selected Mode/Fan speed/
Functions indicator
Control form1

Air conditioner control
Control form1-Mode setting
1.Tap Mode to pop up the Mode screen.
2.Select one of the mode Feel/Cool/Heat/Dry/Fan.
3.Tap anywhere around the setting temperature to cancel the Mode setting.
88
F
Set Temperature
Timer
Function
Fan
Sample2
<
Mode
FanDry
Feel Cool Heat
Mode
Control form1-Select fan speed
88
F
Set Temperature
Timer
Function
Sample2
<
Mode Fan
Fan
Med Low Auto
High
1.Tap Fan to pop up the Fan screen.
2.Select one of the fan speed High/med/Low/Auto.
3.Tap anywhere around the setting temperature to cancel the selection.
12

Air conditioner control
Control form1-Function setting
1.Tap Function to pop up the Function screen.
2.Select one of the functions Sleep/Turbo/ECO.
3.Select UP-DOWN/LEFT-RIGHT for auto swing with direction of UP-DOWN/LEFT-RIGHT.
4.Tap anywhere around the setting temperature to cancel the Function setting.
88
F
Set Temperature
Timer
Fan
Sample2
<
Mode
Control form1-Timer adding
1.Tap Timer to pop up the Add Timer screen.
2.Tap Add Timer.
13
Function
UP-DOWN
LEFT-RIGHT
Turbo
Sleep ECO
Function
88
F
Set Temperature
Timer
Function
Fan
Mode
Sample2
<
WLAN
<<
Add Timer
Add timer

Air conditioner control
Control form1-Timer adding
3.Select the time, select the repeat days and Timer on/off.
4.Select the Mode/Fan speed/Function and select the setting temperature for Timer on.
5.Tap Save to add the timer.
14
Hour setting Minute setting
Mode setting
Fan Speed
setting
Weekly setting
Timer cancel Timer submit
Temperature
setting
Timer ON/OFF
setting
Cancel Add Timer Save
15 10
14 09
13 08
12 07
16 11
17 12
18 13
Timer Off
Timer On
Mode
Fan
Set Temperature
Function
Cool
Auto
23 C
<
<
<
<
Cancel Add Timer Save
15 28
14 27
13 26
12 25
16 29
17 30
18 31
Select days to use Smart Mode
Timer Off
Mon Tues Wed Thur Fri Sat Sun
Timer On
Control form1-Timer Management
WLAN
<<
Add Timer
Add timer
Timer accuracy is -/+ 30 seconds
12:20
Once
Timer:Off
12:20
Mon, Tue, Wed, Thurs
Timer: On 16 Cool Turbo UP-DOWN
1.Tap the bar of timer to edit the Timer like the Timer adding process.
2.Click the switch to enable or disable the Timer.
3.Holdind the bar of Timer about 3seconds and pop up the Remove Timer screen,
tap CONFIRM and remove the Timer.
Remove Timer
Remove the timer?
CANCEL CONFIRM
Timer on Timer off

Air conditioner control
15
Back to the
Home screen
Name of the device
Current mode
Increase the
setting temperature
Decrease the
setting temperature
Power on/off
Selected Functions
indicator
Note: it may appear slightly different ,
depending on the air conditionermodel.
Example as below:
Tips
Different backgroundfor
different mode:
Cool/Heat/Dry/Fan/Auto
ON/OFF Fan Speed Precision
Air Flow
More
Eco Sleep
Mode
Timer
Sample1
Fan Speed Swing Flow
Eco Sleep
Mode
Timer
Turbo
Function Buttons
Control form2
The main control interface
88
Cool
0

Air conditioner control
1.Tap the Mode button.
2. There are 5 modes on the Mode screen, tap one button to
set the Air conditioner working mode.
3.Tap the X button to back the main control screen.
4.The mode and background will change on the screen.
ON/OFF Fan Speed Precision
Air Flow
More
Eco Sleep
Mode
Timer
Sample1 Back Sample1
Cool Dry Fan
Heat
Auto
Mode X
Note: please read the details of each mode
in the user manual to control more comfortable.
ON/OFF Fan Speed Precision
Air Flow
More
Eco Sleep
Mode
Timer
Sample1
1.Tap the Fan speed button.
2.Choose your desired fan speed and tap it.
3.Tap the X button to back the main control screen.
4.The selected fan speed indicator will appear on the screen.
Back
Sample1
Turbo Mid-High Mid
high
Fan Speed X
Mid-Low Mute Auto
Low
Mode Fan Speed
Cool
Fan
Dry
Heat
Auto
All speeds
All speeds
All speeds
All speeds
16
Note: Fan Speed screen mayappear slightly different ,
depending on the air conditionermodel.
Example as below:
Mid
high
Fan Speed X
Auto
Low
Note:
Fan Speed can't be adjusted on Dry mode .
Control form2-Mode setting
Control form2-Fan speed selection
88
Cool
0
88
Cool
0
88
Cool
0
88
Cool
0

Air conditioner control
1.Tap the Precision Air Flow button or Swing Flow button.
2.Choose your desired air flow and tap it.
3.Tap the X button to back to the main control screen.
4.The selected air flow indicator will appear on the screen.
ON/OFF Fan Speed Precision
Air Flow
More
Eco Sleep
Mode
Timer
Sample1
17
ON/OFF
Sample1
Fan Speed Swing Flow
Eco Sleep
Mode
Timer
Turbo
Left-Right Flow
Note: The Main controlscreen and Air Flowscreen may appear slightlydifferent ,
depending on the airconditioner model.Example asbelow:
Get verification code
< Precision Air Flow
Up-Down Flow Control Left-Right Flow Control
Downwards
Swing
Up-Down
Swing
Upwards
Swing
Middle Fix
Top Fix Upper Fix
Lower Fix Bottom Fix
< Precision Air Flow
Up-Down Flow Control Left-Right Flow Control
Right
Swing
Left-Right
Swing
Left
Swing
Middle
Swing
Center-Left
Swing
Center-Right
Swing
Wide
Swing
Center-Right
Fix
Left fix Center-Left
Fix
Middle Fix
Right Wide
Angle Fix
Right Fix Whole
Anger Fix
Left Wide
Angle Fix
Back
Sample1
Swing Flow X
Up-Down Left-Right
Note: For some models without auto Left-Right wind, If you active it, you will hear a beep,but no any actions.
Control form2-Air Flow control
88
Cool
0
88
Cool
0
88
Cool
0