Klipsch Reference Premiere RP-160M User manual

PRE
M
IER
E
USER MANUAL

REFERENCE (n):
1) the standard, the benchmark, the point used
for comparison
2) the embodiment of the legendary Klipsch sound
LOUD AND PROUD SINCE 1946
In 1946, Paul W. Klipsch revolutionized the audio industry by creating
our proprietary horn technology and the acoustic principles that
are the driving force behind our highly acclaimed signature sound.
Today, we remain true to PWK’s vision and pack the better part
of a century’s worth of sweat and genius into every product we
make. These speakers are the result of our obsession with that
aural perfection. Experience the power, detail and emotion of
Klipsch Reference Series.
We are the Keepers of the Sound®.
ENGLISH

REFERENCE PREMIERE SPEAKERS
RP-160M
RP-450C
RP-440C
RP-250CRP-250FRP-260FRP-280F
RP-150M RP-250S RP-240S

BEFORE YOU START
The included optional
spikes are intended to
increase stability on
carpeted floors. Spikes
are not recommended
for hard surfaces
Some Klipsch®speakers have feet and other accessories that may need to
be installed prior to use. Please refer to Diagrams 1, 2, 3 and 4 for installation.
DIAGRAM 1
R-150M WALL MOUNT DIAGRAM 2 CENTER CHANNELS
DIAGRAM 3
SURROUND SPEAKERS
DIAGRAM 4
FLOORSTANDING SPEAKERS
Felt
Bumpers
Rubber
Bumpers
Rubber
Bumpers
Optional
Tilt Rod for
RP-250C
Domed Bumpers
Place on bottom or
back (if wall mounted)
Floor Spikes
OR
OR
1~2mm
1~2mm

ROOM PLACEMENT CONNECTION
Left and Right Main Channel Speakers — For optimum performance, Klipsch Group,
Inc. (KGI) suggests placing your speakers 6 to 15 feet (1.8 to 4.6m) apart. They may
also be toed-in slightly for better stereo imaging. The listening position should be
about 1 to 1.5 times the distance separating the speakers. Refer to Figures 1 and 3
for connection and placement.
Center Channel Speakers — Center channel speakers are designed to place
dialogue and primary sounds so that they appear to come from the video screen.
The speakers should therefore be placed as close to the screen as possible,
preferably directly on top of or below the screen. Refer to Figures 1, 2 and 3 for
connection and placement.
Rear Surround Channel Speakers — Klipsch WDST surround speakers should be
placed approximately 2 feet above the listening position. Typically this will be
about 5-7 feet above the floor. The surrounds should be placed on the walls directly
adjacent to the listening position. Another option would be on the wall behind the
listening position. The final surround speaker placement depends on your room’s
characteristics. They are designed to recreate the sense of space and ambience that
many of today’s surround sound technologies provide. Refer to Figures 1, 3 and 4 for
connection and placement.
Conventional Connection — Using 16-12 gauge speaker wire, connect the RED
“positive” (+) terminal of the LEFT speaker to the RED “positive” (+) terminal of
your amplifier’s LEFT channel. Connect the BLACK “negative” (–) terminal of the
LEFT speaker to the BLACK “negative” (–) terminal of your amplifier’s LEFT channel.
Repeat this procedure for connecting all remaining speakers to the appropriate
amplifier channels. Refer to Figure 3. Make sure that no bare wires from any of the
connections touch any other terminals as this could cause a short and damage your
equipment.
Reference Premiere models RP-280F, RP-260F, RP-250F and RP-160M are equipped
with dual binding posts. If single wire connection is used, the terminal connecting
bar should remain in place. If Bi-wire or Bi-amp connection is used, the terminal
connecting bar must be removed. Please see your receiver’s manual for
further instructions.
Amplifier Requirements — Klipsch speakers are highly efficient and will operate
easily on a wide variety of amplifiers. All Klipsch speakers are 8-ohm compatible and
can be driven to very high levels with low distortion. Due to the high output levels
Klipsch speakers are capable of reproducing, exercise caution with the volume
control. Excessive volume over long periods can permanently damage your hearing.
Overdriving your amplifier could also damage your speakers. Check with your dealer
or amplifier manual to make sure your particular amplifier is best suited to your
application. We want you listening for a lifetime.

FIGURE 2
CENTER CHANNEL FIGURE 4 WALL MOUNTING
FIGURE 3
STANDARD CONNECTIONS
Front Right Front Left
SUB SUB
TV
C
X
Y
Z
sL sR
sL sR
X=Y=Z
LR
6’ - 15’
Optional Side Surround Placement (Option A is preferred)
#10
2.5" - 3" panhead wood screws
Mount in wall stud or use
anchors - leave 1/4" exposed
VIA KEYHOLE
VIA THREADED INSERT
CAUTION!
Do not use keyhole
for ceiling mounting!
BELOW
ABOVE
OR
OR
FIGURE 1
SPEAKER PLACEMENT IN LISTENING AREA
3/8-16 x 0.5”
*Wall brackets not included

REFERENCE PREMIERE WITH DOLBY ATMOS® TECHNOLOGY
TV
SBL
SLSR
LR
C
SUB SUB
SBR
3
0
º
1
2
0
º
-
1
5
0
º
9
0
º
-
1
2
0
º
SBRSBLRL
1
2
3
1
3
2 2
3
1
SLSR
RP-280FA RP-140SA RP-140SA
RP-140SARP-280FA
SPEAKER PLACEMENT IN LISTENING AREA
MANDATORY
SECONDARY
OPTIONAL
OR OR
SUROUND
SPEAKER

HEIGHT
MAIN
HEIGHT
MAIN
RP-280FA
HEIGHT
MAIN
RP-140SAFLOORSTANDING SPEAKER
REFERENCE PREMIERE WITH DOLBY ATMOS® TECHNOLOGY
OR
CONNECTIONS
WALL MOUNTINGELEVATION SPEAKER
#10
2.5" - 3" panhead
wood screws
Mount in wall stud
or use anchors -
leave 1/4" exposed
CAUTION!
Do not use keyhole
for ceiling mounting!
The RP-140SA can be added to
any passive loudspeaker setup.
RECEIVER RECEIVER
OR
RECOMMENDED
MIN. CROSSOVER:
150Hz
RECOMMENDED
MIN. CROSSOVER:
80Hz

The only thing you should ever need to do to your speakers is dust them
occasionally. Never apply any abrasive or solvent-based cleaner or any
harsh detergent. You can clean the grilles with the brush attachment of
a vacuum cleaner.
CARE AND CLEANING
Register your product online at www.klipsch.com/register
• Keep up-to-date on new products and promotions.
• Your personal information will never be resold.
• This registration information is not used for warranty purposes.
Please retain your receipt for warranty claims.
PRODUCT REGISTRATION

3
5
02
W
OO
DVIEW TRA
C
E, INDIANAP
O
LI
S
, IN, U
SA
K
LIP
SC
H.
CO
M
1-
800
-KLIP
SC
H
©20
15 KLIP
SC
H
G
R
O
UP, IN
C
. ALL RI
G
HT
S
RE
S
ERVED. KLIP
SC
H AND KEEPER
S
O
F THE
SO
UND ARE RE
G
I
S
TERED TRADEMARK
S
O
F KLIP
SC
H
G
R
O
UP, IN
C
. IN THE U
S
A AND
O
THER
CO
UNTRIE
S
.
A WHOLLY-OWNED SUBSIDIARY OF VOXX INTERNATIONAL CORPORATION. MANUFACTURED UNDER LICENSE FROM DOLBY LABORATORIES. DOLBY ATMOS IS A REGISTERED TRADEMARK OF DOLBY LABORATORIES
.
V08 - 0415

RP-280FA
TAKE YOUR MOVIES AND MUSIC TO NEW HEIGHTS
Our proprietary speaker technologies are ideal for delivering the most
immersive, impactful 360° Dolby Atmos®listening experience. Controlled
directivity and high-performance have been an integral part of Klipsch
acoustic design principals for the better part of a century.
90x90 HYBRID TRACTRIX HORN
Redesigned Tractrix®Horn utilizes a circular horn throat paired to a square
horn mouth to further improve high-frequency response and extension,
while enhancing imaging and dynamics. The compressed molded rubber
construction adds high frequency damping to minimize distortion and
improve detail. This creates the cleanest, most natural sound possible.
LINEAR TRAVEL SUSPENSION (LTS) TITANIUM TWEETER
A Linear Travel Suspension maximizes dynamics for enhanced, detailed
performance. LTS Tweeters have been a hallmark of previous Reference
YV[R`N`dRYYN`\b_»NT`UV]8YV]`PU=NYYNQVbZ`R_VR`ZNXV[TVaNP\_R
component of some of the best speakers in the world.
SPUN COPPER CERAMETALLIC WOOFERS
Cerametallic woofers represent the pinnacle of Klipsch driver design,
maintaining exceptional rigidity, and lightweight construction, for minimal
cone breakup and distortion. When paired with the Tractrix Horn-loaded LTS
adRRaR_Va]_\cVQR``]RNXR_RSºPVR[PfUVTUR`aV[Va`PYN``
TRACTRIX PORT
BaVYVgV[TA_NPa_VeTR\ZRa_faUR?RSR_R[PR=_RZVR_R]\_a`NYY\d`S\_aUR
Z\`aRSºPVR[aSN`aR`aNV_a_N[`SR_S_\ZaURPNOV[Ra®S\_aURPYRN[R`aZ\`a
powerful low frequency response on the market
MDF CABINET WITH PREMIUM FINISH
Contemporary aesthetic with absolute durability that results in a seamless
V[aRT_NaV\[V[a\N[fQzP\_dVaU_RNYd\\Q\_]\YfZR_cR[RR_º[V`UR`
available.
STRONG, FLEXIBLE, REMOVABLE GRILLE
Front grill attaches magnetically for an elegant transition from powerful
showstopper to discrete performance piece.
SPECIFICATIONS - MAIN CHANNEL
FREQUENCY RESPONSE 32-25kHz +/- 3dB
SENSITIVITY 98dB @ 2.83V / 1m
POWER HANDLING (CONT/PEAK) 150W / 600W
NOMINAL IMPEDANCE 8 Ohms Compatible
CROSSOVER FREQUENCY 1750Hz
HIGH FREQUENCY DRIVER 1” Titanium Dome LTS Tweeter with Hybrid Tractrix Horn
LOW FREQUENCY DRIVER Dual 8” Cerametallic Cone Woofers
ENCLOSURE MATERIAL MDF
ENCLOSURE TYPE /N``?R»Re
INPUTS Dual Binding Posts
HEIGHT 43.125" (109.54 cm)
WIDTH 10.5" (26.67 cm)
DEPTH 19.75" (40.17 cm)
WEIGHT 71.75 lbs (32.5 kg)
FINISH Real Wood Veneer: Walnut, Black
Polymer Veneer: Ebony, Cherry
BUILT FROM 2015
3502 WOODVIEW TRACE INDIANAPOLIS, IN 46268 | KLIPSCH.COM
.YY`]RPVºPNaV\[`N_R`bOWRPaa\PUN[TRdVaU\ba[\aVPR"8YV]`PU4_\b]6[P8YV]`PU8RR]R_`\SaUR@\b[QN[QA_NPa_VeN_R_RTV`aR_RQ
a_NQRZN_X`\S8YV]`PU4_\b]6[P_RVTV`aRQV[aURB@N[Q\aUR_P\b[a_VR`.dU\YYf\d[RQ`bO`VQVN_f\SC\ee6[aR_[NaV\[NY0\_]\_NaV\[
Dolby Atmos is a registered trademark of Dolby Laboratories.
SPECIFICATIONS - HEIGHT CHANNEL
FREQUENCY RESPONSE 0\[S\_Z`a\1\YOf.aZ\`@]RPVºPNaV\[
SENSITIVITY 0\[S\_Z`a\1\YOf.aZ\`@]RPVºPNaV\[
POWER HANDLING (CONT/PEAK) 75W / 300W
NOMINAL IMPEDANCE 8 Ohms Compatible
CROSSOVER FREQUENCY 2kHz
HIGH FREQUENCY DRIVER 1" Titanium LTS Tweeter with Hybrid Tractrix Horn
LOW FREQUENCY DRIVER
6.5" Cerametallic Cone Woofer
ENCLOSURE MATERIAL MDF
ENCLOSURE TYPE Acoustic Suspension
INPUTS Single Binding Posts
TS
H