Klipsch R-2650-W User manual

R-2650-W
The affordable R-2650-W in-wall
loudspeaker makes discrete audio a
convincing reality for almost anyone. Built to
the same exacting standards as all Klipsch
products, this high-performance model
doesn’t suffer from the design shortcuts and
sonic compromises that plague competing
designs.
This exceptional speaker employs a 6.5-inch
gray polymer woofer cone and 1-inch
soft/silk dome tweeter to deliver mind-
bending depth and clarity.
Available in a white finish, the R-2650-W can
be paired with one of Klipsch’s new
installation kits (sold separately). Each of
these revolutionary kit designs allow for
increased mounting flexibility and
incorporate a mud ring, wire tie and
universal metal mesh wing for multi-position
placement and a color-coded bracket for
easy speaker size identification.
6.5" Two-Way In-Wall Loudspeaker
SPECIFICATIONS
FREQUENCY RESPONSE 65Hz-20kHz ± 3dB
SENSITIVITY 91dB @ 1 watt/1 meter
NOMINAL IMPEDANCE 8 ohms
CROSSOVER FREQUENCY 1800Hz
POWER HANDLING 50 watts (200 watts peak)
ENCLOSURE MATERIAL/TYPE ABS/ Infinite baffle, front flush with wall
DRIVE COMPONENTS Two-way system using one 1" (2.54cm)
silk dome tweeter and one 6.5" (16.51cm)
polymer woofer
WIRE GAUGE ACCOMMODATED 12
WEIGHT 7.2 lbs. (3.25kg)
HEIGHT 14.3" (36.32cm)
WIDTH 9.3" (23.62cm)
MOUNTING DEPTH 3.75" (9.5cm)
CUTOUT DIMENSIONS 13" (33.02cm) x 8" (20.32cm)
FINISH White
INSTALLATION KIT IK-650-W (sold separately)
■Good sensitivity and power handling
■Single piece grille frame and rustproof aluminum grille
■IR receiver knock out
■Weatherized components
www.klipsch.com
1-800-KLIPSCH
All specifications are subject to change without notice. ©2004