Klus NISA-NI User manual

Cover (C) End cap (D)
LED strip (F)
Silicone cord (E)
1
www.KlusDesign.eu
WARNING! All LED strips should be connected to a 12 V or 24 V power supply.
IMPORTANT: The mounting instructions present the basic form of assembly.
More methods and related accessories can be found at www.KlusDesign.eu
NISA-NI mounting instructions
Parts needed to mount the NISA-NI extrusion
Tools needed for mounting:
- drill
- screwdriver
Extrusion (A) Mounting strip (B)

C
F
A
D
2
www.KlusDesign.eu
NISA-NI mounting instructions
3. Connect power and assemble the extrusion (A) with the mounting
strip (B).
4. Feed the silicone cord (E) into the hole.
5. After mounting the extrusion, apply plaster nish, smoothen and
paint the surfaces.
2. Feed the power cable. Mount the LED strip (F) insert the cover (C)
and end cap (D).
E
B
1. Feed the power cable and attach the mounting strip (B) to the surface
with screws.