KMA TYLER DELUXE User manual

Quick Start Guide
Made in Berlin, Germany since 2013
Please follow us on social: @kmamachines
E-mail: [email protected] | Website: www.kma-machines.com
© 2021 KMA Audio Machines UG & Co.KG
Quick Start Guide
Thank you for purchasing this TYLER DELUXE Frequency Splitter Pedal.
We hope you get many years of pleasure and use from this device and if
this is your rst product from our brand, welcome!
This simple connecting guide should help start you on your journey to
sonic creativity.
However, if you wish to know all of the pedal’s hidden secrets, you can nd
the full manual online on the product page at:
kma-machines.com
Some quick fun examples of use:
You can insert different modulation pedals, for example insert a lush
phaser for the lows and a nice shimmering delay for the highs and TYLER
DELUXE will make it sound like two different guitars are playing at once.
Mix up your modulation pedals with any of your dirt pedals, for a very
pronounced and punchy sound all coming from one amp.
Bass players also want to retain their low end while using their favourite
fuzz or dirt pedal. Insert your dirt box in the high-pass FX-Loop and
adjust the cut-off frequency of the High and Low Pass to your needs.
Dial in your preferred ratio of those Low and High Pass signals, engage the
HP LOOP foot switch and you will never turn TYLER DELUXE off again!
QSG V1.01
TYLER DELUXE Specications
• Two-Channel Signal Splitter - variable 12 dB/oct. Low/High-Pass
• Fully-Isolated and Transformer-based FX Loop Sends
• Variable Clean Blend and Mix controls
- for the perfect blend of highs and lows
• Loop-dedicated and main Phase-Inverters
• Relay-based Soft-Switching
• Separate Buffered FX-Loops for each Filter
• Active Level Control - up to 12 dB Boost
• Power requirements:
9 V DC, centre -, 2.1mm, >100 mA max. current draw

LOW PASS
Sets the Cut-Off Frequency of the Low-Pass Filter
between 3 kHz (fully left) and 20 Hz (fully right)
LP PHASE
Switches the Phase of the Low-Pass Loop ± 180 °
HP PHASE
Switches the phase of the High-Pass Loop ± 180 °
LP CUT Switch
In the downwards position, cuts the Filtered Clean
Low-Pass signal when the Loop is disengaged
LOW PASS LOOP
Connect your pedals or
other audio devices for
the LP Loop Here
MAIN OUTPUT
Connect your amplier/
next series of pedal(s) or
other audio devices here
MAIN INPUT
Connect your instrument
or other feed/ audio
devices here
9 V DC
Input
HIGH PASS LOOP
Connect your pedals or
other audio devices for
the HP Loop Here
HIGH PASS
Sets the Cut-Off Frequency of the High-Pass Filter
between 3 kHz (fully left) and 20 Hz (fully right)
LP LOOP
Engages the
Low-Pass Loop
HP LOOP
Engages the
High-Pass loop
LEVEL
Sets the overall volume, with up to a 12 dB Boost CLEAN
Blends in the Clean signal
MIX
Sets the ratio of the Low- and High-Pass channel:
fully left 100% LP, noon 50/50, fully right 100% HP
MAIN PHASE
Switches the Phase of the main-signal ± 180 °
ACTIVATE
Turns TYLER DELUXE
on/off
HP CUT Switch
In the downwards position, cuts the Filtered Clean
High-Pass signal when the Loop is disengaged