KMART 43078004 User manual
MINI DLP LED PROJECTOR
keycode: 43078004
Instruction Manual
P21065_INTRA_LED_MiniProjector_210719.indd 1 20/7/2021 3:30 PM
2
Safety Instructions:
Please read the instruction manual before using this de-
vice and follow all the safety instructions to avoid damage
caused by improper use.
fKeep the instruction manual for future reference.
Should this device be given to a third party, then this
instruction manual must also be handed over.
fUse this device solely for its intended purpose.
fAlways supervise the device during use!
fNever look straight into the lens when the projector is
switched on, you might cause damage to your eyes.
fThis device is not suitable for use by persons with
limited physical, sensory or mental abilities (including
children), or use by persons with limited experience
and/or knowledge of this device unless they possess
the relevant safety knowledge or instructions on how
the device is to be used. Children should be supervised
to ensure they do not play with the device.
fThe device is only suited to indoor use.
fAlways place the projector on a clean, straight surface,
especially when mounted on the tripod.
fDo not place any objects on the projector.
Danger of electric shock!
fDo not immerse the device in water or use it near water.
fDo not operate the device with wet hands or while
standing on a wet oor. Never touch the power plug
with wet or damp hands.
fDo not attempt to repair the device yourself. Repairs
must be carried out by a qualied professional only.
P21065_INTRA_LED_MiniProjector_210719.indd 2 20/7/2021 3:30 PM
3
fCheck the power cord and plug regularly for any
damage. If the power cord of this device is damaged, it
must be replaced by the manufacturer or its customer
service or a similarly qualied person in order to avoid
hazards.
fDo not operate the device if it has fallen on the oor or
has been damaged in any other way. In such cases,
the device must be taken to a specialist workshop for
inspection and, if necessary, repair.
fConnect the mains adaptor at an easily accessible
socket, so that you can disconnect the device quickly
from the mains supply in an emergency. Pull the mains
adaptor out of the socket, in order to disconnect the
device completely. Use the mains adaptor as a decolla-
tor that should be accessible at any time.
fWARNING: For the purposes of charging the battery,
only use the detachable supply unit provided with this
appliance.
Danger of overheating!
fKeep the device away from all hot surfaces and naked
ames.
fDo not cover the device while in use.
fDo not use the device on a pillow or other soft surfaces.
fKeep the device well ventilated.
This device is suitable exclusively for private house-
hold use.
P21065_INTRA_LED_MiniProjector_210719.indd 3 20/7/2021 3:30 PM
4
Before rst use:
fUnpack the device and check if all parts are there and
undamaged. Should this not be the case, return the
product to retailer for replacement.
fDanger of suffocation! Keep all packaging materials
away from children.
fRemove all protective foils and packaging material
prior to use.
In the box:
Mini DLP LED projector 1x
Power adapter 1x
HDMI cable 1x
Mini tripod 1x
Remote control 1x
User manual 1x
Notes on batteries (remote control)
fOnly use top-quality batteries. Cheap batteries could
leak and damage the device as a result.
fIf the battery leaks, remove it with a cloth and dispose
of it accordingly. Ensure that leaking battery acid does
not come into contact with skin and eyes. If you do get
battery acid in your eyes, ush them thoroughly with
lots of water and consult a physician immediately! If
battery acid comes into contact with your skin, wash
the affected area with lots of water and soap.
fIf the device is not to be used for an extended period
of time, then the battery should be removed, as the
device could become damaged should it leak. If the
device functions weaken, replace the battery.
fBatteries do not belong in household waste! Expired
batteries must be disposed of in an environmentally
P21065_INTRA_LED_MiniProjector_210719.indd 4 20/7/2021 3:30 PM
5
friendly way and according to the applicable legal
regulations.
fBatteries are very dangerous if swallowed. Please keep
the batteries and the device components away from
children at all times. If a battery is swallowed, seek
medical attention immediately.
fBatteries must not be recharged or activated with other
means, dismantled, thrown into re or short-circuited.
fRemove the battery prior to disposing of the device.
Inserting Batteries (remote control)
1. Open the battery compartment.
2. Insert two 1.5V LR03/AAA batteries (not supplied)
into the battery compartment. Please note the polarity
diagram printed inside the battery compartment.
3. Replace the battery compartment cover, making sure it
is closed rmly.
Cleaning and care
Attention! Before cleaning the device, switch it off and
disconnect it from the power supply. .
Attention! Never immerse the device in liquids.
Caution! Do not use alcohol, acetone, benzine, abrasive
cleaning agents, etc. to clean plastic components. Do not
use hard brushes or metal objects.
Only wipe the device with a dry cloth.
P21065_INTRA_LED_MiniProjector_210719.indd 5 20/7/2021 3:30 PM
6
Parts
Front
lens
mini tripod
connector
P21065_INTRA_LED_MiniProjector_210719.indd 6 20/7/2021 3:30 PM
7
TOP / navigation panel
OK conrm
return
up
right
down
left
P21065_INTRA_LED_MiniProjector_210719.indd 7 20/7/2021 3:30 PM
8
BACK
DC 5V jack USB port
infra red receiver
Audio out jack
Focus wheel
charge indicator
P21065_INTRA_LED_MiniProjector_210719.indd 8 20/7/2021 3:30 PM
9
LEFT SIDE
Power button ON/OFF HDMI jack
P21065_INTRA_LED_MiniProjector_210719.indd 9 20/7/2021 3:30 PM
10
REMOTE CONTROL
When using the remote control, it must be pointed at the
infra red receiver at the back of the projector.
MUTE
turn sound
temporarily off
OK
conrm selection
+
increase volume
MENU
select input
source
RETURN
return to
previous screen
HOME
return to
home screen
-
decrease volume
NAVIGATION
up, down,
left, right
POWER
on / off
P21065_INTRA_LED_MiniProjector_210719.indd 10 20/7/2021 3:30 PM
11
CHARGE PROJECTOR
Stick the jack plug of the mains adaptor into the DC 5V
jack on the back of the projector.
Connect the mains adaptor to an appropriate power outlet.
The projector must be switched off for charging.
The charge indicator next to the jack ashes red.
When the battery is charged, the charge indicator continu-
ously shines red.
Note the battery indicator in the top right corner of the
home screen, to check if the battery needs charging.
TURN PROJECTOR ON/OFF
To turn the projector on, press andhold the power switch
ON/OFF on the left side of the device for two seconds.
To switch the projector off, press the power button ON/
OFF on the left side of the device or press the Power
button on the remote control.
ADJUST FOCUS
When the projector is switched on, turn the focus wheel at
the back of the device to adjust the focus.
ADJUST VOLUME
Press the volume + button on the remote control to
increase volume.
Press the volume - button on the remote control to
decrease volume.
MUTE VOLUME
To temporarily stop the sound, press the mute button
on the remote control. Press the button again to start
the sound again.
MENU
select input
source
RETURN
return to
previous screen
P21065_INTRA_LED_MiniProjector_210719.indd 11 20/7/2021 3:30 PM
12
USB IN
Insert a USB-device into the USB port at the back of the
projector.
Use the navigation panel on top of the projector or the
navigation ring on the remote control to select
PICTURE MUSIC VIDEO or TXT(
document mode)
Conrm you choice with OK.
HDMI IN
Connect the projector and an external source device with
the HDMI cable.
Use the navigation panel on top of the projector or the
navigation ring on the remote control to choose HDMI
Conrm you choice with OK.
The signal of the source device will be projected.
P21065_INTRA_LED_MiniProjector_210719.indd 12 20/7/2021 3:30 PM
13
PROJECTION SETTINGS
Use the navigation panel on top of the projector or the
navigation ring on the remote control to choose
SETTINGS
Under SETTINGS, use the navigation panel on top of the
projector or the navigation ring on the remote control to
select:
Time Volume Projection Mode
Brightness Language Upgrade
Conrm you choice with OK.
AUDIO OUT
To use external speakers or headphones, insert their
3.5mm plug into the AUDIO OUT jack at the back of the
projector.
The sound will be transmitted through your external
speakers or your headphones.
P21065_INTRA_LED_MiniProjector_210719.indd 13 20/7/2021 3:30 PM
14
TIME SETTINGS
Settings → Time → OK
Use the navigation panel on top of the projector or the
navigation ring on the remote control to set or change time
and date.
Use the left and right cursor
to select year - month - day - hour
- minutes.
Use the up and down cursor
to set the date and the time.
Press
to nish the date and
time setup and to return to the
SETTINGS menu.
P21065_INTRA_LED_MiniProjector_210719.indd 14 20/7/2021 3:30 PM
15
VOLUME SETTINGS
Settings → Volume → OK
Use the navigation panel on top of the projector or the
navigation ring on the remote control to adjust the volume.
Use the right cursor
to increase the volume.
Use the left cursor
to decrease the volume.
Press
to return to the
SETTINGS menu.
P21065_INTRA_LED_MiniProjector_210719.indd 15 20/7/2021 3:30 PM
16
PROJECTION MODE
Settings → Projection Mode → OK
Depending on the position the projector is
in, select the appropriate projection mode.
Front Projection Rear Projection
Rear Ceiling ProjectionCeiling Projection
Press
to return to the SETTINGS menu.
P21065_INTRA_LED_MiniProjector_210719.indd 16 20/7/2021 3:30 PM
17
BRIGHTNESS SETTINGS
Settings → Brightness → OK
Use the navigation panel on top of the projector or the
navigation ring on the remote control to adjust the
brightness.
Use the right cursor
to increase brightness.
Use the left cursor
to decrease brightness.
Press
to return to the
SETTINGS menu.
P21065_INTRA_LED_MiniProjector_210719.indd 17 20/7/2021 3:30 PM
18
LANGUAGE SETTINGS
Settings → Language → OK
Use the navigation panel on top of the projector or the
navigation ring on the remote control to adjust the language.
Use the left and right cursor to select the language.
Conrm you choice with OK.
Press
to return to the SETTINGS menu.
CHINESE
UPGRADE
Settings → Upgrade → OK
Save new rmware on a USB-stick. Insert the USB-stick
into the USB port at the back of the projector.
Follow the prompts to upgrade.
P21065_INTRA_LED_MiniProjector_210719.indd 18 20/7/2021 3:30 PM
19
TECHNICAL DATA
1. Input Rating: 5V,2A(Max)
2. USB output rating: 5V,0.1A(Max)
3. fully charged in about 6 hours
4. Play time: up to 1.5 hours (80% brightness)
P21065_INTRA_LED_MiniProjector_210719.indd 19 20/7/2021 3:30 PM
5. Battery capacity:2500mAh
Other manuals for 43078004
1
Table of contents
Other KMART Projector manuals
