Kneader RS101 User manual

Thank you for purchasing this product.
Please carefully store this User’s Manual so that it is possible to retrieve it immediately when necessary.
Please use this product after thoroughly reading and understanding this User’s Manual.
This Machine finely sheets bread,pie,and cookie dough etc.
User’s Manual
Model Name : RS101
WASHABLE DOUGH SHEETER

● DO NOT put your fingers in the roller section when
operating the handle.
● Be careful not to let your hair get caught in it.
There is a risk of injury.
DANGER
●DO NOT allow children to use it alone, or use it within the reach of young children.
There is a risk of injury.
Be sure to leave the handle off when not in use.
DANGER
● DO NOT allow more than two people to operate at the same time.
There is a risk of injury.
DANGER
● NEVER attempt to disassemble, repair, or modify the unit except for dedicated
replacement parts.
There is a risk of injury or damage.
●CAUTIONS ON USAGE
Can lead to serious injury or death.
Warning
Can lead to harm to persons or
damage to property.
Warnings are written in
or near drawings.
Ex. Left drawing:
DO NOT take apart.
Caution
Store instructions in an easily accessible place after reading thoroughly.
The content below consists of important safety instructions to prevent harm or damage to
yourself or others. Please be sure to follow instructions.
● ABOUT THE SYMBOLS
The meanings of the symbols are as follows:
SAFETY PRECAUTIONS Please Always Follow
DO NOT
disassemble.
WARNINGS

0～17.5mm
5mm or less can be adjusted in 1mm increments.
Roller Intervals
Diameter 32mm × Length 300mm
Roller Measurement
approx. 4.5kg
Main Unit Weight
approx. W 1,100mm×D 490mm
Work space
W 830mm × D 490mm × H 200mm
Dimensions (Assembled )
W 140mm × D 375mm × H 200mm
Dimensions (When stored)
WASHABLE DOUGH SHEETER / RS101Name / Model name
The main specifications of this product are as below:
SPECIFICATION
● DO NOT use abrasive cleansers or solvents.
It may cause scratching.
●NEVER use bleaching agents.
This may cause discoloration and corrosion.
●DO NOT wash in the dishwasher.
It may cause damage.
●DO NOT flatten too thick, frozen dough or anything other than food with
the machine.
Turning the roller handle forcibly may result in injury or damage.
DANGER
● DO NOT use the product on unstable or unlevel surfaces.
● DO NOT drop or make physical impact on the machine.
May cause injury or damage.
DANGER
● Turn the roller handle when it is fully inserted.
If the roller handle is not inserted properly, it may come off and cause injury.
● If the machine moves during use, hold the carrying bar.
● When carrying, please hold the carrying bar.
If you hold or press down on any part other than the carrying bar,
you may injure yourself with the metal corners.
Country of origin JAPAN
DANGER
※ For product improvement, part of the specifications and appearance are subject to change without notice.
Please be aware of this in advance.
SAFETY PRECAUTIONS (cont’d)
CAUTIONS

Guide Bar
PARTS BREAKDOWN
Positioning Hole
Thickness Adjustment
Knob
Thickness Adjustment
Knob
Roller Handle
Sheeter Board
（600mm×300mm)
※ Sold separately
Carrying Handle
Roller Arm
Guide Plate
Lower Roller
Upper Roller
Positioning Hole
（Number on scale is approximate thickness of dough）
Thickness Adjustment
Knob
Thickness Adjustment
Knob
Sheeter Board
※ Sold separately
Roller Handle

4 While lightly pushing the Sheeter Board ① turn the handle ② in the same direction.
・Lower the Upper Roller down one position aftereach round trip, until the dough
is at the desired thickness.
Hold the Carrying Handle if
the Machine moves while
sheeting the dough.
Adjust the Upper Roller height
by pulling both Thickness Adjustment
Knobs outwards.
3 Place the dough on Sheeter Board. Lower the Upper Roller until it touches the dough.
・The left and right Thickness Adjustment Knobs should be set at the same height.
・The scale on the inner side of the Guide Plate is a guide to the thickness of the dough.
2 While pulling out both Thickness Adjustment Knobs ①move the roller arm ②to
the highest position. Insert the Sheeter Board ③between Upper and Lower Roller.
HOW TO USE
1 Attach the Guide Bars to both sides of the Main Unit, and insert the Handle all the way
into the Main Unit.
Insert the Guide Bars into the holes
in the Main Unit (both sides). Insert the Handle all the way in.
①
①
②
③
①
②

CLEANING
●Normal cleaning
① Wipe with a water-soaked dishcloth.
② Wipe off the water with a dry dish towel and let it dry.
●Cleaning for heavily soiled surfaces
① Wash the main unit with a sponge moistened with dish soap, and then rinse well
with lukewarm water.
② Wipe off the water with a dry dish towel and let it dry.
< CAUTIONS >
・
DO NOT
use polishing powder, metal scrubbers, etc., as they may damage
the surface.
・
DO NOT
use bleach. It may cause discoloration or corrosion.
・
DO NOT
immerse and wash the Main Unit and Sheeter Board.
・
DO NOT
put in the dishwasher.

Japan Kneader Co., Ltd.
3001-3, Kuzuhara Fujisawa Kanagawa 252-0822 Japan
https://kneader.jp/en/
Please inquire at shop where purchased for consultations about repairs,handling and
the purchase of parts,etc.
AFTER-SALES SERVICE
Date of purchase
YearDayMonth / /
Serial number
Memo
SER #