Knight KNIGHT 1030 User manual

ABBREVIATIONS
Assy ..........................................Assembly
A/R ............................................ As Required
B ................................................Bolt
Brg .............................................Bearing
BSN ...........................................Before Serial Number
Btm ............................................Bottom
C-Bolt ........................................ Carriage Bolt
Cttr.............................................Cotter
CV .............................................Constant Velocity
Deg ............................................ Degree
Dia ............................................. Diameter
ea ..............................................Eac
eq or Equiv ................................. Equivalent
Fln ............................................. Flanged Lock Nut
Fw .............................................. Flat Was er
Ga .............................................. Gauge
Gr or Grd ....................................Grade
Hd ..............................................Head
Hyd ............................................Hydraulic
ID ...............................................Inside Diameter
Ill or Illus .................................... Illustration
Ind .............................................. Indicator
Kw .............................................Keyway
LH ..............................................Left Hand
Ln ..............................................Lock Nut
Lw ..............................................Lock Was er
Mtg Hrd ......................................Mounting Hardware
NC .............................................National Coarse
NF .............................................. National Fine
NPT ........................................... National Pipe T read
OD .............................................Outside Diameter
Pc(s) ..........................................Piece(s)
PD ............................................. Pitc Diameter
PTO ...........................................Power Takeoff (s aft)
Q or Qty ..................................... Quantity
Reg Mac ..................................Regular Mac ine
RH .............................................Rig t Hand
SN ............................................. Serial Number
Spk, or Spkt or Sprkt ................. Sprocket
Sq ..............................................Square
SS .............................................Stainless Steel
SSB ...........................................Stainless Steel Bolt
St ...............................................Straig t
Std .............................................Standard
STS ...........................................Self Tapping Screw
UASN ........................................Used After Serial Number
UBSN ........................................Used Before Serial Number
W...............................................Wit
W/O ...........................................Wit Out

BOLT GRADES
USING THIS SERVICE PARTS LISTING
T is listing uses a number indentation system to
specify t e parts of an assembly.Any number w ic
is indented to t e rig t, indicates t at it is a compo-
nent of t e item to t e upper left. Example:
Part no Qty Description
102-AAA # Assembly A
102-BBB # Sub-Assembly B
(Component of A)
140-xxx # Sub-Component of B
140-xxx # Sub-Component of B
102-CCC # Sub-Assembly C
(Component of A)
etc.
Using t is system, t e subassemblies and t eir
components are included if an Assembly is ordered.
Similarly, t e components of a subassemblies are
included if a subassembly is ordered.
T e quantity (Qty) associated wit an assembly,
represents t e number of times an assembly could be
s own in t e drawing. T e subassembly quantity
owever, is t e number of times a subassembly is
used to build one assembly. Similarly, t e component
quantity refers to t e number of times a given compo-
nent is found in one subassembly.
MODEL AND SERIAL NUMBER INFORMATION is
located near t e front left and corner (Fig. A). T e
model number, serial number and part number s ould
be known w en asking service personnel for parts.
If you cannot find t e part you need, be as descriptive
as possible w en placing an order:
Sprockets: give t e bore size, number of teet ,
and size of keyway.
Roller chain: give t e size of c ain (stamped on
t e side of eac link) and number
of links.
Shafting: give t e diameter, lengt , and quantity
and size of keyways.
Hardware is generally not included wit parts.If you
need any ardware, c eck t e size, t e lengt , and
t e grade (Fig. B), t en c eck t e ardware list in t is
manual for t e part numbers.
All hex hea bolts are gra e 5, an nuts are
gra e B unless otherwise state .
T e ardware listing also includes listings for zerks,
cotter pins, set screws, and roller c ain links.
The illustrations in this manual are meant to be
use only as a gui e for i entifying parts an
locating their relative positions.
KNIGHT MANUFACTURING CORP.
1501 West 7th Ave. Brodhead WI 53520-0167
701 Cherry Ave. Greeley Co. 80632