Knoedler Air Chief Low-Rider User manual
Fax: 450-445-0086
OPERATING INSTRUCTIONS
AIR-CHIEF-
“LOW-RIDER”
1. Front Adjustable Armrests (Rotate knob to set arm resting point)
2. Backrest Adjuster (Rotate to adjust to comfortable position – lay flat)
3. ICP- Install tetherbelt system here
4. Side Bolster Adjustment (Press and hold “+” to tighten back cushion side
bolsters, Press and hold “-“ to widen back cushion side bolsters)
5. Air-Lumbar Controls (Press and hold “+” to increase lumbar support, Press
and hold “-“ to decrease lumbar support)
6. Seat Height adjustment control
a. Press on arrow tip to raise seat.
b. Press on arrow origin to lower seat
7. Isolator Lockout Control (Push left to Lock; Push right to unlock) {NOTE:
Isolator does not work when there is no air in the suspension system}
8. Cushion Extension and Angle Adjustment (Lift up and pull out to adjust in 3
positions, Lift up and push in to shorten cushion)
9. Seat fore and Aft Adjustment (Pull lever to left to unlock and slide seat to
desired position. Please make sure seat is locked into position after adjusting.)
Fax: 450-445-0086
“LOW-RIDER” SERVICE PARTS LISTING
Key PARTNO. Qty Description Key PART NO. Qty Description
7034 1SLIDE-SLAVE-SERVICE-9200 32 730083-000 1SWITCH-ELEC-POWER_RH-SERV-9800
9417 1CAP-LUMBAR-LOWER-BAG-SERVICE-9400 21 730084-000 1SEAT_BELT_KIT_3PT_ELE_9IN_CABLE
BUCKLE_BLACK_PRT_98
9418 1CAP-LUMBAR-UPPER-BAG-SERVICE-9400 89400-04 1VALVE-LUMBAR-LH-SERVICE-9400
9421 1SLIDE-SLAVE-SERVICE-9400 49400-600 1Comfort Front Adjust. Armrest Right
730085-000 1ADJUSTER-BACK-COMPLETE-SERVICE-9800 49400-61 1SEATFRAME-SERVICE-9400
87133 1SPRING-CUSHION-SERVICE-9200 39800-325-CH- XXX 1BACK-SERV-MB-LRC-98-CHIEF
87134 1DISC-RETAINER-BACK-ADJUSTER-SERVICE-9200 39800-326-CH-XXX 1BACK-SERV-HB-LRC-98-CHIEF
87135 1HANDLE-BACK-REST-ADJUST 19800-326-LR-LXX 1BACK-SERV-HB-LRC-98-LORIDE-ULTRA-
LEATHER
20 87161 1CAP-BACK-ADJUSTER-BLACK-SERVICE-9200 19800-326-LR-XXX 1BACK-SERV-HB-LRC-98-LORIDE
20 94253 1COVER-HANDLE-LOCKOUT-RED-SERVICE-9400 29800-325-GC-LXX 1BACK-SERV-MB-LRC-98-GRCHIEF-
ULTRA-LEATHER
5730004-000 1RECLINER-TRIM-RH-SERV-92 29800-325-GC-XXX 1BACK-SERV-MB-LRC-98-GRCHIEF
17 730008-098 1SHOCK-KIT-98-MEDIUM-SERV-98
16 730011-000 1ROLLER-BEARING-PIN-KIT-SERV-98 PZ002015 4PUSHNUT-SERVICE-9200
15 730012-000 1UPDOWN-LUMBAR-LH-VALVE-KIT-SERV-98
13 730014-004 1UP-DOWN-BUMPER KIT-4IN-SERV-98 11 730024-000 1RISER-BUSINESS-CLASS-KIT-SERV-98
12 730016-000 1CUSHION-BRACKETRY-KIT-SERV-CF 18 RR00-2201-000 1RISER-BOX-2.25-TRAY-SERVICE-9800
10 730018-000 1SEAT-FRAME-KIT-SERV-98-CF 730087-000 1 RECLINER_KIT_RH_98_SERV
730600-000 1 DISC_AIR-SPRING_SUPPORT_SERVICE_P005 730023-004 1SUSP-4IN-ISO-SSH-SERV-98
730504-000 1 AIR SPRING-(P)
6730028-000 1VALVE-UP-DOWN-ELEC-LH-SERV-98
730036-021 1CONSOLE-KIT-RH-STANDARD-UPD-GRA-PLA-
SERV-98
9730070-000 1VALVE-KIT-UP/DOWN-LUMBAR-RH-PRIMUS-SERV XXX- Add Color Material Code
8,9 730073-000 1VALVE-KIT-UPD-FAS-LH-PRIMUS-SERV-98
7730074-011 1CONSOLE-KIT-LH-GRA-ABS-UPD-AL-SERV-9800
7730074-611 1CONSOLE-KIT-LH-BLK-ABS-UPD-AL-SERV-9800
33 730074-635 1CONSOLE-KIT-LH-BLK-ABS-UPD-FAS-SWCH-SERV
-
9800
730075-000 1AIR-LUMBAR-SERVICE-98
730076-000 1SIDE-BOLSTER-SERVICE-98
730076-000 1SIDE-BOLSTER-SERVICE-98
Customer Service: 80
“LOW
-
0-550-1150
,
Fax:
4
-
RIDER”
SE
,
www.knoe
4
50-445-00
8
SE
RVICE P
A
dler.com, i
n
8
6
A
RTS LIS
TI
n
fo@knoedl
e
TI
N
G
e
r.com
Fax: 450-445-0086
OPERATING INSTRUCTIONS
“LOW-RIDER”
Seat Cushion & Backrest Cushion Ordering Information
1. The backrest assembly includes the frame, foam, upholstery cover and the
back adjuster.
2. The seat cushion assembly, includes the seat board, foam, upholstery cover
and tilt bracket hardware.
3. To order the correct Backrest or Seat cushion assembly, select the base
number from the service parts list. Replace the (x) in the part number with a
selection from the trim code table shown below.
Example: To order a high back cushion in black Ultra-Leather upholstery
you would order a “9800-336-L21”.
GRAND-CHIEF and LOW-RIDER SERIES TRIM CODE TABLE
Color
Code Cloth Velour S-Leather Leather
Black -T31 -C51 -L01 -L21
Brown -T38 -C32 -L02
Blue -T36 -C34
Grey -T33 -C55 -L04 -L24
Red -T32 -C56 -L05 -L25
Armrest Installation Instructions:
1. Locate the armrest bracket on the backrest, this is located under the upholstery.
2. Locate the top two threaded holes in the bracket. Top hole in the bracket is located 6.25 in above
the bottom of the back frame tube. Only two bolts are required to fasten the armrest to the back
frame.
3. Pierce the upholstery (keep hole as smll as possible) so the armrest bolts can be installed into the
treaded holes in the back frame. Two holes must be piereced in the upolstery for each amrest.
4. Install a bolt (M8X1.25-30mm) through the middle hole of the armrest bracket. Install the thick
flat washer on the bolts between the armrest bracket and back frame.
5. Align the bolt with the top hole in the backrest frame. Install the bolt into the back frame and
tighten until it is engaged, (4-5 turns), do not yet tighten securely.
6. Install the second bolt into the bottom hole of the armrest bracket. Install the thick flat washer on
the bolt between the armest bracket and the back frame.
7. Algin the bolt (M8X1.25-30mm) with the remaining hole in the backrest frame. Install the bolt
into the back frame and tighten until the armrest bracket is drawn against the back frame.
8. Tighten the top bolt securely.
9. Tighten the lower bolt securely.
10. Repeat steps 1 through 9 for armrest on the opposite side.
Other Knoedler Car Seat manuals
