Knog Cobber User manual

QUICK START GUIDE

100%
CHARGE BEFORE
FIRST USE

OPERATION
Long press the power button to
turn light on and o.
Short press to cycle between
modes.
When the LED ring around the
power button lights up, the battery
is low.
The LED ring glows red when
charging, and glows green when
the Cobber is fully charged.

FITMENT
3 Straps included
in each pack
Cobber Front & Rear
1. SML: Ø 22-27MM
2. MED: Ø 27-32MM
3. LRG: Ø 32+MM
1.
2.
3.

EYESAVER MODE
FRONT LIGHT:
Top channel disables
in Eyesaver mode.

MODEMAKER
Knog’s ModeMaker app allows
you to update the modes for
Cobber bike lights. Simply
download the software from
knog.com.au, plug your light in,
using the supplied USB-A
extension cable*, then select and
tailor modes from the menu.
1. Download the app from
knog.com.au/modemaker
2. Plug the light in and follow
on-screen prompts to register
your product.
3. Follow tutorial to update your
modes.
* Cable included in Mid & Big Cobber pack only.

MOUNTING
1. Hook silicone strap into one side of
the mount. Pull around the seat
post or steerer tube and secure
strap in opposite hook.

MOUNTING
2. Slide Cobber onto mount.
Ensure that it snaps into place.

MOUNTING
3. Place on
seatpost or
steerer for
330˚ beam &
vertical flash.
patterns.
Place on handle-
bars using
Eyesaver mode.

For more information and updates go to
KNOG.COM.AU
Go to Cobber video
This light is guaranteed for 2
years against manufacturing
defects only.
The battery is guaranteed for 6
months against manufacturing
defects only. See the website for
more details.
WARRANTY
INFORMATION