KOBLE ARC User manual

ARC LED light with Wireless Charging
User Manual
Product Illustration
Please read this user manual carefully before use. We
suggest you retain the user manual for future reference.
1. Power Adapter x 1
2. Instruction manual x 1
3. Main body
Parts Included
Main Features and Technical Data
Wireless Charging
Operating Instructions
●
●
●
●
●
●
●
●
●
●
●
●
Power supply: input AC100-240V 50/60Hz, output
DC12V/2A
Rated power of product: 21W
Rated power of lamp: 6W
Dimming type: Capacitive touch control ON/OFF key,
5 levels dimming
Timing shutdown: Smart timing lights (on/off
auto-control)
Light source: 48 pcs High photosynthetic efficiency
semiconductor LED
Three light modes switch: natural light-white
light-yellow light
Color temperature: 2700-6500K
Color rendering index (CRI): Ra≥90
Max illuminance: ≥1000LUX (The Intensity of
Illumination measured from the lamp perpendicular to
the table top 33cm distance)
Wireless charging output: 10W (MAX)
1. Plug in the lamp and press the “ ” symbol to turn on
the LED light. The default setting is a bright natural light.
Press “ ” to turn off the light.
2. To change the light modes, press the “ ” button to
switch between natural light — white light — yellow light.
3.To adjust the lamp brightness, press the “ ” or “ ”
buttons.
4. To set the 40 minute default timer function, press and
hold the “ ” button. The light will remain on for 40
minutes. The timer function can be cancelled by pressing
and holding the “ ” button.
5. When adjusting the lamp angle, always hold the base
firmly with one hand, which changing the angle with the
other.
IMPORTANT - The angle can only be adjusted directly up
or down. Never try to twist or rotate the lamp holder as
damage may occur.
M
1. The wireless charging function is active whenever the
lamp is connected to a mains power supply.
2. To charge a compatible mobile phone with wireless
charging technology, locate the phone directly on top of
the charging icon in the centre of the base plate.
3. Charging will begin immediately and the charge status
will be displayed on the phone as normal.
4. The wireless charging indicator light will illuminate
green during charging.
5. If the indicator light flashes red, wireless charging is not
functioning correctly.
6. When wireless charging is complete, the indicator light will
iOS – illuminate green
Android – Illuminate red and green
7. Lamp and charging can be used at the same time.
8. Some phone cases may inhibit the wireless charging
function. If necessary remove the phone case to improve
charging efficiency.
9. Do not place any other metal products or magnets onto
the base during charging as this will effect the function.

After Sales Support/ Product Returns
Caution / Warnings (Please read)
1. The power transformer is DC12V/2A. If the transformer
or cable are damaged DO NOT USE! Contact the supplier
for further advise or replacement – Contact details
provided at the end of the guide.
2. This product is for indoor use only!
3. This product MUST be kept away from any moisture or
extreme temperatures. Damage will occur if this is not
observed.
4. Never look directly into the LED light area.
5. The normal function may be affected, if the product is
exposed to strong electromagnetic currents.
6. Please avoid excessive or repeated adjustment of the
lamp head,as this will result in deterioration or even
failure of the silicone components. Do not force the
shade or adjustable stem past their stop point or damage
will occur.
7. The LED lights inside the lamp head cannot be
replaced. If these fail, the whole lamp must be replaced.
8.Wherever possible, the lamp should be disposed of in an
environmentally responsible way. Contact your local
government office for disposal or recycling options in
your local area.
7. Lamp and charging can be used at the same time.
8. Some phone cases may inhibit the wireless charging
function. If necessary remove the phone case to improve
charging efficiency.
9. Do not place any other metal products or magnets onto
the base during charging as this will effect the function.
In the unlikely event that you need to return the unit
because it is faulty, please follow the ‘Product Returns’
instructions at www.kobledesigns.com website.
Should you need to request replacement parts, please
contact our after sales support team at:-
Email – [email protected]
Tel: + 44 (0)1799 513 466
Address: Koble Designs, 6 The Shires, Shirehill industrial
Estate, Saffron Walden, Essex, CB11 3AP